I want to add a new audio item to the main movie of a chapter series, the problem I have identified is when it's time to replace the main movie pgc in vobblanker, because when I open the DVD in vobblanker this message pops up "this is quite usual in ILV/multiangle VTSs, but vobBlanker does not support them, except in skip mode" >>>> https://forum.videohelp.com/images/imgfiles/NK6hbko.jpg
from what I've read has to do with multiangle or something
Wrong DVD after pgc replaced main movie, in pgcedit
And when I'm going to activate the new items in pgcedit after replacing the main movie pgc in vobblanker the structure got a mess, instead of having the chapters each 20 minutes, some joined together were split in 1 hour, the other 40 minutes ....
And when I play the dvd, when I hit a chapter it doesn't go to the movie, it gets locked in the menu screen .....
Before replacing normal >>>> https://forum.videohelp.com/images/imgfiles/Plyifnl.jpg
After replacing with vobblanker got a dick >>>> https://forum.videohelp.com/images/imgfiles/Q8Fuvvs.jpg
And when I open the dvd in pgcedit without replacing vobblanker these messages appear
https://forum.videohelp.com/images/imgfiles/xW6OgtC.jpg
https://forum.videohelp.com/images/imgfiles/qg0rFcQ.jpg
https://forum.videohelp.com/images/imgfiles/tdZB7L6.jpg
https://forum.videohelp.com/images/imgfiles/Pg77YQY.jpg
https://forum.videohelp.com/images/imgfiles/MOWNq4c.jpg
https://forum.videohelp.com/images/imgfiles/UN4YaCs.jpg
What can I do to replace the main movie pgc in vobblanker and then the dvd doesn't get unstructured ????????????
have to take this multiangle, how does it step by step ?????????
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays! or rip iTunes movies!
+ Reply to Thread
Results 1 to 9 of 9
Thread
-
-
-
Last edited by escarlate; 9th Aug 2019 at 01:39.
-
You're the one that mentioned, "this is quite usual in ILV/multiangle VTSs" from VobBlanker.
There are a number of reasons why you might have ILV/multiangles in a DVD. For example, one reason might be if the theatrical release and director's cut are on the same DVD. The director's or extended cut might have extra scenes not seen in the theatrical version.
Or, signs might be in different languages, depending on the version you choose. So, there will 4 or 5 different sets of signs (different angles), depending on if English, German, French, Italian, etc versions are chosen. Lots more reasons.
The upshot is you won't be adding any extra audio unless you get only a single angle and add it to that. But once you do that, the menus will no longer work properly unless you know how to fix them which can be difficult if you've never done it before. That's why I suggested making a new menu. Of course, you don't really need a menu at all. Just stick your new-and-improved version in the DVD player and it'll start playing automatically. If there's more than one audio, you can choose the one you want with the remote control.
How to remove angles? Do you have the whole DVD on the hard drive already? Then open the IFO for the movie in PGCDemux and if there are multiple angles, choose one, demux the audio, video, subs, celltimes.txt. Then reauthor them together with your new audio using Muxman.
Adding audio isn't just a question of adding audio. There has to be space. DVDs are limited as to the maximum bitrates. Adding audio without removing one might put you over the limit. -
I never had this problem, and if it is appearing in this, I will try to solve...... the dvd I'm talking about has no extras, no two director's version, it's just a seemingly simple dvd of a 7 chapter show
instead of muxman i use ifoedit for reauthor, i take the files where it contains the normal movie pgc in pgcdemux, but i still have problem when it comes to vobblanker, and i don't even want to create new menuLast edited by escarlate; 9th Aug 2019 at 19:37.
-
First, should the vobblanker process be done even with the "errors" before doing this step in pgcedit?
1.2 - most important question now, afterwards, do i open in pgcedit to replace the original dvd without the new iten, or the dvd author with the new iten in the main movie pgc????
2 - my main movie containing the new iten is vts_3 should i open vts_ifo_3 of the same vts to replace?
3 - considering what I already know answers 1.2 and 2...... could not do it but tried and these messages appeared:
https://forum.videohelp.com/images/imgfiles/RnRjpTf.jpg >>> what to select here?
https://forum.videohelp.com/images/imgfiles/VMxkg1p.jpg >>> and here?
https://forum.videohelp.com/images/imgfiles/sDJOwnL.jpg >>> and here?Last edited by escarlate; 10th Aug 2019 at 05:00.
-
I just checked the pictures from the first post and the PGCEdit method only works when there's only a single title in the VTS. Again, you'll have to get rid of all the other angles if you want to use the original DVD menus. And then you'll have to 'fix' the menus. Either keep the DVD you have now with the new audio or create new menus for it. You can even extract and use the menu backgrounds you have now. I apologize for not looking at those pictures earlier.
What you're trying to do is difficult even for experienced people. You could try and contact the author of PGCEdit. He comes here sometimes but your best bet is the PGCEdit thread at Doom9:
https://forum.doom9.org/showthread.php?t=153543
Similar Threads
-
How i can encode audio of "REMUX" to "BluRay.720p.DTS" wit handbrake?
By VideoHelp4Ever in forum Blu-ray RippingReplies: 1Last Post: 2nd Jul 2015, 12:41 -
[SOLVED] "--ipratio" "--pbratio"+"--scenecut" "--minkeyint" / "--keyint
By Kdmeizk in forum Video ConversionReplies: 14Last Post: 21st Jun 2015, 08:21 -
Can Someone Recommend a Blu-Ray Player that can read "BD-R" & "DVD-R" ?
By THEBDC in forum DVD & Blu-ray PlayersReplies: 6Last Post: 17th Mar 2015, 18:03 -
[Help] Problems with the "Title Button" in the "VTS ROOT" and "VTS Normal"
By kirous in forum Authoring (DVD)Replies: 8Last Post: 1st Nov 2014, 13:31 -
How to convert "Still Image" to "AVC file" (like as Godzilla Blu ray Menu)
By ningnong132 in forum Video ConversionReplies: 2Last Post: 8th Sep 2014, 05:23