region hack for a LG DVD-3200E

[fingerinthedyke]

does anyone have a region hack for the LG DVD-3200E
?

[The_Mind_Flayer]

8)

try this but it wont work if you have firmware 1.0

Firmware Check:

1. Press Setup button on the remote control.
2. Select TV Aspect.
3. Place the cursor on 16:9 wide.
4. Using the remote control, key in the following: 1, 3, 9, 7, 1, 3, 9.
5. Press Enter on the remote control.
6. Press "SETUP" to clear the information once read.

Region change:

1. Wait until the message "no disc" or "region coding error" appears before you proceed to step 2. You only have a second or two to enter the code below.
2. Press PAUSE, ENTER, 3, 1, 4, 1, 5, 9 on the remote control.
3. Press 0 for region-free, 1 for region 1, 2 for region 2, etc.
4. Press PAUSE on the remote control.
5. Power off the player for few seconds.
6. Power on the player.


VCD Enable:

1. Power on the player with no disc in the drive.
2. Press Pause on the remote control.
3. Using the remote control, key in the following: 1, 4, 7, 2 (the characters 01 47 should appear on the display) [If your player is a non UK model, this number will probably be different - don't worry]
4. Press the UP arrow three times (the characters 04 Fd should appear on the display)
[This number may be different depending on the configuration of your specific model - don't worry]
5. Press Program, 6, Program, 5 (the characters 04 FE should now be displayed).
6. Press Enter (the display should flash briefly).
7. Press Return.
8. Power the player off and then back on.
9. Play a VCD!
Yes for 3200E, 3230, 3830P, 4000A, 4210, 4710, 4830, DA-3520

cya
Richard Standen