I’m looking for software that can burn 4k content to Blu-ray and keep the resolution, Dolby Atmos Track, and HDR. The 4k content is encoded in H.265 .MKV files. I’m trying to burn them to Blu-ray where they will play on a UHD Blu-ray player. I have tried DVDfab, nero, and other freeware and they all failed with various error messages. DVDfab is the closest I have come to burning them successfully. I’m able to create a Blu-ray with a regular 1080p H264 .MKV file with the Dolby Atmos track.
With DVDfab I was able to convert a 4k H265 .mkv to an .m2ts file. But it encodes it in H264 and HDR is lost. I even tried to burn the .m2ts file using “Nero BDMV” and it came up with an error saying only “.m2sts” file can be added to the “stream” folder. But the file is an .m2ts. \BDMV\STREAM\*.m2ts
DVD fab error:
Work 0 failed, Error = control graph control_filter_error error: filter name(filter_common_demux), type(1), id(33), get std_exception(bad allocation)
The MKV files can play using Plex keeping the resolution and HDR, but the ATMOS track is not passed through. I understand the requirements to play 4k movies on the PC. I don’t need it to play on the PC just need it to burn to a disc and play on a 4k Blu-ray player. I have the pioneer 4k burner and an LG BD-xl burner. So that should not be an issue.
Has anyone been successful with burning 4K Blu-ray?
Our website is made possible by displaying online advertisements to our visitors.
Please consider supporting us by disabling your ad blocker or buy a VSO converter software :)
Please consider supporting us by disabling your ad blocker or buy a VSO converter software :)
+ Reply to Thread
Results 1 to 15 of 15
It sounds like you are trying to author a UHD Blu-ray disc with standard Blu-ray authoring software, which is never going work. There are some significant differences between UHD Blu-ray and Blu-ray. For one thing, the Blu-ray spec allows VC1, H.264 or MPEG-2, but not H.265, plus UHD resolutions and HDR are not part of the Blu-ray spec. Also, while Dolby Atmos is used on commercial Blu-ray discs, consumer Blu-ray authoring software often has limitations on the audio formats that it will accept which exclude things like Dolby Atmos and DTS HD as input.
There is no consumer UHD Blu-ray authoring software available. Commercial UHD Blu-ray authoring software is way too expensive for mere mortals, and if that weren't enough, purchase is restricted to bonafide members of the entertainment industry.
Burning is not the same as authoring. If your audio and video are multiplexed in an appropriate container file, you may be able to burn your files as data with Imgburn. Playing them with a UHD Blu-ray player is another matter, where success depends on the UHD Blu-ray player's capabilities as a media file player.
Last edited by usually_quiet; 10th Jul 2017 at 12:09.Ignore list: hello_hello, tried
You can try to mux to (m2)ts using ffmpeg or tsMuxer. But going along the lines of what usually_quiet said: you will not be able to create a 100% compliant UltraHD Blu-ray at home. So the result may or may not work on every UltraHD Blu-ray player. (But the same is true for "normal" Blu-rays created at home. They are burnt, not pressed. Not encrypted. Their file compliance is questionable and often they are like some bastard child of Blu-ray and AVCHD. Unlike what many people believe there is no guaranteed playback with these.)
Note about mkv and TrueHD/Atmos:
Mkvtoolnix splits combined AC3+TrueHD tracks into two separate tracks. Make sure that you are selecting the correct track if that is happening for you.
Dvdfab allows you to keep the audio track and not downgrade the audio. That's why I was able to burn 1080p with the atmos track intact. My Xbox one passed the audio to my receiver fine but my expensive overpriced Samsung 4K Blu-ray player wouldn't pass the atmos audio track and in some cases wouldn't read burned Blu-rays. Other burned Blu-rays work on the xbox one (not 4k). I wish I had the Xbox One S instead of the Samsung 4k Blu-ray player but I'm waiting for the next Xbox.
Also I've tried imgburn to burn as data, but the Samsung 4k player won't pass atmos via mkv files like it would on a retail 4k disc. Xbox one doesn't read mkv files at all.
I'll try the suggestions that Sneaker made but my best bet may be to figure out how to get Plex to pass the atmos audio as I was it was able to play content in 4K and have HDR. Online searches show people have done it but I can't figure out how they did it with Plex
Why would it? The use of Dolby Atmos is restricted to commercially produced UHD Blu-ray discs and commercially produced Blu-ray discs. As far as the entertainment industry is concerned, nobody should be ripping them.
[Edit]I checked the Samsung UBD-K8500 manual's "Digital Output Selection" section. Media files are not mentioned there. The Samsung UBD-K8500 appears to be incapable of bitstreaming Dolby TrueHD/Dolby Atmos unless it is playing an authored UHD Blu-ray disc or an authored Blu-Ray disc.
