I have had good luck in the past with my ADVC 100 - but trying to capture some old VHS stuff - it doesn't seem to be working. I tried it on multiple machines - difference cables, different VCRs and all I get is the black screen with the red line. Bought a new TI chipset firewire card - and it did the same thing.
I am using WinDV - which is what I used to capture before without issue.
Any thoughts on what the problem could be?
+ Reply to Thread
Results 1 to 2 of 2
For future readers, this issue has to do with power. You are not using the original power adapter, or you are using a defective power adapter.
PSP 100 power adapter will work fine for 55/110, but not for the old models of the 100. Swap the power adapter with the original one, and it will work just fine.
(source: personal experience)
Canopus ADVC-100 has a TBC after allBy amaipaipai in forum CapturingReplies: 44Last Post: 22nd Jan 2022, 15:12
Canopus ADVC-100 vs. ADVC-110 vs. ADVC-300By TrackingError in forum CapturingReplies: 36Last Post: 16th Jul 2021, 11:19
Canopus ADVC 100 - IssuesBy hdfills in forum CapturingReplies: 7Last Post: 14th Jun 2020, 00:11
Canopus advc 100 on a recent LaptopBy mohamed in forum CapturingReplies: 5Last Post: 11th Feb 2020, 13:07
Canopus ADVC 100 - Noise/Grain in CaptureBy passenger in forum CapturingReplies: 10Last Post: 21st Nov 2016, 04:00