VideoHelp Forum

Try DVDFab and download streaming video, copy, convert or make Blu-rays,DVDs! Download free trial !
+ Reply to Thread
Results 1 to 3 of 3

Threaded View

  1. I have the Panasonic HC V720, which I bought principally to do interviews. However, when I connect a mic to the external input, I get no sound from it. The on=-board mic works fine, all recording is fine but the problem remains no sound with an external mic connected.
    I have used two differentmics with the same negative result:
    TONOR 3.5mm Lavalier Lapel Mini Microphone Dual Headed Clip-on Mic
    Lavalier Lapel Clip-on Microphone TRRS 3.5mm Jack Handsfree Condenser
    I have checked the manual settings on the camcorder, where you can set levels, but the meters are flat with the pics attached. By the way, a warning comes up when I plug them in saying that the external mic might be in vision when the camera is on wide angle. This seems irrelevant but I thought I'd mention it
    Thanks for any help in advance,
    I look forward to hearing from you- and from the camera!
    Quote Quote  
  2. Looks as if you're trying to use 'TRRS' (Tip- Ring- Ring -Sleeve) (phone) type mics, rather than the required 'TRS' (Tip- Ring- Sleeve) (camcorder) style ...

    You'll need to use an adaptor like this one:ØDE-SC3-iPhone-Accessory-Black/dp/B00L6C8PNU/ref=sr_1_1?

    It's maybe cheaper to go for a mic with the right connector - like this:
    Quote Quote  
  3. The TRRS plug configuration is designed for phones. You generally need either a TRS (stereo) or TR (mono) plug for most camcorders.

    Try pulling the plug part way out and see if you get any signal at all. Since you're dealing with sub-$15 microphones, you're probably best off starting over.
    Quote Quote  

Similar Threads