Last edited by usually_quiet; 10th Jul 2017 at 17:42.Ignore list: hello_hello, tried
It seems the Plex server will stream Dolby Atmos, as long as the Plex client device and its player supports bitstreaming it to an audio receiver. The NVIDIA Shield TV (not cheap), which also supports UHD video and HDR 10, was recommended as a client. https://www.amazon.com/NVIDIA-SHIELD-Streaming-Media-Player-Version/dp/B01N1NT9Y6/Ignore list: hello_hello, tried
I have the same problem, trying to burn 4K video but no reasonably priced software is available, yet (I hope).
As a stopgap I burn my 4K material as a video file onto 25 or 50 GB blanks, 264 or 265 and the Samsung will play them just fine but I have simple stereo only.
Cyberlink Power Director is due with a new version in the next few month and I hope they will have that feature.
Last edited by Eugene157; 19th Jul 2017 at 13:12.
Plex, which seems to support streaming UHD video, HDR, and Dolby Atmos bitstreaming, as long as the Plex client device supports them.
I'm doubtful that the next version of Power Director will support UHD Blu-ray authoring, let alone with Dolby Atmos audio, for all the reasons mentioned previously in that other thread that you participated in. (Yes, I remember you from your other thread.)
Last edited by usually_quiet; 19th Jul 2017 at 14:09.Ignore list: hello_hello, tried
Well, that is not what I wanted to hear!!
Hard to believe, that with all the devices around that will take 4K format videos, that there is no simple way to burn in the UHD BR format!
What happened to all those guys that created the likes of ImgBurn, TsMuxer etc?
So all we can do is wait and hope.
No surprise at all. UHD BD format was never intended by its makers (H'wood, studios) to be a DIY process, much to our disappointment.
Deluxe format with deluxe features = deluxe process = deluxe cost & time (in their minds).
And there is some truth to that in that elements such as rec2020 and HDR by being so much richer must be more complex and treated more intricately to properly maneuver through the workflow.
"Those guys" still need to find time for their day job to earn a living. Most freeware developers don't make much from donations. Note that ImgBurn has not been updated since June 16, 2013, TsMuxer has not been updated since January 20, 2014, and multiAVCHD has not been updated since July 4,2012Ignore list: hello_hello, tried
Maybe the days of burning stuff to physical media is over? File playback from increasingly cheap HDD is a lot easier and less time consuming. I haven't burnt a disc let alone play one for years other than ripping my discs on my PC to my NAS. Same for my 78 shellacs, Vinyl, CD's etc... Oh yes and few Edison cylinders from my grandfather's collection....BeyonWiz T3 PVR ~ Popcorn C200 and A-500 ~ Samsung ES8000 65" LED TV ~ Windows 7 ~ Yamaha RX-A1030 ~ QnapTS851-4G
I’m glad I got some more feedback on this.
Someone was able to rip 4k Blu-ray disc with the proper folder structure. So for “testing” purposes I burned them to a triple layer BD-R (I used Verbatim). The disc burned fine and read fine on the PC. However the disc won’t read at all in the Samsung UBD-K8500 or an Xbox One S.
Cyberlink PowerDVD 17 is the only software that will play 4k disc but the systems requirements are insane. It will read the disc but I get an error stating I don’t meet the requirements. This was not a problem at first because I didn’t care to watch 4k on my PC.
So for now I have given up on physical disc (I’ll buy it in 4k if I really want the movie. Not paying $30 each for movies I may only watch once or twice)
Windows 10 can pass Dolby Atmos and 4k to the receiver. I think Media Player Classic can pass HDR content, but my TV doesn’t display the word “HDR” when I hit info like it normally would with retail disc, but it looks like HDR is active. I compared it with Plex which does pass HDR, but not Atmos.
My PC is hooked up to the Pioneer AVR via HDMI. Any MKV, M2ts, etc will play with the proper attributes e.g. 4k, Atmos, HDR, etc.
It’s still not perfect because my GPU can’t decode H.265 codec, so my CPU is doing all the work and it chokes my PC. But it plays.
H.264 1080p (with Atmos) content plays perfect.
A lot of work just to play 4k with Atmos huh? Lol
PowerDVD 17 4k playback:
Windows 10…………………. Check
UHD Blu-ray drive……….. Check
Kaby Lake i5 or i7………… Nope
Intel 200 series motherboards …… Nope
Intel Graphics and supports HDCP 2.2….. Nope
You need to connect the PC with an HDR-capable display using HDMI 2.0a/2.0b on both ends to pass HDR 10 metadata. HDMI 1.4 is unable to carry HDR 10 metadata, so the HDMI connections on most motherboards and many older video cards cannot provide it. I don't think DisplayPort 1.2 is able to carry HDR 10 metadata either, but DisplayPort 1.4 can.Ignore list: hello_hello, tried