Hello again. I've been here previously with almost the same topic, but this time I think I can explain it better.
So, just with a comparison may explain it all.
[Attachment 47086 - Click to enlarge]
Video of his filter (blocked in the USA): https://youtu.be/sw8uC1xxcEw?t=51
Using Avisynth, my result is:
[Attachment 47087 - Click to enlarge]
What am I having trouble with is that the lines aren't as dark and as sharp as his, and mine look a bit transparent. I would like to know if anyone could help me with making something the same as his.
My code is:
ffmpegsource2("E:\Torrents\Sailor Moon R\(Hi10)_Sailor_Moon_R_-_55_(DVD_480p)_(SMC).mkv")
BilinearResize(1440,1080) #The original source is 640x480
ConvertToYV12()
aWarpSharp(blurlevel=4,depth=15)
SuperToon(power=1,mode=0)
linedarken_toon(sstrength=255, sdboost=0, warpdepth=10)
hysteria(4)
LSFmod(700,3,4,19)
Cut of their raw included in attachments (original file is MKV, but I cutted it on VirtualDub2 and saved as H.264, the usual I do)
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays! or rip iTunes movies!
+ Reply to Thread
Results 1 to 18 of 18
Thread
-
-
Don't want your reencoded video. Provide the un-reencoded source. Upscale at the end, not the beginning. Use nnedi3_rpow2() to upscale.
-
Hey also, how about remove the noise of it? I have recently got higher quality RAWs but they're a bit noisy.
[Attachment 47154 - Click to enlarge] -
Last edited by LMotlow; 15th Nov 2018 at 03:28.
- My sister Ann's brother -
So you don't have the original DVD MPEG2?
I trimmed a section out of the video you sent me and got the attached trim.mkv. I think you way overdid the noise reduction and levels/saturation boost. All the texture was gone and colors were way outside the valid RGB range. I would do something like this:
Code:LWLibavVideoSource("Trim.mkv", format="YUY2") ColorMatrix(mode="rec.601->rec.709") # HD colors ConvertToYV12() ColorYUV(gain_y=70, off_y=-7, cont_u=130, cont_v=130) # about as far as you can go without creating illegal colors Stab(mirror=15) # reduce the film bounce TemporalDegrain(SAD1=100, SAD2=75, sigma=4) # mild noise reduction, leave texture of the original cell animation MergeChroma(last, aWarpSharp2(depth=10)) # sharpen colors a bit dehalo_alpha(rx=2.0, ry=2.0) # reduce analog oversharpening halos Sharpen(0.0, 0.3) # sharpen vertically a bit to darken some horizontal lines FastLineDarkenMod(threshold=8, strength=80, thinning=0) # darken outlines, higher strength leads to artifacts #upscale with sharpening in two steps: nnedi3_rpow2(2, cshift="Spline36Resize", fwidth=960, fheight=720) aWarpSharp2(depth=3) Sharpen(0.3) FastLineDarkenMod(strength=30, thinning=0) nnedi3_rpow2(2, cshift="Spline36Resize", fwidth=1440, fheight=1080) aWarpSharp2(depth=5) Sharpen(0.3) FastLineDarkenMod(strength=30, thinning=0)
-
Apparently this dude is clueless about public forums ans just wants private attention and coddling via personal mail.
Why bother to sign up and post questions, dude? Is that the way they raised you in Narnia?
Jeez.
[/QUOTE]
Isn't it illegal to post full anime in public? If you didn't know, I'll let you know. -
-
Get fftw3.dll and put it in your Windows System or SysWOW64 folder.
http://www.avisynth.nl/users/warpenterprises/files/fftw3_20040130.zip -
Originally Posted by BeyondThe Energy
-
"Sarcastic"
You probably didn't know that encode was just a cutted source, and the only un-reencoded source sample I had was the full episode. I obviously wouldn't risk my own account on VideoHelp because of copyright, so I was more careful and sent it as a PM instead of sending full stuff across a legal forum. If you have a problem and came to my thread just to state the fact that I am ignorant about it, then I suggest you go somewhere else and chill out. Also Thank you in advance. -
Give up, fellas. This guy still doesn't get it. Maybe he gets it only when it comes via PM.
- My sister Ann's brother -
It could easily have been cut into a much smaller piece. Didn't you notice that jagabo's reencode was itself a small section of what you made available to him. If you don't know how to cut it, all you have to do is ask.
I obviously wouldn't risk my own account on VideoHelp because of copyright...
He's obviously very very young as he's asking about Sailor Moon episodes. Maybe we should cut him some slack? -
"all you have to do is ask" The only thing I've asked was how to do what I asked in the thread's post.
"He's obviously very very young as he's asking about Sailor Moon episodes. Maybe we should cut him some slack?" LOL, that's very sad. What do you do in life other than saying that? I politely asked for help on how to filter the lines of the anime yet you start assuming my age for no reason. If you have a problem you should consider visiting a doctor or something similar. If you can't help me, then you could just say "sorry, I don't know how to do this" or just ignore this post, instead of "No, he's very young." (sounds very offtopic).
___________________________
@jagabo Thank you for the help, that ended up pretty good! -
Last edited by LMotlow; 14th Nov 2018 at 20:25.
- My sister Ann's brother -
I played around with the video a bit more and came up with some darker, thicker lines:
Code:LWLibavVideoSource("Trim.mkv", format="YUY2") ColorMatrix(mode="rec.601->rec.709") ConvertToYV12() src=last ColorYUV(gain_y=70, off_y=-7, cont_u=130, cont_v=130) Crop(4,2,-4,-2) Stab(mirror=15) TemporalDegrain(SAD1=200, SAD2=150, sigma=8) # stronger noise reduction MergeChroma(last, aWarpSharp2(depth=10)) # sharpen chroma dehalo_alpha(rx=2.0, ry=2.0) Sharpen(0.0, 0.3) before = last olmask = TemporalDegrain(SAD1=800, SAD2=600, sigma=32).hysteria(8.0, usemask=false).mt_binarize(20).mt_inpand(chroma="-128").BinomialBlur(3,0) Overlay(hysteria(28.0, lowthresh=0, usemask=false), before, mask=olmask) Santiag() nnedi3_rpow2(2, cshift="Spline36Resize", fwidth=960, fheight=720) nnedi3_rpow2(2, cshift="Spline36Resize", fwidth=1440, fheight=1080)
-
The toon() filter is probably used as well.
My bigger question is always this: Why?
What's the point of it? The original anime already looks fine, enjoyable to watch.Last edited by lordsmurf; 14th Nov 2018 at 20:55.
Want my help? Ask here! (not via PM!)
FAQs: Best Blank Discs • Best TBCs • Best VCRs for capture • Restore VHS
Similar Threads
-
Enhancing a still from video
By jackhandsome in forum RestorationReplies: 58Last Post: 24th Oct 2018, 18:56 -
Anime series upscaled to make lines look better?
By zanzar in forum Newbie / General discussionsReplies: 20Last Post: 4th Dec 2016, 16:41 -
Enhancing some films in HD video
By carlmart in forum RestorationReplies: 7Last Post: 5th Oct 2016, 17:17 -
Trying to Restore anime lines, need help with avisyth scripts linedarkening
By kairukun in forum RestorationReplies: 3Last Post: 25th Nov 2015, 14:20 -
Enhancing MP4 ?
By PowerFalcon in forum Newbie / General discussionsReplies: 17Last Post: 12th Dec 2014, 14:12