VideoHelp Forum




+ Reply to Thread
Results 1 to 18 of 18
  1. Can anyone suggest a method of capturing super 8 movies so they can be edited, then added to other clips and finally burned to dvd?
    Quote Quote  
  2. Member jaxxboss's Avatar
    Join Date
    Apr 2003
    Location
    JAX, FL
    Search Comp PM
    Talk to DVDSTU on this Post, Im guessing he does this.
    https://www.videohelp.com/forum/viewtopic.php?t=188054&highlight=
    Quote Quote  
  3. What you need is a telecine machine. A good one is like 500 bucks on ebay.
    Quote Quote  
  4. Scratch that. Its more like 8k for a good one.
    Quote Quote  
  5. I found at a garage sale a projector to VHS tool. It cost about $5.00 (may take a shot at ebay). Then use a cap card (or preferably a set top dvd recorder) to pull it into your computer.
    Quote Quote  
  6. I've had pretty good luck with the next best method: project the movie onto a screen and use your camcorder to stream the video to your capture software. It's not perfect and you have to experiment with finding the best type of material for your screen and you may even have to use the deflicker filter in VirtualDub to remove the screen flicker but the results can be pretty good on a very low budget. I've seen a writeup on this somewhere but can't remember where at the moment. Good luck.
    Quote Quote  
  7. Member jaxxboss's Avatar
    Join Date
    Apr 2003
    Location
    JAX, FL
    Search Comp PM
    LOL, according to the MPAA, that may be illegal!
    Quote Quote  
  8. Thanks for the advice.....I wonder if there are people who have these expensive machines who do this professionally?

    All I have is about 15 minutes of film......

    Another question: what format should I have it captured in? AVI, MPEG2, ???
    Quote Quote  
  9. ".I wonder if there are people who have these expensive machines who do this professionally? "

    Yep, ten cents a foot usually, just try any photo or camera store. I was looking at some of my old stuff put in vhs that way with one of those special machines & the resolution isn't all that hot. Me thinks just projecting it on a white card should be just as nice.
    Quote Quote  
  10. Member
    Join Date
    Sep 2003
    Location
    United States
    Search Comp PM
    There are a number of online companies that will do it for you. I looked a while back, but I think tha total cost was about $60 for 6 reels. But I am not sure. You can find them by googling. I did have some done years ago and it worked well.
    Quote Quote  
  11. Member monoxide77's Avatar
    Join Date
    Aug 2002
    Location
    Cincinnati
    Search Comp PM
    Laserdiscs are cool, but laserdiscs on DVD-Rs are cooler.
    Quote Quote  
  12. Member
    Join Date
    Apr 2003
    Location
    Largo, FL
    Search Comp PM
    ".I wonder if there are people who have these expensive machines who do this professionally? "

    Yes there are. I know there are some online. I found a place near me that does it- cost me $80 to have 80 minutes converted ($1 per minute)
    Quote Quote  
  13. thanks....I will check them out!!
    Quote Quote  
  14. I have read many posts on this very subject and have experimented using various boxes of tricks. I have come to this conclusion: You can do no better than to project your image onto a plain white wall. Adust the distance between projector and wall so that you end up with a displayed image of approximately 8 inches square. Set up your video camera so that both camera and projector lenses are as near as possible on the same plane, both vertical and horizontal. Connect your camera to a monitor and make sure the projected image completely fills the screen. If you don't have a monitor, a flip-out LCD panel on your camera would suffice. Have all your camera settings on "Auto". Room must be as dark as possible. Start projector and capture the image with your camera. This is one instance where "Keeping it simple" will give you as good a result as any professional equipment costing thousands of dollars. Good Luck.
    Quote Quote  
  15. Peaceinourtime, yeah but then you have to deal with the sound of the projector getting on your copy.
    Quote Quote  
  16. Peaceinourtime wrote:
    Adust the distance between projector and wall so that you end up with a displayed image of approximately 8 inches square.
    Just wanted to ask if "8 inches square" is correct, or is it a typo? Seems like quite a small image to capture from. Also it would put the projector quite close ot the "screen", thereby increasing the parallax error between the projector and the camera.
    Quote Quote  
  17. One last question: what format should the converted super 8 movie be in?
    Clearly, I will want to edit it........

    thanks,
    Allen
    Quote Quote  
  18. Keep it uncompressed, or in HuffYUV.
    Quote Quote  



Similar Threads

Visit our sponsor! Try DVDFab and backup Blu-rays!