Hey, I'm new here. I received old family cassettes (Video8) and would like to digitize them. I have a USB video grabber and a Sony camcorder (CCD-TR705E). When I insert the cassette, I can see the video in the viewfinder. The sound can also be heard via the computer. However, I don't see a picture or sometimes stripes that are red, green and blue.
Is there a way to get the black and white image out of the viewfinder?
Thank you very much for your help
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays!
+ Reply to Thread
Results 1 to 9 of 9
Thread
-
-
Most likely your tape's color standard is not compatible with your camcorder, Where are you located and what format the tape is?
-
Thanks for replying.
@Alwyn: Iīm using OBS Studio. I tried Potplayer, too. But it was the same result.
@dellsam34: Iīm located in Germany (Heidelberg). I donīt know what the format the tape is. How can I find out, which format it is? -
Did you got ANY video from the camera on TV or computer when not playing a tape?
Like a menu/OSD screen or the picture from the camera?
Have you used that camera before playing your own tapes on TV? -
No, i got no video. Sometimes I got some silhouettes, but with a lot Red green an blue distortions. But no I get no video at all.
And I havenīt used the camera before. I bought it on ebay to digitize old tapes.
I also have another problem: Now, the viewfinder shows also no video anymore. And if I connect the camcorder to the computer the mic from the camcorder will catch the actual audio and it is played at the computer. I thought, that cleaning the video head could help. What do you think? -
Probably you switched it now to camera mode and the lens is covered?
Also, did you already downloaded/read the manual?
Also be careful playing (valuable) tapes until you are certain the camera is operating correctly.
Before even thinking about cleaning the heads, first try to get something out of the camera displayed on a TV or capture device.
Possible your capture device is net set up properly for the correct input (S-Video/composite)?
And what capture device are you using?Last edited by The_Doman; 29th May 2024 at 13:44.
-
You can switch it to player mode or camera mode. In between these settings there is the off position.
I read the manual but there werenīt any helpful informations.
I use this capture device https://amzn.eu/d/2DCf1T3. There isnīt anything you could set up at the device directly. I tried OBS to record the material but I tried mostly every setting. -
There isnīt anything you could set up at the device directly.
[Attachment 79446 - Click to enlarge]
It sounds to me like you may not have NTSC/PAL set correctly. Try one of the PAL settings, we use PAL_B in Australia. Not sure what you Germans use.
Don't spend money on another cheapo stick until we get this one sorted out.
Similar Threads
-
digitizing color problem
By broskieeeeeeeeeeeeeee in forum Camcorders (DV/HDV/AVCHD/HD)Replies: 0Last Post: 19th Aug 2023, 02:28 -
Video8 tape shows video on the LCD screen, but not when digitizing
By SilverPT in forum CapturingReplies: 13Last Post: 16th Jan 2023, 06:52 -
Here's something interesting about original monochrome analog video spec
By Videogamer555 in forum MediaReplies: 10Last Post: 26th Oct 2022, 15:36 -
Digitizing VHS in 2021
By d75oh in forum Newbie / General discussionsReplies: 19Last Post: 28th Jun 2021, 18:02 -
10 bit monochrome - any advantages?
By chroma601 in forum Newbie / General discussionsReplies: 2Last Post: 30th Jul 2020, 08:13