DVD2SVCD Audio OUT Of Sync Problem!!!

[hgokuh]

Hi! I´ve been ripping some chapters from DVD´s the last month with DVD2SVCD without any problem, but since yesterday all the Audios´s in the MPG´s are out of sync!!! No mather if I use The Cinema Craft Encoder or the TMPGEnc, they are like 4 seconds out of sync! I re-installed the program but it keeps doing the same no mather what DVD I use. The only thing that I did, that I did not do before was to use the Telecide option for 2 PAL DVD´s, but I have not use that option again and like I said I uninstalled the program and installed it again. Can anyone help me?

[mrbass]

post your log..and don't say your didn't rip it with internal routines!

[hgokuh]

Here is the Log, I noticed that in the Audio Extraction saids:
Audio1 delay: -170 ms
Is that the problem, how can I solve it?

--------------------------------------------------------
- 02.07.2002 16:17:39
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.0.9 build 2
--------------------------------------------------------
Initializing
Initializing finished.

--------------------------------------------------------
- 02.07.2002 16:17:41
- Free on drive D: 2881.98 mb
- Internal rip
--------------------------------------------------------
Preparing vobfiles to be ripped:
- E:\VIDEO_TS\VTS_01_1.vob
- E:\VIDEO_TS\VTS_01_2.vob
- E:\VIDEO_TS\VTS_01_3.vob
- E:\VIDEO_TS\VTS_01_4.vob

Ripping: E:\VIDEO_TS\VTS_01_1.vob
Ripping finished. Speed: 10269

--------------------------------------------------------
- 02.07.2002 16:18:01
- DVD2AVI
--------------------------------------------------------
Creating DVD2AVI INI file:
- D:\Programme\DVD2SVCD\DVD2AVI\DVD2AVI.INI

Variable settings:
iDCT_Algorithm: 32-bit SSE MMX

Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"D:\Programme\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -CS=2 -YR=1 -EXIT -OF=[D:\Programme\DVD2SVCD\Movie\DVD2AVI_Project_file] -IF=[D:\Programme\DVD2SVCD\Movie\VTS_01_1.vob]
Analyzing DVD2AVI Project file
Force Film activated!
Framerate: 23976
DVD2AVI processing done.

--------------------------------------------------------
- 02.07.2002 16:18:15
- Free on drive D: 2873.26 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x80
Filename: D:\Programme\DVD2SVCD\Movie\Extracted_audio_1.ac3
Audio1 delay: -170 ms
Audio extraction finished.

--------------------------------------------------------
- 02.07.2002 16:18:33
- Free on drive D: 2873.26 mb
- AUDIO conversion
--------------------------------------------------------

Converting Audio to MP2. Filename: D:\Programme\DVD2SVCD\Movie\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"D:\Programme\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "D:\Programme\DVD2SVCD\Movie\Extracted_audio_1.ac3 " -output "D:\PROGRA~1\DVD2SVCD\MOVIE\Encoded_audio_1.mp 2" -logfile "D:\PROGRA~1\DVD2SVCD\MOVIE\Encoded_audio_1.lo g" ) -azid( -L -3db -c normal -g max ) -ota( -d -170 ) -ssrc( --rate 44100 ) -2lame( -e -b 128 -m s )
Audio conversion of D:\Programme\DVD2SVCD\Movie\Extracted_audio_1.ac3 finished.

Audio conversion finished.

--------------------------------------------------------
- 02.07.2002 16:19:37
- Free on drive D: 2873.26 mb
- Video Encoding using TMPGEnc
--------------------------------------------------------
- Encoding D:\Programme\DVD2SVCD\Movie\AviSynth_Script_file.a vs
StreamSectors: 771537788
AudioSectors: 2972396
VideoPAPO: 11905488
ScanOffsetBytes: 3846
SeqAligningBytes: 244416
DVDBytes: 0
VideoEndHeader: 4
SubtitleSectors: 0
EmptySectors: 238.00
PictureSectors: 0.00
PureMPEGStream: 756411638.70
Seconds: 183.22
CalcMPEGStream: 756411638.70
Frames: 4273
CDSize: 740.00
Cut point 736.00
Aspect Ratio: 16:9 (borders added, encoded as 4:3)

---AVS Begin---
LoadPlugin("D:\PROGRA~1\DVD2SVCD\SIMPLE~1\SIMPLE~1 .DLL")
LoadPlugin("D:\PROGRA~1\DVD2SVCD\MPEG2DEC\MPEG2DEC .DLL")
mpeg2source("D:\PROGRA~1\DVD2SVCD\MOVIE\DVD2AV~1.D 2V")
SimpleResize(480,360)
AddBorders(0,60,0,60)
----AVS End----

Executing TMPGEnc. Commandline:
"D:\Programme\dvdgenie\TMPGEnc Plus (Registered)\TMPGEnc Plus-2.53.35.130\TMPGEnc.exe" "D:\Programme\dvdgenie\TMPGEnc Plus (Registered)\TMPGEnc_Project_file.tpr" /Encode /Close
Video Encoding finished.

--------------------------------------------------------
- 02.07.2002 16:58:18
- Free on drive D: 2753.88 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: D:\Programme\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 02.07.2002 16:58:20
- Free on drive D: 2753.87 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: D:\Programme\DVD2SVCD\bbMPEG\default.ini
--------------------------------------------------------
- 02.07.2002 16:58:22
- Free on drive D: 2753.87 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: D:\Programme\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 2
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 736 mb

Executing RunbbMPEG. Commandline:
"D:\Programme\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "D:\Programme\DVD2SVCD\Movie\bbMPEG_Muxed_File.mpg "
Multiplexing and cutting finished.

CD-Image creation finished.

--------------------------------------------------------
- 02.07.2002 16:58:55
- Free on drive D: 2703.32 mb
- SVCD Creation finished!
--------------------------------------------------------

[hgokuh]

I found out whats happening but I don´t know why?
After the encoding, the chapter that I capture begins like 2 seconds later than where it begins in the DVD, but the sound stays the same so the final mpg is out of synch, can anyone help me?

[mrbass]

deselect any zero length chapters...1.0.9 build 3 does that automatically for you. If it's still you causing problems...look in the advanced reference for bbmpeg and change your startup delays.