Hey guys, I got my new burner and it's broken. It literally is a cupholder now. It always stays in the eject mode. Everytime I push it in it comes back out. The computer senses it, but it wont' stay in long enough to read anything! It waits five seconds and ejects again. This is terrible! Did I do something wrong?
+ Reply to Thread
Results 1 to 18 of 18
-
-
Just wanted to tell everyone the problem. The front of my Sony Vaio is very different from the average front where the dvd-rom bays are. I had to switch the face plates of my DRU700A because the black one is smaller and fits in the hole for the bays. I changed the tray face plate only and not the drive plate and evidently the black tray plate and white bay plate aren't compatable. Once it was black and black it worked fine...bizarre.
-
I had two DRU500AX both had problem's to me Sony suck's there burner's have more problem's then any other brand.
-
Originally Posted by spiderman2k1
Originally Posted by spiderman2k1 -
"-jsl-" click on my profile you will see I have over 1627. That why people post all the time that there Sony drive' are having problem's. And I'll post every time they suck. If you do not like my post there some thing you can try get a life!!!!!
-
Well I just don't think it's very helpful to bump a more than a week old thread with "Sony burners suck" when:
1) He didn't even own the same model as you had. The DRU-700A is based on complete different hardware (OEM Lite-On) than your DRU-500AX and the only thing they have in common is the Sony brand on the face plate.
2) He has already solved the problem.
3) You don't even explain why you think they suck.
But yeah, I'll try to ignore all your posts from now on. -
Sony is not even making there own burner's any more some are made by lite-on. There are alot of people that have ton's of problem with sony. I had two of them in two differnet PC's. Both had the same problem could not burn some media that Pioneer could burn with no problem. This tell's me there lense is junk. Also there software CD that came with there burner was crap. Some time when you install there software and rebot all your CD drive's are gone. There have been other post about this. Also my friend has the DRu500AX I told him not to install the Sony software you could lose your cd drive's. He one of those people in one ear out the other. He had to reformat his pc to fix it.
-
the sony faceplates come off if you push up on them. The ones on my 500's do, they are too big but if you take it off, it should fit better & there is still a plate behind it so dust can't get in.
-
I kinda agree with spiderman that sony sucks, in general they do. My Sony DV cam been to service too many times, the only brand of CD-rom i had that died was sony, got a broken Sony amp somewhere too (and i dont mind, the sound sucked anyway). But then i notice that spiderman got an LG (Low Grade?) dvd writer, so i cant see hes doing aything to improve his equippment
. At least Sony has some good products (as long as they work, thats not long in my experience) but LG??? How much i hate my 21" LG tv... The first one died the first day, no sound, and even if it was written stereo all over it the tuner was mono. But it WAS cheap, yes
-
Does the drive tray close flush? If it doesn't, or something is blocking it just a little it might open itself back up. But since I have no direct knowledge of the drive or your computer I have no idea. When in doubt return it.
Blah, blah, blah -
Sonys don't suck as much if you load proper (i.e., LiteOn) firmware onto them instead of the half-crippled firmwares that LiteOn wrote for its Sony rebadges.
-
Maybe I'm lucky, but I've had no problems at all with my quad format Sony burner (DRU-510). The only glitch I encountered was when I tried to use cheap BeAll DVD-R's from Meritline last year. I could not burn a full 4.4 GB on those and wound up making coasters out of about 10 of them before I figured that out (noob mistake). Fuji DVD-R's burn all the way to the edge for me every time and go on sale frequently at Best Buy.
-
could the new face plate be pressing the eject in some way
-
My DRU-510 works perfectly, as have all my Sony products.
If your Sony products dont work why not contact Sony?
I am sure they would want to look at your units. -
jameshgross is right actually
I have stated before in posts here, Sony has excellent customer service and fast repairs. After all, they are used to repairs, they are really good at that.
-
Originally Posted by jameshgross
Except JVC and Panasonic, other Japanese name brand consumer electronics have similar situation and results, only differences is Sony had a higher rate of failure due to its a leader of new products.Sam Ontario -
I have a DRU-510A that's been working perfectly for ~7 months. Think that one's made by Optorite? Also have a CRX-220E1 CD burner w/ hacked Liteon FW I use only for Mt. Rainier. That's over 1½ years old.
Someone mentioned Minidisc. Still have a MZ-R50 portable I bought in '99 and JE-920 home deck. Never had a problem w/ either.
And let's forgot 4 Betamax decks that are 16-20 years old and are all still going strong.Like a flea circus at a dog show! -
Originally Posted by Madz
Similar Threads
-
Broken or not broken hard drive?
By romanstopme in forum ComputerReplies: 3Last Post: 17th Sep 2009, 12:04 -
broken mp4
By Andy_B in forum Newbie / General discussionsReplies: 1Last Post: 15th Sep 2008, 15:43 -
help with broken TV...
By snadge in forum Newbie / General discussionsReplies: 5Last Post: 2nd Sep 2008, 12:03 -
Have you ever had a broken bone?
By yoda313 in forum PollsReplies: 29Last Post: 1st Sep 2007, 23:22 -
Forum is BROKEN!
By SLK001 in forum FeedbackReplies: 4Last Post: 19th May 2007, 04:06