VideoHelp Forum

Try DVDFab and download streaming video, copy, convert or make Blu-rays,DVDs! Download free trial !
+ Reply to Thread
Results 1 to 3 of 3
Thread
  1. I have been following leebears instructions for converting AVI to SVCD and am having some problems.

    I completed the encoding using CCE and DVD2SVCD.

    I am now at the steps using VCDEasy.

    Question 1:
    ========
    My first problem was, how do I know what the name of the MPEG2 file is created by DVD2SVCD (see cut below)? I think it is bbMPEG_Muxed_File.mpg

    Question 2:
    ========
    I started VCDEasy V1.1.2 and selected the above file (following the instructions from www.vcdeasy.org website). It hung for 6 hours with the please wait at the bottom at the bottom and the graph moving back and forth. Finally, I had to restore the task. My goal is to use Nero to burn the SVCD (like leebear in his instructions). Is there something wrong with VCDEasy or am I doing something wrong?

    Thanks,
    Rick


    System: dell pentium 4, 750mHz, Win98SP2, DVD2SVCD 1.09b3, CCE2.5, VCDEasy 1.1.2 (I downloaded this today).




    Here is the log from DVD2SVCD:
    --------------------------------------------------------
    - 9/30/02 6:55:34 PM
    - AVI to SVCD Conversion
    - AVI2SVCD ver. 1.0.9 build 3
    --------------------------------------------------------
    Initializing
    Initializing finished.

    --------------------------------------------------------
    - 9/30/02 6:55:35 PM
    - Free on drive C: 9450.61 mb
    - AUDIO Extraction
    --------------------------------------------------------
    Audio extraction finished.

    --------------------------------------------------------
    - 9/30/02 6:59:15 PM
    - Free on drive C: 8856.52 mb
    - AUDIO conversion
    --------------------------------------------------------

    Converting Audio to MP2. Filename: C:\Program Files\DVD2SVCD\Rick\Extracted_audio_1.wav
    Executing BeSweet. Commandline:
    "C:\Program Files\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "C:\Program Files\DVD2SVCD\Rick\Extracted_audio_1.wav" -output "C:\PROGRA~1\DVD2SVCD\RICK\Encoded_audio_1.mp2 " -logfile "C:\PROGRA~1\DVD2SVCD\RICK\Encoded_audio_1.log " ) -ota( -g max ) -2lame( -e -b 224 -m s )
    Audio conversion of C:\Program Files\DVD2SVCD\Rick\Extracted_audio_1.wav finished.

    Audio conversion finished.

    --------------------------------------------------------
    - 9/30/02 7:08:40 PM
    - Free on drive C: 9395.80 mb
    - Video Encoding using Cinema Craft
    --------------------------------------------------------

    Executing Cinema Craft Encoder.
    StreamSectors: 771537788
    AudioSectors: 75450984
    VideoPAPO: 10782756
    ScanOffsetBytes: 76292
    SeqAligningBytes: 4848806
    DVDBytes: 0
    VideoEndHeader: 4
    SubtitleSectors: 0
    EmptySectors: 238.00
    PictureSectors: 0.00
    PureMPEGStream: 680378945.73
    Seconds: 2658.69
    CalcMPEGStream: 680378945.73
    Frames: 63577
    CDSize: 740.00
    Cut point 736.00
    Variable Settings:
    Frames: 63577
    Anti Noise Filter: Off
    Passes: 4
    Image Quality: 10
    VAF file creation: On
    Video Encoding Mode: Multipass VBR
    Min. bitrate: 300
    Max. bitrate: 2530
    Avg. Bitrate: 2047
    Aspect Ratio: 4:3 (No borders, encoded as 4:3)

    ---AVS Begin---
    LoadPlugin("C:\PROGRA~1\DVD2SVCD\MPEG2DEC\MPEG2DEC .DLL")
    AVISource("C:\MYMUSI~1\MONSTE~2.AVI")
    ConvertToYUY2()
    BicubicResize(480,464,.33,.33)
    AddBorders(0,8,0,8)
    ResampleAudio(44100)
    ----AVS End----

    Closing program
    CCE Max Speed: 0.630
    Video Encoding finished.

