Cant mux to mp4
Got an AVI I have encoded and need it as an .mp4
Tried with the latest version of cleverFFmpeg on Windows10 but it just outputs a zero file size mp4. I tested outputting to mkv and that works fine.
Anyone know whats wrong please as I have all 3 FFmpeg components in the same folder.
+ Reply to Thread
Results 151 to 180 of 218
Format : AVI
Format/Info : Audio Video Interleave
File size : 693 MiB
Duration : 9 min 9 s
Overall bit rate : 10.6 Mb/s
Writing application : VirtualDubMod 126.96.36.199 (build 2540/release)
Writing library : VirtualDubMod build 2540/release
ID : 0
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High 4:4:4 Predictive@L4.1
Format settings : CABAC / 3 Ref Frames
Format settings, CABAC : Yes
Format settings, Reference : 3 frames
Codec ID : h264
Duration : 9 min 9 s
Bit rate : 9 000 kb/s
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 30.000 FPS
Color space : RGB
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.145
Stream size : 592 MiB (85%)
Writing library : x264 core 152 r2851bm ba24899
Encoding settings : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x1:0x111 / me=hex / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=0 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=2 / lookahead_threads=2 / sliced_threads=1 / slices=2 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=0 / weightp=2 / keyint=250 / keyint_min=25 / scenecut=40 / intra_refresh=0 / rc=abr / mbtree=0 / bitrate=9000 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / ip_ratio=1.40 / aq=1:1.00
Color range : Full
Matrix coefficients : Identity
ID : 1
Format : PCM
Format settings : Little / Signed
Codec ID : 1
Duration : 9 min 9 s
Bit rate mode : Constant
Bit rate : 1 536 kb/s
Channel(s) : 2 channels
Sampling rate : 48.0 kHz
Bit depth : 16 bits
Stream size : 101 MiB (15%)
Alignment : Aligned on interleaves
Interleave, duration : 33 ms (1.00 video frame)
Interleave, preload duratio : 500 ms
Try with the newest beta
Load your avi, click on main, click multiplex, videotrack and audiotrack are already selected, click on target file, accept the proposed name, set mp4 as container, click multiplex. Done.
Last edited by ProWo; 3rd Feb 2021 at 10:36.
Could be. Convert to aac and try again.
Thanks for the reply. Yeah, the original video muxed in your great program but with AAC audio does work and outputs an mp4.
My problem is that extracting the audio and converting from PCM to AAC in audacity and then using that to mux is yet another step and I'm trying to minmize the workflow.
I'm editing in Premiere PRO CS3 and using debugmode frameserver to serve the video to virtualdubmod and then Clever to mux into MP4.
The problem is that the frameserver only serves PCM from premiere pro CS3.
If anyone has any idea of a better workflow I'd appreciate it please.
Load your avi with pcm audio in clever Ffmpeg-GUI, click on Audio conversion, continue, set aac as output, click on convert. After this click on multiplex, your new created aac is already selected, click on video track, accept your avi, click on target file, accept the proposed name, set mp4 as container, click multiplex. Done!
Much thanks ProWo. I'll certainly use that workflow. Thanks for the great app and all your help
February 08, 2021 update to version 2.7.2.
Fixed: Small bugs.
Added: VP8 encoding, multiplex to webm.
Added: Video merge (concat demuxer).
Added: Support for Avisynth. A basic Avisynth script is created that you can customize, modify, test and then encode with the desired encoder.
Removed: Inverse Telecine (IVTC), QTGMC deinterlacing. You can use your own scripts now.
Improved: Many fine tunings.
Ti chiedevo se era possibile convertendo in VOB visualizzare quale dimensione avrebbe il file convertito, affinchè si possa regolare il bitrate fino a
raggiungere 4.38 giga massima dimensione per fare un DVD. Per avere maggiore qualità video. Stessa cosa con M2TS per i Blu-Ray.
TrueHD 7.1 to eac3 (5.1) conversion and 5.1 (6ch) and 7.1(8ch) to single wav's (pcm) conversion implemented in latest beta version (v2.7.3_05_Beta).
