VideoHelp Forum

Try DVDFab and download streaming video, copy, convert or make Blu-rays,DVDs! Download free trial !
+ Reply to Thread
Results 1 to 9 of 9
Thread
  1. I'm doing an install of AviSynth on a brand new computer with a new install of windows and I can't figure out what I'm doing wrong. I'm using Windows 7 Ultimate 64-bit.

    I think it's files that go into the system32 or SysWOW64 folders I'm missing?? These exact same files I have setup on two other computers and they work perfectly fine.

    I installed Avisynth 2.6 and VirtualDub 1.10.4 and copied all my DLL folder and plugins folder over so everything is the same but the extra files you put in those folders mentioned above?

    Anyways here is the script (I preload all plugins) and error message attached:

    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\DirectShowSource.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\AddGrainC.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\Average.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\mt_masktools-26.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\mvtools2.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\masktools2.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\dfttest.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\EEDI2.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\eedi3.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\FFT3DFilter.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\SSE2Tools.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\RemoveGrainSSE2.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\nnedi2.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\nnedi.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\nnedi3.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\RemoveDirt.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\RemoveDirtS.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\RemoveDirtSSE2.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\TCPDeliver.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\TDeint.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\VerticalCleanerSSE2.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\GRunT.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\RepairSSE2.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\DePan.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\DePanEstimate.dll")
    LoadPlugin("C:\Program Files (x86)\AviSynth\dlls\TIVTC.dll")

    Many thanks!
    Image Attached Thumbnails Click image for larger version

Name:	Untitled.png
Views:	180
Size:	19.3 KB
ID:	39829  

    Quote Quote  
  2. Often Visual C++ run-time packages are needed. See e.g. http://avisynth.nl/index.php/Eedi3 (under "requirements").
    Quote Quote  
  3. Member Cornucopia's Avatar
    Join Date
    Oct 2001
    Location
    Deep in the Heart of Texas
    Search PM
    Start first with a minimal script (generate black & overlay iinfo) using NO plugins.
    Then, one by one add those plugins back in (and change script to use a feature of each) to see which ones' dependencies could have had issue.
    Then create your script to match your job, with ONLY including those plugins NECESSARY to complete that job.

    Minimal = less muddy waters = easier to troubleshoot = more successful.

    Scott
    Quote Quote  
  4. Groucho2004
    Guest
    You probably have to install the Visual Studio 2012 and/or 2013 Runtime.

    The easiest way to check your Avisynth install and associated plugins is to use AVSMeter. Run "AVSMeter -avsinfo -log" from the command line and it will tell you everything that's wrong and give you advice on how to fix it.
    Quote Quote  
  5. Here is a picture of all Visual C++ run-time packages I have installed

    I think I have all the required ones as I checked my other computers that have AviSynth working correctly and dont see that I'm missing any?

    Click image for larger version

Name:	rundtime.png
Views:	60
Size:	36.2 KB
ID:	39830

    Does this help?

    Thanks
    Quote Quote  
  6. Current eedi3 requires http://www.microsoft.com/en-us/download/details.aspx?id=40784
    http://avisynth.nl/index.php/Eedi3
    But it looks like you have that. If you're not using eedi3 just comment out that line and see how far your get.
    Quote Quote  
  7. Originally Posted by Groucho2004 View Post
    You probably have to install the Visual Studio 2012 and/or 2013 Runtime.

    The easiest way to check your Avisynth install and associated plugins is to use AVSMeter. Run "AVSMeter -avsinfo -log" from the command line and it will tell you everything that's wrong and give you advice on how to fix it.
    I downloaded this, not sure how to install as there are 2 exe files?

    and it is acommand line interface?

    not my strong point Click image for larger version

Name:	Untitled.png
Views:	30
Size:	9.2 KB
ID:	39831
    Quote Quote  
  8. Originally Posted by jagabo View Post
    Current eedi3 requires http://www.microsoft.com/en-us/download/details.aspx?id=40784
    http://avisynth.nl/index.php/Eedi3
    But it looks like you have that. If you're not using eedi3 just comment out that line and see how far your get.
    now I get the following error

    Click image for larger version

Name:	newerror.png
Views:	28
Size:	18.1 KB
ID:	39832

    only made it 2 more lines down
    Quote Quote  
  9. SSE2Tools requires MSVCR71.DLL. Not sure which VC runtime includes that.

    Regarding AVSMeter: just run it from a batch file:

    Code:
    "G:\Program Files\AvsMeter190\AvsMeter.exe" %1
    Pause
    You can drag/drop an AVS script onto that batch file. Or, put the batch file in your SendTo folder and you can right click on a AVS script and select SendTo -> batchname.bat (batchname.bat is whatever you called the batch file, I called it AVSMeter.bat). Be sure to change the path to where you have it extracted.
    Last edited by jagabo; 7th Dec 2016 at 08:58.
    Quote Quote  



Similar Threads