The title explains the problem. There are other posts about this. The codes that seem to help other regions never display the current region my system is set to. Therefore, I canít get to the next step of choosing 9 for region-less. I am able to play dvds with no region code, but not ones with region code of 1. It also ejects blank dvds and says it canít play them. Are there other codes for US machines?Please help. Thanks.
+ Reply to Thread
Results 1 to 14 of 14
did you try doing a factory reset on the player ??
I did not. I found this website that I will try for that. https://smallbusiness.chron.com/reset-samsung-dvd-recorder-53396.html
Thank you so much.
Last edited by Mb2019; 14th Dec 2019 at 20:45. Reason: Found instructions online for factory reset. I will try.
At step 4 , the instructions in the link above fail, because there is no ďfactory settings ď option. I am going to look for another way. Please let me know if you come across one
Why does the US player not play region 1 DVD's? What's the history?
Last edited by davexnet; 14th Dec 2019 at 22:29.
I tried the factory reset per the owners manual (hold down both channel buttons, wait 5 seconds, press power button.)
Here is what happens:
The following screen comes up and the the disc tray opens after holding the channel buttons for five seconds.
[Attachment 51096 - Click to enlarge]
Then I hit the power button and nothing happens. Then I hit the power button again and it turns the system off. I have tried different variations such as holding the power button. None of this ends up allowing you to
A) change region in menu screen per other thread on this site
B) insert a blank disc and have it do anything besides say load for a while, followed by ejecting it and saying it could not play the disc.(tried with verbatim -r, and tdk +R.)
C) load certain discs that are region 1
I have three dvds that it will play. Two donít list the region number or much else. One I just tried that works actually does show a region code of 1. That dvd also says ďDVD 5Ē and ď16 : 9 Screen FormatĒ in two little rectangles.
The dvds that wonít play are region 1, and say widescreen.
I have used this machine to record a dvd from a vhs in the past. However, I donít remember if I used a different brand or type of blank DVD. Thanks in advance for any more advice, as I am still stuck. I can supply more details or photos.
unplug the unit and leave it sit for awhile then
try plugging it back up and see what that does.
I have unplugged it after failing for the past three days and let it be unplugged overnight each time. It was unplugged last night as well so I will try again.
Maybe I miss something here.
But a Region 1 dvd player out-of-the-box should play Region 1 dvds.
A Region 1 dvd player out-of-the-box should not be expected to play dvds of any other region unless those dvds are encoded 'Region-free' or Region 1.2,3,4,5,6'
If same dvd player out-of-the-box can not play Region 1 dvds then it is not fit for purpose and should be returned.
Yet if that same dvd player has had some attempt to make it 'region-free' then one accepts that you have done something, which may not always work since few players have no updates to prevent such a situation, to 'kill' it
I bought it used. It did work once for copying from vhs to dvd. It does not anymore though, and I noticed it also doesnít play certain dvds that are labeled region 1. It does play one that is labeled region 1 though.
I canít return it. Are you saying you think there is a way to do an update?
Accept it is fubar. Move on and get another unit.
I had a unit once that would only work if there was a cassette in the VHS slot. Take it out and the DVD would not work at all. Something with the electronics went bad.
I was hoping someone would be able to confirm if I did the factory reset correctly. Also, I will try a different type of blank dvd or search for the one I succeeded with, before giving up.
Yes I did try that hack. If you look at the EU version of that thread, it has the same instructions, and you will also see other people saying it wasnít working for them on the US machine. I never get a number to appear after typing any of the region passcodes.