Hi, first time poster and long time lurker here.
I just got an ES10 for transferring some buggered tapes in passthrough but I can't seem to get past the initial auto setup for channels. So annoying.
I don't yet have a proper remote as I got this used but I have ordered a replacement. In the meantime I have a universal remote that works somewhat. I think.
On most recorders that I've worked with I could select the line ins with the channel selector. Is this applicable with the ES10?
My big obstacle is that I can't select my inputs with the channel selector because I have no channels in memory. Everytime I press the channel selector on the unit it goes into channel setup. I don't have any cable service and don't need or want channels on the ES10. I've tried plugging a cheap antenna into the RF to appease the unit in but no dice. Nothing comes up.
Anyone experience this? If so, How can I work around this?
+ Reply to Thread
Results 1 to 2 of 2
I figured out a fix. I plugged a coaxial output from one of my VCR's. This seemed to have satisfied the ES10's lust for a "channel". Ha.
Any suggestions for optimal setup for transferring via passthrough?
I have video settings at Picture - Normal with Line-in DR set to off.
I'm not sure if there are other menus I can't see since I don't have the proper remote.
Panasonic DMR ES10 (UK) needs power cordBy Cherbette in forum DVD & Blu-ray RecordersReplies: 18Last Post: 25th Sep 2019, 13:56
Panasonic dmr-es10 progressive scan vhsBy tuberlildk in forum CapturingReplies: 3Last Post: 10th Sep 2019, 07:45
Panasonic DMR-ES10 - Broken?By geordie10 in forum DVD & Blu-ray RecordersReplies: 9Last Post: 9th Jul 2019, 11:49
Settings Panasonic DMR-ES10 for pass throughBy GovertdeKat in forum CapturingReplies: 4Last Post: 17th Oct 2018, 11:58
Do I have the Correct DMR-ES10 Pass through Setup Right?By TazDave in forum CapturingReplies: 7Last Post: 28th Feb 2018, 08:15