VideoHelp Forum
+ Reply to Thread
Page 2 of 2
FirstFirst 1 2
Results 31 to 34 of 34
Thread
  1. Member DB83's Avatar
    Join Date
    Jul 2007
    Location
    United Kingdom
    Search Comp PM
    I assume you have a user manual for the camera but just in case......


    https://usermanual.wiki/JVC/GRD70E.1144567136/view


    There is not much info there about PC transfer. It is not clear if you also have to use the switch settings on Page 34 - Video Dubbing.


    Page 40 is the relevant one and the following caught my eye....



    The system may not work properly depending on the PC
    or capture board you are using.
    Quote Quote  
  2. I looked at the user manual for your JVC camcorder and the instructions for playing or recording video via the 1394 connector begins on page 34. It appears that the unit switches between "video in" and "video out" simply based on whether you press the play or record buttons on the camcorder. This makes sense, but it also means that because there is no menu setting, you might not be able to get the camera into either the play or record state via the 1394 (i.e., you can't change anything from the computer). Thus, you will need to press the play button on the camera and then click on the "capture" button in Scenalyzer (or other app).
    Quote Quote  
  3. Thanks DB83 and johnmeyer.
    Have tried your suggestions and get the same results.
    Looks like im heading down the path of paying someone to do the transfers for me☹
    Quote Quote  
  4. It seems that the GR-D60 can send video over USB. Have you tried it?

    The instructions on page 40 say:

    Using USB cable. It is possible to do the following things:
    • Transfer still images stored on a memory card to a PC.
    • Transfer still/moving images recorded on a tape to a PC.
    • Capture still/moving images in real-time.
    • Use this camcorder as a WebCam.
    Last edited by ConsumerDV; 14th Apr 2022 at 00:43.
    Quote Quote  



Similar Threads

Visit our sponsor! Try DVDFab and backup Blu-rays!