View Profile
View Forum Posts
Hi there!
A friend of mine has a Betacam SP machine - it's Sony UVW-1600P. It is currently hooked up via composite output due to lack of component capture. Unfortunately output picture is like the one from the image attached. How can he fix this?
P.S S-Video has the same output
[Attachment 73495 - Click to enlarge]
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays!
+ Reply to Thread
Results 1 to 5 of 5
Thread
-
Last edited by kk20001996; 28th Aug 2023 at 11:51. Reason: Addition
-
Capturing Memories
- Jan 2016
- Member Since 2005, Re-joined in 2016
You need a proper diagnosis with some test tapes and an oscilloscope.
-
The problem is that it is not happening on all tapes as you can see on the attachment. Another addition the Betacam deck is hooked up via composite output to a Sony RDR-AT205. Could you recommend any settings that need to be adjusted on both?
BETACAM TEST.VOB -
Capturing Memories
- Jan 2016
- Member Since 2005, Re-joined in 2016
-
No, I don't know what the problem is to suggest anything, Betacam in general is better captured over component or SDI if equipped with an internal analog to digital converter.
-
Hopefully someone else who has ran into the same issue will answer...
Quote
Visit Homepage
Similar Threads
-
Betacam J3 Sony output as 16:9
By Loganp in forum Newbie / General discussionsReplies: 12Last Post: 27th Feb 2022, 11:25 -
Help with denoising old betacam digitalized video
By dogmydog in forum Video ConversionReplies: 30Last Post: 19th Nov 2021, 16:36 -
Capturing analog Betacam..Interlacing issue
By Joey Bagodonuts in forum Capturing and VCRReplies: 5Last Post: 24th Feb 2021, 12:48 -
Betacam SP Captures H.264 Encoding
By dellsam34 in forum Video ConversionReplies: 12Last Post: 8th May 2020, 21:54 -
Digital Betacam Audio out
By stoxworld in forum Newbie / General discussionsReplies: 0Last Post: 30th Jan 2020, 10:19