DVD Shrink error

[pbguy1211]

I've encountered an error using DVD Shrink recently, and I don't quite understand why. When I get home I can get the exact error, but let me at least explain it.
I recorded some stuff on my DVD recorder on a +RW. Then I took it to my comp, saved it to the hard drive via DVD Decrypter. And then I usually burn it to a -R. The problem comes in now AFTER the temp files are created, right as it is about to burn I get the error.
I've done a few things recently, let me know which might have caused this:
I changed my video driver, but I rolled it back and it didn't help.
I installed a new video game.

Then I tried to update Nero, but that didn't help either.

Any ideas why it just crapped out all of a sudden???

thanks for any help

[ed_mc7]

What is the error msg.????

[Sifaga]

maybe a burning issue with nero

you could try using dvddecrypter to do the burning

[pbguy1211]

this is the error...


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.13
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 13c

Recorder: <_NEC DVD_RW ND-1300A> Version: 1.09 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : ST3160023A atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800BB-75CAA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : MITSUMI CR-4801TE atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
_NEC DVD_RW ND-1300A E: CDRom0
MITSUMI CR-4801TE F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 766MB (785200kB)
Free physical memory: 518MB (531396kB)
Memory in use : 32 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.5.2005
NeroAPI
1:32:41 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

1:32:41 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

1:32:41 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

1:32:41 PM #4 Text 0 File Reader.cpp, Line 127
Reader running

1:32:41 PM #5 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-1300A running

1:32:41 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

1:32:41 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

1:32:42 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

1:32:42 PM #9 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media

1:32:42 PM #10 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 298063 ( 66:14.13, 582MB)

1:32:42 PM #11 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO

1:32:42 PM #12 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193

1:32:42 PM #13 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

1:32:42 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 298064 (298064) = #298064/66:14.14
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 298064 blocks [_NEC DVD_RW ND-1300A]
--------------------------------------------------------------

1:32:42 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [_NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 610435072, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
298064 | lead-out | 1 | 0x41 | 0x00

1:32:42 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

1:32:42 PM #17 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.

1:32:42 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

1:32:42 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)

1:32:42 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

1:32:42 PM #21 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode

1:32:42 PM #22 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON

1:32:42 PM #23 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes

1:32:42 PM #24 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

1:33:06 PM #25 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x05670000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

1:33:06 PM #26 CDR -1106 File Writer.cpp, Line 311
Power calibration error

1:33:06 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

1:33:06 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

1:33:06 PM #29 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was -1

1:33:06 PM #30 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)

1:33:06 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

1:33:06 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=6.1.0.88 , size=24698 bytes, created 5/22/2003 1:20:36 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 6:02:00 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[Richard_G]

The reason is there in the log, almost at the bottom, just before it stopped. Power Calibration Error. This means one of two things, crap media, which is a possibility as you are using Ritek G04 which has taken a dive in quality just recently, or your writer is dying. If you do a search for Power Calibration Error, you should find quite a few threads on this subject.

[pbguy1211]

it's got to be the drive then. since i'm using a spindle of 50 and it's only somewhere in the middle. and the others have all been fine.

crap... seems i need a new drive...

[Cinemagic]

Try another disk before you count your drive out. I had three bad disks in a spindle of 100. Towards the end and all in a row. Fourth disk was okay and all subsequent ones were, too.

[pbguy1211]

i'm going to use roxio to make a crap dvd later, and if that doesn't work either, then i know it's the drive.