I just got a portable DVD player (Visteon Dockable Entertainment System), and I'm looking to get some hookups so that I can use it on a television. The highest quality output it is capable of is S-Video, which is perfectly fine for my setup. My question is, what kind of cords do I need?
The only video out port on the unit is a 3.5mm jack. The only direct 3.5mm to S-Video cord I can find online is this one; would this work? Obviously I'd need to run audio separately, but that's easy enough to do. I'm just not sure about the video. If I can't use this cord, then the only other thing I can think of doing would be to do some workaround like 3.5mm>BNC>S-Video, but preferably I would like to avoid that for compatibility and quality concerns.
If anyone with experience running their portable DVD player to TV can chime in, that'd be really helpful. And if there's a better cord to buy then the one I posted above, please let me know.
Our website is made possible by displaying online advertisements to our visitors. Consider supporting us by disable your adblocker or try DVDFab and copy, convert Blu-ray and DVDs! :)
+ Reply to Thread
Results 1 to 11 of 11
There's no standard for s-video on a 4 conductor pinplug connector. Each vendor uses their own mapping. That cable may or may not work. Just spend $20 and buy a new DVD player.
I know for a fact that it's possible to do 3.5mm to S-Video because this video shows it working. I'm just not sure what cables I need to do it.
For the cost and time of trying to get your unit working (which will give you mediocre results at best), you'd be better off getting an Android box or Raspberry Pi for <$50 and installing a GBA emulator and ROMs. I won't discuss getting the ROMs in keeping with the rules of this site.
But at the 3.5mm end there is no standard. Here are just a few variations:
None of those is for s-video, obviously. I was unable to find a wiring diagram for s-video on a 3.5mm jack. I just wanted to show how there are many variations on 4 pin 3.5mm jacks.
You may be lucky and find the cable you linked to works. Even if it doesn't work it probably won't fry either device or present a danger to you (we're talking about <1 volt low current signals). If you know someone with an oscilloscope they can check the device and cable to determine if the cable is correctly wired for you.
Last edited by jagabo; 10th Aug 2018 at 20:35.
Look up the model of the device, find the part number of the official adapter accessory, buy it on ebay.
I had something similar with my WDTV live, I picked it up used with the cable missing -
The mini-plug to composite/audio cable had a custom pin-out; the generic one I had laying around didn't work.
A weird happened when I emailed them, they took my name and address, told me it would cost
$20. I didn't order it right away because I wanted to see if I could find a deal on eBay.
Then about 3 days later it showed up in the mail, even though I never officially ordered nor paid for it.
I would buy the eBay cable. If you're lucky, it will just work. If not, then cut the cable, strip the conductors and try swapping them around until it does. A multimeter would make finding the connections easier. Then solder, stick on some shrink tubing, and done.