Try it and report here.
I am very happy to use your super clever FFmpeg-GUI , but it will be more powerful if i can use my own settings to adjust some of the basic ones . Cause i want to take full advantage of my hevc_qsv video processor like i do it using this commands directly to ffmpeg and the results are way better and with a speed of 4 to 6 using 90 % of my GPU and only 40 to 60 % of mu CPU
-map 0 -c:v hevc_qsv -preset:v 1 -profile:v 0 -load_plugin hevc_hw -pix_fmt nv12 -global_quality 18 -b_strategy 1 -compression_level 7 -qcomp 0.80 -rdo 1 -g:v 250 -bf:v 3 -refs:v 5 -bitrate_limit 1 -vf "scale=1920:1080:flags=lanczos,format=nv12,yadif=2 " -aspect 1.7777 -color_primaries bt709 -color_trc bt709 -colorspace bt709 -c:a aac -b:a 128k -ac 2 -ar 48000
hope it will be possible to use our personal script in your guide in the future ...
My program is intentionally kept simple and designed for normal users so they don't lose track and (very likely) make mistakes and make wrong entries. This should also remain so. For this reason I will not implement any change to the command lines.
i respect what you made with this GUI , it was just a suggestion , or maybe if it is possible to add the support for hevc_qsv as selected video preset or the possibility to use hardware acceleration where it is possible !!!
Hello, I was attempting to try to use this program to try to (easy as possible w FFMPEG) convert PAL to NTSC DVDs.
I have this program in its own folder and downloaded the correct 4.3.2 FFMPEG (Windows 64) files.
Everything goes fine upon starting, locating the FFMPEG folder, then I select a VTS VOB file to open, the program asks me if I would like to open the entire movie I select 'yes' again all seems fine until I try to 'Rip' the movie - at that point I get an 'Unhandled Exception' error. If you click continue nothing happens so it must be closed. I read through this thread where it is suggested to try to use the Beta build if this error show so I did but I get the same error.
Is this a vts_99_9.vob file on a DVD (where 9 stands for numbers, g.e. vts_01_1.vob) or a single file on your harddisk? In this second case you must respond No.
Last edited by ProWo; 25th Feb 2021 at 18:14.
Thank you for the reply, yes this is a VTS__.VOB files.
Specifically I tried 2 PAL unprotected DVDs that are on hard disk; I opened 'VTS_01_0' it is related to 'VTS_01_1,2,3 & 4' as the complete main movie - As I believed this to be ok I got the message if I would like to open the main movie for it and I believe I read that this is how to import a DVD for CleverFFMPEG here on VideoHelp.
I could join all the .VOB from main movie into 1 file and\or 1 .mpg file if that is what is needed instead?
Ok, some more testing for the above post. Originally I had placed the downloaded 4.3.2 FFMPEG files into the parent directory of 'cleverFFMPEG' and selected that as the source directory but for me anyway once I placed all those files inside the 'x64folder' it is all working ok now - I also used a 'joined.vob' just to be sure.
Just for your info: the movie starts with vts_01_1.vob, not with vts_01_0.
I suggest to use a CCleaner before opening CleverFFmpeg, adding una tantum a new Include statement:
Click the Options icon at left > Include button > Add > File >
C:\Users\[User_Name]\AppData\Local\clever_FFmpeg_GUI\clever_FFmpeg_GUI .exe_Url_fokpm05yenrhb5scwzlvslghqdh03okg\188.8.131.52\ user.config
Last edited by parvares; 27th Feb 2021 at 14:39.
March 01, 2021 update to version 2.7.3.
Fixed: Small bugs.
Added: Multiplex to mov.
Added: Profile selection (x264 and x265).
Improved: Duration detection, Multiplex logic, many fine tunings.
I have a problem ripping a DVD, I point to VIDEO_TS, VTS_01_0 and VTS_01_1, none seem to work, I get an empty 0,00 kb rip file.