A better organized and up-to-date Japanese tutorial page would be this:
should be a better reference than NicoNico if you can read Japanese
+ Reply to Thread
Results 691 to 711 of 711
Stopping development until someone save me from poverty or get me out of Hong Kong...
Last edited by Gisselle_145; 10th Jul 2017 at 21:30.
Finally, after some days using AviUtl, I achieved that kind of 3D view of the videos I showed on my first post (#684, pg 23).
I thought it was a trick of the camera control, but I used the Group control to make the movements for all elements.
I attached the project file and the result.
*EDIT: I attached another attempt I made. This time I used a png HUD circle. I used Mask to separate in 2 and Wipe to make them appear. Looks like the effects applied to HUDs in AE.
Last edited by Gisselle_145; 13th Jul 2017 at 15:18.
New Object Tracking Plugin available
New CSV to EXO conversion tool available
I have overlooked one important thing... the best neural network object tracker is OUR BRAIN. So, in light of this enlightenment, I made
This plugin simply logs you mouse position w.r.t. the frames' coordinate, than write out the data to plain CSV.
This plugin does not give EXO directly. I decided to make the conversion part a separate tool because EVERY tracking plugin need this step, so don't bother to re-invent the wheel.
To convert the CSV, use the bundled python script, but note that it needs Anaconda 4.4 to run (utilized Numpy, PANDAS, pyplotlib)
The executable can be downloaded from the GitHub Release Page.
There are no special dependency except the usual VC2015 runtimes and DirectX
For details, read the README.md on GitHub repoStopping development until someone save me from poverty or get me out of Hong Kong...
【End of Support Notice】
Supporting AviUtl and OSS in general gave me nothing in return.
Doesn't help to get me a job, and donations can't cover maintenance and server fees.
In light of BIG loss with my AviUtl book in Hong Kong (~USD$6000), I'll stop all support for AviUtl and would no longer develop other soft without guaranteed returns.
My wp site will be shut down by the end of 2017 if I still got no employment by then.
(If you want to scrap my site, better do it now)Stopping development until someone save me from poverty or get me out of Hong Kong...
Been using AVIUTL for a long time yet I haven't been able to figure it out.
Iv'e been trying to get an audio spectrum something like:
But the spectrum [waveform] ends up being so fast and not smooth, like how it only reacts to the bass, and instead of if the bass is high, the waveform remains high, in AVIUTL it goes updown updown updown updown updown updown updown With constant bass, is there any soultions?
Hello, I'm the new user of Aviutl, and I have got some trouble while I was editing. At firstly when I put the original video into aviutl, the picture and sound attach perfectly, but after I split about 15~20 times the sound and picture are not play at same time anymore the sound always came up 1~2 second earlier than the picture. And I hardly to find solution on internet it seems like nobody really getting trouble with this or maybe it's my recording program's problem?[my recording program is Bandicam] can anyone help me to solve this problem?
P.S: I have already tick VBR-->CBR.
Thank you.[ first time posting text on this website, so if I post to the wrong place or said something wrong please tell me and I will delete this message ]
I don't know what the problem is, but it might be long-gop h264 in AVI container. The AVI container can have problems with long gop formats and seeking; sometimes frames get mixed up or you get green frames. Eitherway it's can pose problems unless you record in I-frame
So you might try remuxing into a different container like MKV (mkvtoolnix) first, before editing
You might be able to save your work / edits by just replacing the clip (not sure) , depending on how you have the project set up.
ok, I got it, thank for you replying.
Hi! I got an issue here.
Aviutl has been working well but when I select Custom object > RingWaveform@tetsu-EN or ConcentricRing@tetsu-EN doesn't appear anything in the preview screen. Is there some way to fix it? I can modify the tetsu-EN.obj file if necessary, I just need some guide.
Any help will be useful. Thanks.
My .mp4 files won't load... x264 is in use and the files use H.264...
Complete name : ＨＯＮ ＺＯＮＥ 【ボーカル抜き出し】.mp4
Format : MPEG-4
Format profile : Base Media
Codec ID : isom (isom/iso2/avc1/mp41)
File size : 5.75 MiB
Duration : 1 min 45 s
Overall bit rate : 459 kb/s
Writing application : Lavf56.40.101
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Baseline@L3
Format settings : 2 Ref Frames
Format settings, CABAC : No
Format settings, RefFrames : 2 frames
Format settings, GOP : M=1, N=90
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 1 min 44 s
Bit rate : 391 kb/s
Width : 512 pixels
Height : 384 pixels
Display aspect ratio : 4:3
Frame rate mode : Constant
Frame rate : 29.970 (29970/1000) FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.066
Stream size : 4.89 MiB (85%)
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : HE-AAC / LC
Format settings : NBC
Codec ID : mp4a-40-5
Duration : 1 min 45 s
Duration_LastFrame : -23 ms
Bit rate mode : Constant
Bit rate : 64.0 kb/s
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 44.1 kHz / 22.05 kHz
Frame rate : 21.533 FPS (1024 SPF)
Compression mode : Lossy
Stream size : 821 KiB (14%)
Default : Yes
Alternate group : 1
@Approximately - that should open . Are there any error messages ? What happens exactly when you try to import ?
1) rename the file to english characters only eg. "test.mp4"
2) make sure l-smash import plugin priority is higher (2nd , just below the project file reader ) . File=> settings=> import plugin priority.
Hello. Bit of a bump here.
I have a question about color space. I recorded a video with OBS with UV12 format, 709 full range, and the colors look like I want when I play it back.
However, when I open the file in AviUtl, the colors look too dark, like this.
It looks fine before opening it with AviUtl, so what's wrong?
By the way, Maverick, if you're still around, thanks for all your work on this. Without you, English speakers wouldn't know about this great software. I hope you have time to work on this again some day.
I'm getting a issue here. I downloaded Rigaya's Nvidia encoder. I installed it, but I can't render, and I can't understand the error. Btw, I have the last graphic driver. I have a Asus Rog Strix GTX 1060 6Gb. Processor AMD Ryzen 7 1700x. If someone can help me I will thank A LOT.
I was working on a video using aviutl and started getting this error when I try to do anything in the Advanced Editing window.
It applies to all projects, even new ones.
I can work with objects in a scene just fine.
Does anyone know what the cause of this is and how to fix it?
EDIT: Did some digging and finally came across a solution. It was right in front of me the whole time.
Last edited by partial; 17th Aug 2019 at 04:54. Reason: Accidentally uploaded same image twice