Here is the 14 seconds clip of Babylon 5 ep 1.
I for the life of me can't get it done.
Some people have done it but i can't find any instruction.
This guy did something but haven't a clue what. https://www.modeemi.fi/~leopold/Baby...ransfer.html#8
When the scene goes upwards there is jumping back and forth.
frame by frame u-up; ju- jump up; d-down
uuuujudud uuuujudud uuuujudud pattern. Sometimes a bit different.
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays! or rip iTunes movies!
+ Reply to Thread
Results 1 to 6 of 6
Thread
-
-
It's top-field-first and If you QTGMC() you get a mix of clear and blended frames but no backward movement. That implies a frame rate conversion. Either from an NTSC source or just as part of the production. I recommend you post a shot with a medium speed horizontal panning shot from a live action (not CGI, and not the intro sequence) portion of the show for easier analysis.
Code:Mpeg2Source("14.d2v") QTGMC()
Last edited by jagabo; 24th Sep 2021 at 08:10. Reason: added mkv
-
-
NTSC version is better. Use SelectEven() on that NTSC version and frames are basically correct. The framing of the shot is also different than your version
Your version is blended, and more conversions have been applied as jagabo pointed out. There is too much blending per frame to "undo" using normal methods. You can try some deblurring / deconvolution kernals, but most are for single image -
The following seems to do good things by getting rid of all the blends and drops. However, since it converts to 30 fps progressive, you may have to do things to rematch the audio. Remove the Separatefields() at the end to see the final, progressive video. The Separatefields() command simply lets you see if there are any blended fields left. I have uploaded short clips from both the separatedfields version as well as the version with that removed.
Here's the separatedfield version:
https://www.mediafire.com/file/1j6a0rx5wf093ss/Srestore.avi/file
And here is the progressive full-frame 30 fps version:
https://www.mediafire.com/file/h23mr03ho47j1p9/Srestore+(full+frame).avi/file
Code:loadPlugin("c:\Program Files\AviSynth 2.5\plugins\TIVTC.dll") loadplugin("C:\Program Files\AviSynth 2.5\plugins\MVTools\mvtools2.dll") loadPlugin("C:\Program Files\AviSynth 2.5\plugins\Srestore\mt_masktools-25.dll") Import("C:\Program Files\AviSynth 2.5\plugins\Srestore\srestore.avs") source=AVISource("E:\fs.avi").KillAudio().converttoYV12(interlaced=true).AssumeTFF() bob(source,-0.2,0.6) output=srestore(frate=30, omode=6) return output.separatefields()
Similar Threads
-
VLC can't bob-deinterlace video from Blu-ray properly. What's going on?
By AVR2 in forum Software PlayingReplies: 11Last Post: 26th Jul 2021, 18:17 -
Don't know how to properly deinterlace and clean SD video
By memo90061 in forum RestorationReplies: 3Last Post: 1st Jul 2020, 16:23 -
How to deinterlace video?
By ACKR in forum Video ConversionReplies: 9Last Post: 28th May 2020, 02:26 -
How to deinterlace this video ?
By marconii2002 in forum Newbie / General discussionsReplies: 1Last Post: 7th Dec 2019, 14:07 -
Need help properly identify and deinterlace this DVD
By skfunnyboy in forum Video ConversionReplies: 3Last Post: 10th May 2017, 10:49