hello all. Very weird software problems converting files freemake and More.

[yori 123]

Hello, First of all I want to apologize for my bad english (hope it will be possible to understand what I write). The software change abruptly

I'm using software for many years, software is excellent and very useful and important.
Two months ago, a strange change in the parameters of the Software (all versions I've tried, including old), I usually use this format {frame size: custom width: 784 height: 572 adjustment: original video codec: H.264 frame rate: original bitrate type: auto Audio Not relevant} (almost regularly).

When i run the video back and forth, he was arrested (image goes slowly) and it was not like that until two months ago, what I want is that the data file will return to what it was two months ago and not as now,
I want data now converted files will be the same as the data that was two months ago, I do not understand how it has changed ??? I did not change anything.
How to solve this problem ??? What it was created? I even tried other computers, and exactly the same problem, I even tried formatting the computer clean and still the same problem ... very strange!

Please help urgently, it is important to have a solution. Below are data files (as the first is good old file, and the other is problematic data file)

Thank you very much.

************************************************** ************************************************** ************************************************** ************************


These old file data (good) data are perfect for me and that's how it was until two months ago, (I will mention again, I did not change anything)


General
Complete name : G:
Format : AVI
Format/Info : Audio Video Interleave
Format profile : OpenDML
File size : 1.07 GiB
Duration : 1h 8mn
Overall bit rate mode : Variable
Overall bit rate : 2 227 Kbps

Video
ID : 0
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L3.1
Format settings, CABAC : Yes
Format settings, ReFrames : 1 frame
Format settings, GOP : M=1, N=15
Codec ID : H264
Duration : 1h 8mn
Bit rate mode : Variable
Bit rate : 1 991 Kbps
Maximum bit rate : 5 943 Kbps
Width : 784 pixels
Height : 572 pixels
Display aspect ratio : 1.371
Frame rate : 25.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.178
Stream size : 982 MiB (89%)

Audio
ID : 1
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 3
Mode : Joint stereo
Mode extension : MS Stereo
Codec ID : 55
Codec ID/Hint : MP3
Duration : 1h 8mn
Bit rate mode : Constant
Bit rate : 128 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Compression mode : Lossy
Stream size : 63.1 MiB (6%)
Alignment : Aligned on interleaves
Interleave, duration : 24 ms (0.60 video frame)
Writing library : LAME3.98.4××××





************************************************** *************************************





And these new file data (problem) What caused this change? Note that at the end of the data (there are numerous)


General
Complete name :
Format : AVI
Format/Info : Audio Video Interleave
File size : 17.2 MiB
Duration : 1mn 8s
Overall bit rate : 2 116 Kbps
Writing application : Lavf54.63.104

Video
ID : 0
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L3.1
Format settings, CABAC : Yes
Format settings, ReFrames : 1 frame
Codec ID : H264
Duration : 1mn 8s
Bit rate : 1 980 Kbps
Width : 784 pixels
Height : 572 pixels
Display aspect ratio : 1.371
Frame rate mode : Variable
Frame rate : 25.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.177
Stream size : 16.1 MiB (93%)
Writing library : x264 core 129
Encoding settings : cabac=1 / ref=1 / deblock=1:0:0 / analyse=0x1:0x131 / me=dia / subme=2 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=0 / me_range=16 / chroma_me=1 / trellis=0 / 8x8dct=0 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=0 / threads=2 / lookahead_threads=1 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=0 / weightp=2 / keyint=250 / keyint_min=25 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=abr / mbtree=1 / bitrate=1980 / ratetol=1.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / ip_ratio=1.41 / aq=1:1.00

Audio
ID : 1
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 3
Mode : Joint stereo
Mode extension : MS Stereo
Codec ID : 55
Codec ID/Hint : MP3
Duration : 1mn 8s
Bit rate mode : Constant
Bit rate : 128 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Compression mode : Lossy
Stream size : 1.04 MiB (6%)
Alignment : Aligned on interleaves
Interleave, duration : 24 ms (0.60 video frame)
Writing library : LAME

[Baldrick]

I would guess that

Frame rate mode : Variable
Frame rate : 25.000 fps

may cause "image goes slowly"-problems.

Try change the frame rate mode to constant framerate in your encoder like handbrake, vidcoder, etc.

[yori 123]

hi
Unfortunately my English is really bad. Sorry but I guess I did not explain well, my intention is when I run fast in the video (not the normal speed) Anyway there is a problem in the data file.
I've done everything possible (according to my knowledge, and I mean) so I can say with certainty that there is a complex problem that these internal settings are probably some location or computer software, or even the core of the software. It happened to me that all computers and all versions.

It is discouraging

Thank you Baldrick.