Hi, I am completely new to this topic, and would like some help. I have a bunch of "travel videos" my dad made, and I am set with the task of converting them and making them playable with Roku via USB stick.
Step 1: Covert files ----- DONE
So I converted a bunch of MTS files to MP4 using Handbrake. It's a freeware program. Actually it converted them to something similar to MP4, but it plays on Roku, so its fine. (Kind of weird if I do 1 file it converts to MP4, if I do batch, it's something else)
Step 2: Combine files
Each batch of files has a count between 70 and 200. Roku only plays them one at a time, so I want to combine each batch into 1 file, or a few at most. I have no idea how to do this.
Step 3: Compress files
The videos were recorded on a Sony camcorder in 1080. The files are really large in size. Is it possible to compress them, at the same time keep the video quality, file type? I've watched 1080 movies that are 2 hours long less than 3 gb. These folders are like 10 gigs in size... If I could save some space while keeping the VQ, that would be awesome. It's just that it would still have to be playable on the Roku.
I really need help with the steps 2 and 3 here. Thank you
Our website is made possible by displaying online advertisements to our visitors. Consider supporting us by disable your adblocker or try DVDFab DRM and remove iTunes movie & music protection! :)
+ Reply to Thread
Results 1 to 6 of 6
Step 1: OK, good choice, Handbrake is great. You mention it converted batch files to something else.... Was it "m4v"? There's a setting to change this 'm4v', it's to do with Apple compatibility, however, it's not so important these days. (You can just change the extension to .mp4).
Step 2: Wow, this is really not my area but there are many programs to do this. Can I ask? Do you just want to combine lots of files, or, combine and maybe trim/edit these files? Depending on your answer, different programs may be needed. The members here will have many recommendations.
Step 3: Yes of course, it is possible to compress them. Maybe look at Step 2 first, get you files/videos/movies as you want them (as they are - skip step 1) then, and only then, proceed with compressing them.
Hope that in some small way helps. (don't convert/encode/transcode - edit - then convert/encode/transcode again)
Step 1: Yes i believe it was M4V it converted it to. It's weird that it changed because, I didn't change any of the settings. In fact everything was the same except number of files. But it doesn't really matter, Roku reads it - that's the important factor.
Step 2: The plan is just to combine them as is. Although it would be nice to know what I can use to trim if needed. (less important)
Step 1 may have been a mistake. Re-encoding with Handbrake reduced the quality for no reason. And if you are going to compress them further you will be reencoding again and losing more quality. You might have been able to remux the original files without reencoding the audio or video. Or even appended all the originals, compressed, and saved as MP4 all in one step.
Do this first: open one of your MTS files in MediaInfo, set it to Text view, and copy/paste the information here.
If the audio and video codecs are suitable for MP4 and the Roku you can simply remux to MP4 (no loss of quality and very fast). Open one of your files with AviDemux. Set Video and Audio to "Copy". Set the Output Format to MP4 Muxer. Save the video and try the resulting MP4 file on the Roku. The files will be a little smaller because MP4 has less overhead than MTS.
If that works you can append multiple segments with AviDemux by opening the first segment then appending further segments. You can then remux as above or re-encode to compress them. Try a simple remux first. Make sure there are no glitches when you playback the appended files. Watch for corruption between segments. And check audio sync.
Is this what you were looking for?
General ID : 0 (0x0) Complete name : C:\Users\varga\Videos\2017-07 Niagara, Canada\00000.MTS CompleteName_Last : C:\Users\varga\Videos\2017-07 Niagara, Canada\00063.MTS Format : BDAV Format/Info : Blu-ray Video File size : 9.55 GiB Duration : 3 s 63 ms Overall bit rate mode : Variable Overall bit rate : 26.8 Gb/s Maximum Overall bit rate : 18.0 Mb/s Recorded date : 2017-07-01 11:55:45-05:00 Writing application : Sony HDR-CX260V Video ID : 4113 (0x1011) Menu ID : 1 (0x1) Format : AVC Format/Info : Advanced Video Codec Format profile : High@L4 Format settings : CABAC / 2 Ref Frames Format settings, CABAC : Yes Format settings, RefFrames : 2 frames Format settings, GOP : M=2, N=15 Codec ID : 27 Duration : 2 s 436 ms Bit rate mode : Variable Bit rate : 25.7 Gb/s Maximum bit rate : 16.0 Mb/s Width : 1 440 pixels Height : 1 080 pixels Display aspect ratio : 16:9 Frame rate : 29.970 (30000/1001) FPS Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 8 bits Scan type : Interlaced Scan type, store method : Separated fields Scan order : Top Field First Bits/(Pixel*Frame) : 552.019 Stream size : 7.30 GiB (76%) IrisFNumber : 3.400000 Audio ID : 4352 (0x1100) Menu ID : 1 (0x1) Format : AC-3 Format/Info : Audio Coding 3 Commercial name : Dolby Digital Codec ID : 129 Duration : 2 s 528 ms Bit rate mode : Constant Bit rate : 256 kb/s Channel(s) : 2 channels Channel layout : L R Sampling rate : 48.0 kHz Frame rate : 31.250 FPS (1536 SPF) Bit depth : 16 bits Compression mode : Lossy Delay relative to video : -67 ms Stream size : 79.0 KiB (0%) Service kind : Complete Main Text ID : 4608 (0x1200) Menu ID : 1 (0x1) Format : PGS Codec ID : 144 Duration : 1 s 937 ms Delay relative to video : -67 ms
Yes, that is what I was looking for. As I guessed, your source can be directly muxed into an M4V container -- with no loss of quality. The file size will only be a little smaller though -- the M4V container is more efficient than transfer streams. AviDemux (free) is one of the simplest programs for this. Just set Audio and Video to "copy" and Output Format to MP4 Muxer. Since your source has a 4:3 frame size but a 16:9 display aspect ratio you have to force the Aspect ratio. Under Output Format -> Configure, enable Force Aspect Ratio, and DAR to 16:9. Then save your output.
You can also use AviDemux to append all your videos. Open the first source video, append all the others, then save as above. Try this with one set of video files and make sure the output doesn't have any audio or video glitches or sync errors.
If you really want to further compress your videos you can do that with AviDemux too. Open/Append all your sources, set Video to Mpeg4 AVC (x264), press Configure. Your source is interlaced so on the Frame tab select Interlaced and Top Field First. On the General tab select Encoding Mode Video Size (Two Pass) and a Target Video Size. The smaller you make the file the lower the quality will be. Keep in mind that interlaced home video does not compress as well as professionally shot film. That should be enough to get you started.