VideoHelp Forum
+ Reply to Thread
Results 1 to 2 of 2
Thread
  1. I have a Blu-Ray I am encoding and every other scene it goes from super sharp to super blurry.

    Normally I just go through all the frames and decide which to sharpen and which to leave alone.

    I am trying to do that with the resizing this time, and I am always getting a system access error and the cause is debilinearm.avsi according to the error.

    This works fine if I use Lanczos and Spline, but when I try debilinear and spline it gives me the error.

    debilinear looks so much better to me for this but only for the blurry scenes. I would just use it on the whole thing, but it makes the sharper scenes so sharp that it looks horrible and hard on my eyes.


    here is the script I am using. Any idea why it will not work?

    LoadPlugin("C:\Program Files (x86)\MeGui\tools\dgavcindex\DGAVCDecode.dll")
    AVCSource("C:\Users\User\Desktop\Encoding\Wvn\Ep9\ 00004.dga")

    __film = last
    __t0 = __film.trim(0, 1447)
    __t1 = __film.trim(1464, 33855)
    __t0 ++ __t1

    __film = last
    __t0 = __film.trim(0, 6802).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t00 = __film.trim(6803, 6938).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.00 , ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t001 = __film.trim(6939, 7551).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t002 = __film.trim(7552, 7737).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.00 , ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t003 = __film.trim(7738, 8134).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t004 = __film.trim(8135, 8426).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.00 , ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t005 = __film.trim(8427, 8558).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t006 = __film.trim(8559, 8972).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.00 , ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t007 = __film.trim(8973, 9465).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t0v2 = __film.trim(9466, 9531).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.00 , ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t0v3 = __film.trim(9532, 11954).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t01 = __film.trim(11955, 12013).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.0 0, ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t02 = __film.trim(12014, 15956).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t03 = __film.trim(15957, 16172).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.0 0, ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t04 = __film.trim(16173, 16556).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t1 = __film.trim(16557, 16664).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.0 0, ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t2 = __film.trim(16665, 16890).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t3 = __film.trim(16891, 16998).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.0 0, ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t4 = __film.trim(16999, 19333).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t4v2 = __film.trim(19334, 19522).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.0 0, ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t4v3 = __film.trim(19523, 22602).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t4v4 = __film.trim(22603, 22654).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.0 0, ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t4v5 = __film.trim(22655, 22759).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t4v6 = __film.trim(22760, 22812).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.0 0, ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t4v7 = __film.trim(22813, 23672).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t4v8 = __film.trim(23673, 23868).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.0 0, ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t4v9 = __film.trim(23869, 24843).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t4v10 = __film.trim(24844, 24936).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.0 0, ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t4v11 = __film.trim(24937, 25607).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t5 = __film.trim(25608, 25719).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.0 0, ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t6 = __film.trim(25720, 25927).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t7 = __film.trim(25928, 25972).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.0 0, ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t8 = __film.trim(25973, 26004).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t9 = __film.trim(26005, 26058).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.0 0, ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t10 = __film.trim(26059, 26228).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t11 = __film.trim(26229, 26252).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.0 0, ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t12 = __film.trim(26253, 27522).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t13 = __film.trim(27523, 27548).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.0 0, ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t14 = __film.trim(27549, 28157).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t15 = __film.trim(28158, 28235).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.0 0, ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t16 = __film.trim(28236, 28379).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t17 = __film.trim(28380, 28406).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.0 0, ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t18 = __film.trim(28407, 28814).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t19 = __film.trim(28815, 28880).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.0 0, ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t20 = __film.trim(28881, 29980).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t21 = __film.trim(29981, 30004).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.0 0, ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t22 = __film.trim(30005, 30381).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t23 = __film.trim(30382, 30522).maa2(ss=4.00).LimitedSharpenFaster(ss_x=1.0 0, ss_y=1.00, strength=4, overshoot=0, undershoot=0, soft=0, edgemode=0).spline36resize(1280,720).blur(0.04)
    __t24 = __film.trim(30523, 33839).maa2(ss=4.00).debilinearm(1280, 720, thr=13).blur(0.03)
    __t0 ++ __t00 ++ __t001 ++ __t002 ++ __t003 ++ __t004 ++ __t005 ++ __t006 ++ __t007 ++ __t0v2 ++ __t0v3 ++ __t01 ++ __t02 ++ __t03 ++ __t04 ++ __t1 ++ __t2 ++ __t3 ++ __t4 ++ __t4v2 ++ __t4v3 ++ __t4v4 ++ __t4v5 ++ __t4v6 ++ __t4v7 ++ __t4v8 ++ __t4v9 ++ __t4v10 ++ __t4v11 ++ __t5 ++ __t6 ++ __t7 ++ __t8 ++ __t9 ++ __t10 ++ __t11 ++ __t12 ++ __t13 ++ __t14 ++ __t15 ++ __t16 ++ __t17 ++ __t18 ++ __t19 ++ __t20 ++ __t21 ++ __t22 ++ __t23 ++ __t24

    I attached the avsi file I am using. It claims line 36 in the script and line 67 in the .avsi is the reason but I didn't see anything on line 67.
    Image Attached Files
    Quote Quote  
  2. This works fine if I use debilinear in the first 10 trims or so, but once I keep adding it in to the rest, the error happens. Is there a limit to how many times it can be called in the script?
    Quote Quote  



Similar Threads