As we know, Microsoft pulled the HEVC codec from Windows 10 1709 and later.
I do not have access to the store, and will never use it. M$ now charges for the codec too, but there is also a free version. Again, only from the M$ Store,
Is there a way to add HEVC support back to Windows 10 / Download the codec?
+ Reply to Thread
Results 1 to 22 of 22
I'm new here. Please be nice
I'm new here. Please be nice
As far as I can tell, one can't add native HEVC support in Windows 10 without obtaining the decoder from the Microsoft Store. It was the same situation with respect to MPEG-2 when I started using a Windows 8.1 laptop. However, only Microsoft's own apps, such as the "Movies and TV" app, seem to require Microsoft's decoders.
The third-party video player apps that I have installed which allow playing HEVC video have built-in support for GPU assisted HEVC decoding. I happen to have an Intel processor with an iGPU which is capable of decoding HEVC, but newer NVIDIA and AMD video cards would also work.Ignore list: hello_hello, tried, TechLord
I guess no one remembers when M$ did not have support for MKV or AVC or H264 (or Whatever you want to call it), built into the OS. What happened when you looked at a folder full of MKVs then? And after they added [whatever] support for MKV? How did it look then?
If the answer is "You cannot have [whatever] support for HEVC unless you download it from the M$ store - It is not available anywhere else on the planet" then that is the answer.
My question was "where can I download the MICROSOFT package (I don't believe I asked for a third party package)", not "can you please point out how much of an ignorant noob I am".
Last edited by Yanta; 18th Jul 2019 at 21:16.I'm new here. Please be nice
The legit MS codecs are ONLY Ms Store apps, so they are only available from the MS Store, and unless I am very much mistaken, redirection/proxy addresses are NOT allowed when installing those kinds of apps. That is designed that way on purpose, so that they can monetize yes, but also so that they can curate and hold makers to a high standard of quality (of coding) and security. And prevent spoofing/mal-redirection.
If you don't have access to Ms Store (weird, why?), I'm afraid you are out of luck trying to go down this road.
And contrary to what you might think, there is nothing wrong with using 3rd part codecs, particularly the opensource variety or the legit licensed variety.
As to why I will never allow store on any PC here - the same reason I disable telemetry and remove all M$ bloatware from the image before Windows is installed. Since all Windows are always installed from a clean image, I lost the codec when I upgraded from 1703 to 1809. Refer the link in my previous post.I'm new here. Please be nice
The answer to this question is at the link below. The HEVC Extension can be downloaded and installed manually using DISM, putting back what M$ took out from 1709 onwards..
https://forums.mydigitallife.net/threads/msmg-toolkit.50572/page-586#post-1540559I'm new here. Please be nice
Ignore list: hello_hello, tried, TechLord
I've been a member there since before you had to join to see answers so I was unaware. Here is the content...
Open the URL : https://store.rg-adguard.net/
- Change URL (link) to PackageFamilyName
- Inside Sample Data textbox, Enter Microsoft.HEVCVideoExtension_8wekyb3d8bbwe as Package Family Name
- Choose RP (Release Preview)
- Click on Ok
- The list of Apps available will be displayed, download the required .appx or .appxbundle file.
- Get the Microsoft.HEVCImageExtension_8wekyb3d8bbwe.x64.xml and Microsoft.HEVCImageExtension_8wekyb3d8bbwe.x86.xml from https://mega.nz/#F!R1ZSAQYD!LmAxR_bGwETWPlnl_CiMmw
- Install the App manually using the below command
DISM.exe /Online /Add-ProvisionedAppxPackage /PackagePath:Microsoft.HEVCVideoExtension_1.0.21821.0_x86__8wekyb3d8bbwe.Appx /DependencyPackagePath:Microsoft.VCLibs.140.00_14.0.27323.0_x86__8wekyb3d8bbwe.Appx /LicensePath:Microsoft.HEVCImageExtension_8wekyb3d8bbwe.x86.xml DISM.exe /Online /Add-ProvisionedAppxPackage /PackagePath:Microsoft.HEVCVideoExtension_1.0.21821.0_x64__8wekyb3d8bbwe.Appx /DependencyPackagePath:Microsoft.VCLibs.140.00_14.0.27323.0_x64__8wekyb3d8bbwe.Appx /LicensePath:Microsoft.HEVCImageExtension_8wekyb3d8bbwe.x64.xml
Credit goes to MSMG at MDL and the vast array of helpers there. And joining the MDL forums is no different to these forums. A wealth of useful tools and information.I'm new here. Please be nice
@Yanta Thanks for posting the information.
Since I already had access to the MS Store, I ran the free app that enables HEVC hardware acceleration for HEVC playback using the Movies & TV app but it is still interesting to see the work-around. However, indulging my curiosity isn't sufficient reason for me to join a new forum.Ignore list: hello_hello, tried, TechLord
@usually_quiet - Each to their own. I find MDL quite informative on many subjects, including some crossovers with topics here.
I am an avid supporter of Windows 7 but acknowledged the pointlessness of trying to stay with that OS, but I was not going to run Windows 10 in it's native state, it was (and still is), bug and telemetry ridden and full of bloatware. So the MSMG toolkit there was a godsend - which is what led me to this solution.
I'm a happy camper now. I have HEVC support on all 10 PCs now. Windows Explorer now recognizes HEVC encoded files.I'm new here. Please be nice
Unfortunately this is not working anymore, when you put in this name it returns only an empty list, and download that file at mega is offline.
Is there a another way to install that?
Appreciate any help you can provide.
Thank you so much.
check pmI'm new here. Please be nice
I would like to add HEVC to our deployment image. My first step is to successfully add it to my test computer.
I am running Windows 10 Pro and downloaded the latest version of the HEVC .appx file Microsoft.HEVCVideoExtension_1.0.23254.0_x64__8wek yb3d8bbwe.appx. I then updated the DISM command here:
DISM.exe /Online /Add-ProvisionedAppxPackage /PackagePath:Microsoft.HEVCVideoExtension_1.0.23254.0_x64__8wekyb3d8bbwe.Appx /DependencyPackagePath:Microsoft.VCLibs.140.00_14.0 .27323.0_x64__8wekyb3d8bbwe.Appx /LicensePath:Microsoft.HEVCImageExtension_8wekyb3d8 bbwe.x64.xml
I am using the DISM tool 10.0.17763.771 with image version 10.0.17763.864.
When I run the command I get the Error: 2 unspecified error. Any suggestions? I've attached the DISM log file already.
Do you have this file in the same folder as the HEVC appx and xml file?
Otherwise, include the path to the file on /DependencyPackagePath
2020-02-12 08:50:09, Error DISM DISM Appx Provider: PID=20064 TID=7668 Failed to open 'Microsoft.VCLibs.140.00_14.0.27323.0_x64__8wekyb3d8bbwe.Appx'. - CPackageAdapter::CreateFromPath(hr:0x80070002)I'm new here. Please be nice
I sent you an PM, I accidently mistyped my email, so hopefully you might send me the files to the right one.
Thanks again for your kind help.
lol. OK.I'm new here. Please be nice