Does anyone have any ideas on how to make this tape normal? It has these tracks on the sides, none of my VCRs, even with TBC can let the video without oscillation.
[Attachment 69516 - Click to enlarge]
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays!
+ Reply to Thread
Results 1 to 5 of 5
Thread
-
-
Nothing can fix it, Even if you iron it the megnetic particules have been damaged and the signal cannot be recovered.
Last edited by dellsam34; 1st Mar 2023 at 03:44. Reason: typo
-
AFAIK, control track is not used if you play with slow of fast motion. Does your VCR have jog dial? You could speed it up just a bit and capture like this, then slow down in post.
-
I have a method to solve this, touching, applying pressure, together with a soft paper, on a part close to the left rolling guider, but I can only make this method work on the Philips VR788 model, hence the tape runs normally, I already did that but the problem was in a few meters of tape. In this case, the whole tape is like this, there's no way I can keep my finger there with the paper for a long time like this.
I will show how I do later.
Similar Threads
-
Ripple trail on the sides of the tape.
By Caius in forum CapturingReplies: 2Last Post: 6th Oct 2022, 06:40 -
Tape deck - head cleaning tape
By hotcheeto in forum Camcorders (DV/HDV/AVCHD/HD)Replies: 2Last Post: 1st Sep 2022, 22:00 -
VCT tape video capture: Tape shows annoying VCR Speed and Tracking bar...
By MoonView in forum CapturingReplies: 7Last Post: 5th Apr 2021, 21:52 -
fixing damaged frames (as if the video was captured from a bad tape)
By sashakhina in forum RestorationReplies: 20Last Post: 25th Jan 2020, 04:35 -
vhs tape question, 1/2 tape is fine and 1/2 way thru gets lines
By tomthetank in forum Newbie / General discussionsReplies: 8Last Post: 13th Jan 2019, 07:14