VideoHelp Forum

Our website is made possible by displaying online advertisements to our visitors. Consider supporting us by disable your adblocker or Try ConvertXtoDVD and convert all your movies to DVD. Free trial ! :)
+ Reply to Thread
Results 1 to 8 of 8
Thread
  1. Hello all, new to the forum and looking for help. Not sure if I'm posting on the right forum, if not, I apologize.

    I need help identifying the connector on the Sony UBP-X700 motherboard.
    I would like to find out the name/type of connector it is. I'm trying to modify the player and soldering would be my last option, reason why I would like to get it.
    This is a 6 pin male connector, I'm looking for the female connector.

    Any help will be much appreciated.

    Thank you all in advance.

    Image
    [Attachment 47903 - Click to enlarge]


    Image
    [Attachment 47904 - Click to enlarge]
    Last edited by tmelo67; 26th Jan 2019 at 10:27.
    Quote Quote  
  2. Member misterbill's Avatar
    Join Date
    May 2007
    Location
    South Florida
    Search Comp PM
    google MOLEX 6 pin connector. Several component supply houses show similar parts. Then just pick the matching male plug.
    Quote Quote  
  3. Thank you, misterbill.

    I did Google it as you suggested but unfortunately nothing that comes up matches this particular connector.
    I even tried typing CN701 but that didn't help either.

    Thanks again.
    Quote Quote  
  4. aBigMeanie aedipuss's Avatar
    Join Date
    Oct 2005
    Location
    666th portal
    Search Comp PM
    you need to take it to a component distributor and see if they can match it. i'd guess it's a molex connector also they makes thousands of different part numbers so picking one from a picture is impossible. but this is similar but mounts differently.

    Image
    [Attachment 47911 - Click to enlarge]
    --
    "a lot of people are better dead" - prisoner KSC2-303
    Quote Quote  
  5. Thanks, aedipuss.

    It's being hard finding the female connector, although the picture you posted look very similar to one on the board.
    Quote Quote  
  6. aBigMeanie aedipuss's Avatar
    Join Date
    Oct 2005
    Location
    666th portal
    Search Comp PM
    you can get just the pins or an assortment of pins and connectors like this https://www.amazon.com/QLOUNI-Housing-Connector-Adaptor-Assortment/dp/B0774NMT1S/ref=s...lex+connectors

    if the connectors don't work you can just use the pins on the wires without a male plastic holder
    Last edited by aedipuss; 26th Jan 2019 at 20:22.
    --
    "a lot of people are better dead" - prisoner KSC2-303
    Quote Quote  
  7. Thanks again, aedipuss.

    That is a good suggestion about the pins. I'll take that into consideration after a little more search and if I don't find the correct connector.
    Quote Quote  
  8. This connector is for diagnosis of the Player.
    The pins I know are:
    1 -> ??
    2 -> GND
    3 -> Rx
    4 -> Tx
    5 -> 3.3v
    6 -> ??

    You can use a usb-ttl cable to connect the player to your PC. MTKtools app.
    But I tried to read part of the nand and it is not possible. With other players, no problem for read.
    I also don't have a decrypted sony firmware to be able to do an update via usb-ttl.
    Nor have I got telnet, because AutoScript doesn't work and the trick of the libSegFault.so module doesn't work because it doesn't have a browser.
    If someone has more information would be appreciated.
    Quote Quote  



Similar Threads