    --------------------------------------------------------
    - 10/1/02 12:57:47 AM
    - Free on drive C: 8572.80 mb
    - Video Pulldown
    --------------------------------------------------------
    Executing Pulldown. Commandline:
    "C:\Program Files\DVD2SVCD\pulldown\pulldown.exe" "C:\Program Files\DVD2SVCD\Encoded_Video_CCE_NTSC.mpv" "C:\Program Files\DVD2SVCD\Movie\Pulldown_Encoded_Video_NTSC.m pv"
    Video pulldown finished.

    --------------------------------------------------------
    - 10/1/02 1:04:55 AM
    - Free on drive C: 8085.78 mb
    - Converting Pictures from ES to PS
    --------------------------------------------------------
    Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
    --------------------------------------------------------
    - 10/1/02 1:04:57 AM
    - Free on drive C: 8085.77 mb
    - Converting Pictures from ES to PS
    --------------------------------------------------------
    Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
    --------------------------------------------------------
    - 10/1/02 1:04:59 AM
    - Free on drive C: 8085.77 mb
    - Multiplexing and cutting
    --------------------------------------------------------
    Saving bbMPEG settings: C:\Program Files\DVD2SVCD\bbMPEG\default.ini
    Offset in Seconds: 0
    Executing bbMPEG.
    Variable Settings:
    Movie offset: 0 seconds
    Cut point: 736 mb

    Executing RunbbMPEG. Commandline:
    "C:\Program Files\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "C:\Program Files\DVD2SVCD\bbMPEG_Muxed_File.mpg"
    Multiplexing and cutting finished.

    CD-Image creation finished.

    --------------------------------------------------------
    - 10/1/02 1:14:37 AM
    - Free on drive C: 7347.38 mb
    - SVCD Creation finished!
    --------------------------------------------------------
    [/quote]
    Quote Quote  
  2. For those that like to hear me talk to myself ...

    For some reason once I rebooted my PC, I was able to get VCDEasy to run and create the bin and cue files.

    So, now I am off to search how to burn with Nero. I am making progress, slowly.


    Here is the results from VCDEasy:
    [Internal Xml Generation]
    Internally computed XML generated successfully as "C:\Program Files\DVD2SVCD\Rick\videocd.xml"

    [VCDxBuild.exe]
    GNU VCDImager 0.7.12
    initializing libvcd 0.7.12 [cygwin/i686]

    this is the UNSTABLE development branch!
    use only if you know what you are doing
    see http://www.hvrlab.org/~hvr/vcdimager/ for more information

    changed volume number to 1
    changed volume count to 1
    changed restriction number to 0
    changing 'next volume use sequence 2' to 0
    changing 'next volume use lid 2' to 0
    changed volume label to `SUPER_VIDEOCD'
    changed publisher id to `VCDEASY_V112'
    changing 'relaxed aps' to 0
    adding pbc (Selection-000/2)
    adding pbc (Selection-end/3)
    sequence count 1
    adding sequence #0, C:\Program Files\DVD2SVCD\bbmpeg_muxed_file00.mpg
    pts start offset 0.213367 (max pts = 2651.862367)
    playing time 2651.649000
    scanning mpeg sequence item #0 for scanpoints...
    already scanned... not rescanning
    pbc: psd size 56 (extended psd 0)
    iso9660: highest alloced sector is 232 (using 300 as isosize)
    OGT streams available: 0 0 0 0
    writing track 1 (ISO9660)...
    writing track 2, MPEG2, NTSC 2/3 D-1 (480x480/30fps), audio[0]: l2/44.1kHz/224kbps/stereo ...
    MPEG packet statistics: 298944 video, 32380 audio, 0 zero, 0 ogt, 1 unknown
    writting post-gap ('leadout pregap')...
    finished ok, image created with 331925 sectors [73:45.50]
    Quote Quote  
  3. Hi

    Why donīt u burn it with VCDEasy? Just put an CD-R into the slot and start encoding or (if u already have the cue/bin files) move to Tools and highlight the third map (i think ist the third). Then load the cue and burn it. Thats all!


    Good luck
    Diver
    Welcome - to the real world
    Quote Quote  



Similar Threads