I am looking for a brave soul who would be kind enough to offer detailed instructions on how to run Deoldify on Windows. I have downloaded Anaconda and Python, but can't seem to fill in the missing pieces to get it all to work.
Although you can upload small samples to the Google Colab it is hosted on, it would be great to experiment without the restrictions of file size and uploading and downloading online.
Deoldify can be found here: https://github.com/jantic/DeOldify
And the Google Colab for video colorizing is here: https://colab.research.google.com/github/jantic/DeOldify/blob/master/VideoColorizerColab.ipynb
If there is anyone who would be willing to take a few minutes to write down and post an installation guide on how to run this in a Jupyter notebook on Windows, I think you would be helping more than just me...but also a bunch of fellow enthusiasts who love working with this stuff, but who are not programmers!
+ Reply to Thread
Results 1 to 18 of 18
says here - https://alternativeto.net/software/deoldify/?platform=windows it's not available for windows.
also see here - https://colab.research.google.com/github/jantic/DeOldify/blob/master/VideoColorizerColab.ipynb
Thanks for that link...
As I alluded to in my OP....you would need to run it in Anaconda, which I believe would be as a "shell" in Windows.
I am looking for how to go about doing that.
I was hoping someone who is familiar with the scripting in that environment could offer assistance.
cgywin and qemu. but it will not be native, those programs emulate Linux so its running on a distro inside an emulated environment. if you can spin up a vm in your win install like hyper v (win pro) you can do the same thing.
Thanks for your reply, the_man_one....but the reason I am asking for assistance is because I do not know how to do it.
I am on another forum where I am, for lack of being modest, a solid expert. I get newbie questions all the time, and I can either answer them directly or not. But if I answer the question, then I answer the question first and foremost and not offer anecdotes, opinions, political views, and weather reports. So many people on these forums redirect from the OP into discussions about what they would do themselves. I get it...it's hard to have an organic "conversation" in forums.
So I am at a major disadvantage. I understand that here. I have tried for a week or 2 to try and grasp this whole "virtual shell" thing. It's not sinking in. So....I figured I'd throw it out there for anyone that might be willing to help on this.
If someone willing to help with an instructional on how to get Deoldify to work in Windows via Anaconda (or whatever) - then that's great. And I think that person will wind up helping a lot of people who want to experiment with this program without having to rely on the Colab. If not....I understand that too, which is unfortunate...but it is what it is.
Thanks to all of you who help the newbies. We all start out as them at some point. I try to always remember that. Enjoy & Peace
if you're willing to think sideways for a minute, why not install linux and dual boot? plenty of tutorials online.--
"a lot of people are better dead" - prisoner KSC2-303
ok if you have win 10 pro look up hyper v and do a read on it. too much to try to explain. basically you pull it up and install a Linux distro on it (this is an over simplified explanation. vm ware is another possibility. alternatively you could run a Linux hypervisor such as robo Linux or proxmox or kvm or xen or unraid or many others but if you did that just run a Linux distro and install it on there. there is no "easy" way to get it on windows. you could run something like codijy or black magic or akvis colorage natively in windows. those do photo things altho im not sure if they are what you need
what is going to happen is first establish which windows you have. if its win 10 pro then you have hyper v already there (or you can get it). the next thing is to determine if your processor will handle running it. then set up your "environment" which is called a virtual machine it literally is a fake computer you built inside of your os with virtual hardware. from this point to build it you have to allocate ram and core/s to your machine to get it to run and a hdd or portion of a hdd. then install the os on that drive.
I hope this is what you want. now if your windows does not have hyper v on it you have to go to an external app to do this (at this point you have to decide which you want) then do the same things I just said.
I tried to make it as layman as I could. reading on VM's and which "VM maker" (shell) you choose will help a lot. ill say this, the better processor you have the better this will do, the more ram you have same thing, and the bigger hdd or hdd's the better. im thinking minimum ram is 4 gig but 8 is recommended and I would not try it unless I had at least 16. the reason being you will have to run 2 pc's on your pc. a dual boot or even enterprise class hardware (along with the OS to back it up) is your friend in this situation. for instance I have multiple servers running 96 ram on 1 with 16 cores. I have another server with 64 cores and almost 1 tb ram. they run multiple flavors of Linux at the same time and multiple windows environments also. sorry im not concise with my explanation but there is a lot to learn and you have not told me much to go on
Last edited by the_man_one; 15th May 2020 at 22:54.
as a start you can look up home lab setups, networking, and hypervisors when you can understand those then maybe you will get a better understanding of what you want. believe me I know exactly where you are. if you want to do this do not give up its well worth the "play time" you get, at least it is for me.
Anaconda is a free and open-source distribution of the Python and R programming languages for scientific computing. it is not what you are referring to as a "shell" its a programming language for making apps I assume. I know nothing about coding or scripting. that's not what you want to do unless you are planning on taking raw code and make your own custom program to communicate between windows and Linux.
Thank you for all your pointers, "the_one_man!" I will take a good deal of Saturday looking into it!
I am running an i9-9000 Intel with 64 GB RAM and an NVIDIA GTX 2060. Hopefully enough horsepower.
Thank you again...I will report back!
yes you have the horsepower for it. its a different kind of horsepower but it will work. enterprise class things are for working, sustained usage and such. your horsepower is akin to getting a '70 car dropping a big engine in it and not quite building it fully, ie: you left out the porting on the heads, over-bored the cylinder walls, and left the stock headers on, in other words it will run like a scalded dog but its going to run hot.
forgot 1, docker, look it up. it is quite possibly the easiest way using windows only, you do however need a minimum Linux kernel.
I will look into it....
The creator of DeOldify suggests I run a dual boot of Windows and Ubuntu...he says my greates chance of success is to simply run it in Ubuntu...problem is, my system is UEFI and I am not sure I can arrange for a dual OS boot with that.
if your pc is within 3 to 4 years old its uefi. ubuntu will work fine and grub as the boot loader. pretty much any pc that came after win 8 and after is uefi.
I would love to see your procedure on how to do this!