Setting-Up Panasonic ES-15

[anachronon]

I recently picked-up a Panasonic ES-15---hoping that the line TBC will clean-up the glitches in my video captures. But first, I have a couple questions:

What (if any) settings do I need on the ES-15, to take advantage of the line TBC on pass-through?

Do I need to pass the audio through the ES-15 as well (to keep it in sync)? Or, should I still run the audio directly to the capture device?

[lordsmurf]

The line TBC is always on.
Find the NR, turn if "off" (still on, just not as aggressive now)
Black level in menu may need adjusting. I forget offhand which is best setting. You don't want it too light, nor crush.

Yes, on ES15 audio has delay. So route audio into it, back out.
Not on ES10.

[jagabo]

Set Input to Lighter, Output to Darker. That gives the least banding (posterization).

https://forum.videohelp.com/threads/380285-Where-did-I-go-wrong-What-am-I-missing#post2460874

Then adjust your capture devices proc amp to the correct levels.

[phelissimo_]

Yes, on ES15 audio has delay. So route audio into it, back out.
Not on ES10.

What about the EH-52?

[anachronon]

Thanks everyone. I will keep those suggestions in mind.