My camcorder won't power on, according to one of the 12voltvids videos, the fuse is blown. https://youtu.be/C5DNd54ksgE
The service manual shows 6 fuses, are they the ones circled in red? They don't make a beep sound when I test them for continuity on the multimeter. They give me a value of 0.65V instead
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays! or rip iTunes movies!
+ Reply to Thread
Results 1 to 6 of 6
Thread
-
Last edited by digicube; 10th Mar 2020 at 17:13.
-
More of resistors, could be diodes.
-
Most likely those are resistors and measuring 0.65V across them means nothing.
All the fuses are on the DD105 board, shown at the top of the schematic on page 4-122.
* WITH THE POWER OFF AND BATTERY REMOVED * a fuse should be checked on the resistance (Ohms) range and for their 1.4A rating should measure less than 1 Ohm. Note that using the continuity range or worse still a dedicated continuity tester can permanently damage the surrounding circuity.
Brian. -
Bummer I can't find a 3mm 1.4A smd fuse on digikey or mouser. I guess I have to use a smaller one with wires? https://www.digikey.com/product-detail/en/ERB-RE1R40V/P121392CT-ND/6564397/?itemSeq=320431505
going to 1.5A gives a lot more options. https://www.digikey.com/products/en/circuit-protection/fuses/139?k=&pkeyword=&sv=0&pv1...=1&pageSize=25Last edited by digicube; 11th Mar 2020 at 13:40.
-
You should be fine to use 1.5A, fuse ratings are not very precise in manufacture and in any case have a time element to how long it takes to operate under different overload conditions. They don't live forever at 1.4A and pop instantly at 1.41A !
Unfortunately, PS803 is the main fuse to the 3.3V supply line regulator so it feeds many parts of the camera. If a new fuse pops it could be difficult to isolate the fault.
Brian.
Similar Threads
-
Playback problems - sony ccd-trv14
By johnfin in forum Camcorders (DV/HDV/AVCHD/HD)Replies: 4Last Post: 29th May 2019, 04:59 -
CCD-TRV65 vertical jitter when TBC is turned off and pixelation in capture
By digicube in forum Camcorders (DV/HDV/AVCHD/HD)Replies: 4Last Post: 9th Jun 2017, 09:01 -
Help converting 8mm videos from Sony ccd-trv238e camcorder
By champson in forum Video ConversionReplies: 9Last Post: 1st Nov 2016, 13:00 -
Capturing PAL Video8 Footage (CCD-TR620E)
By roflwaffle in forum CapturingReplies: 2Last Post: 30th Mar 2016, 07:50 -
Problem With Sony CCD M8u Playback
By ophirkutiel in forum Camcorders (DV/HDV/AVCHD/HD)Replies: 2Last Post: 5th Aug 2015, 07:06