+ Reply to Thread
Results 271 to 288 of 288
Just joined in order to say a big thank you to @Atak_Snajpera for doing such a great job with this tool.
It took me a few goes to get an .iso that would work OK with the tool, but after running all night, this morning I found I had a perfect working copy of Windows 7 Ultimate, that's now running very well on a new Hystou fanless Mini PC, that has an i7-8550U. I also followed the link earlier in this thread to the thread by @mengqin, showing how to edit the .dll in the Intel UHD 620 graphics driver, and found that works a treat as well.
Many thanks again.
May I know if the Secure Boot is enabled and launch csm is disabled, will the installer still able to see my NVMe M.2 drive?
And do you have idea how can I dual boot my pc with currently Windows 10 installed, without reformatting my m.2 drive, cause I am not able to disable secure boot on my bios, after researching , it says I need to convert my ssd to gpt first.
Last edited by nicoting; 12th Jun 2019 at 22:12.
Hi after using this tool , I was able to see my ssd (Thanks to the maker of this tool)
Now my question is, Will I be able to continue installing Win 7 even secure boot is enabled and launch csm is disabled without loosing or breaking the system? cause I have Windows 10 currently installed on my SSD (Partition 4).
Waiting for answers before proceeding
OR do I need to do this first: https://www.qualityology.com/tech/disable-asus-motherboards-uefi-secure-boot/
NOTE: I partitioned my SSD , I now have 65GB Partition 5(unallocated) from my SSD drive (No warnings shown when Partition5 is selected)
Last edited by nicoting; 13th Jun 2019 at 00:00.
1) YOU NEED TO HAVE CSM ENABLED and THEN YOU MUST INSTALL ON MBR PARTITION!
2) USB PORTS WON'T WORK ON YOUR MOTHEBOARD AFTER INSTALLATION. AGAIN SEE FIRST POST!
Even I have 2.0 usb port from the motherboard?
Last edited by nicoting; 13th Jun 2019 at 05:50.
I finally tried to install Windows 7 (iso from using this tool), BUT it doesn't work for me
I am not sure why but after installing in my SSD "Starting Windows" appears then just stuck :
MOBO: Asus TUF B360M Plus Gaming (LGA1151) B360, mATX, 4*ddr4 - https://bit.ly/2MI3Iju
PROCESSOR: Intel Core i7 8700
SSD: 500GB Samsung 970 Evo Plus NVMe M.2 - https://bit.ly/2HR0u9W
NOTE: Tried booting on both CSM enabled & disabledddd
Thanks to the creator
Just a quick thank you for this excellent software which performed flawlessly .... perfect for those of us unable to countenance the idea of submitting to the W10 regime, and unconvinced, on the basis of currently testing Linux, it sufficiently user-friendly .... too much of a necessity to be a technician/command-line freak .....
Will its work on chipset Intel HM370? (HP Pavilion Power i5-8300H)
In important notes it says "wont work on Intel H370.
I have Intel HM370. Is that almost the same and it wont work?
I run software... it was fast... around 55min ready with [2019-07-18 19:15:52] The operation completed successfully.
But i cannot find the resulted .iso file.
I used Win7 Ultimate from thepiratebay that was shared by author.
Tried 4times... never got that result .iso file.
Should I donate for the project to get it or???
Edit: I tested also with en_windows_7_ultimate_with_sp1_x64_dvd_u_677332.is o.... same problem...
Log in attach.
Last edited by augustinbz; 19th Jul 2019 at 07:18.
Information for Ryzen 3000 users with older mainboards (pre-x570)
USB ports won't work on Intel H370 , B360 , H310 and newer chipsets! Use external PCI controller!
Because Win10 Installer has own native usb 3.0 support.