VideoHelp Forum

Try DVDFab and download streaming video, copy, convert or make Blu-rays,DVDs! Download free trial !
+ Reply to Thread
Page 9 of 19
FirstFirst ... 7 8 9 10 11 ... LastLast
Results 241 to 270 of 561
Thread
  1. Official site: http://potplayer.daum.net/
    I've heard official forum will be launched in the near future.

    mzso, can you leave me a file link for that? I'd like to try it. I have lav filters on my system too but never used it as I has been no problem with the internal things of potplayer's. If it is an issue on potplayer's side, why not report it via dev's mail?
    Quote Quote  
  2. Originally Posted by mzso View Post
    Originally Posted by sheppaul View Post
    Don't use lav filters as long as internal things just works without any problem. Seeking issue should be a problem of lav splitter too.
    It's usually an issue with potplayer. And if it works fine with mpc-hc it's almost certain. Anyway changing the dts(-hd) decoder or the video decoder (to another with dxva) would be prudent to figure out where exactly the problem lies.

    Everything with built in and standard setting dxva2 works with dts-hd, it was with lav filters hd audio and dxva combined did not work. Same setting in mpc and gom player worked with the external lav settings.

    So if I wanted to use sharks filters I could set lav for video and ffdshow for audio and it worked fine.
    Quote Quote  
  3. That's pretty strange.. Potplayer with lav filters work well here and there is no reason to use lav filters anyway if internal filters work without any problem. If you leave me a file link to test, I'll check it for you.
    Quote Quote  
  4. As I said, it works well with your sample. Potplayer works well with lav filters. So I guess there may be a problem in your setup.

    Click image for larger version

Name:	2014-05-30_21-33-16.png
Views:	1528
Size:	242.0 KB
ID:	25446
    Quote Quote  
  5. Cool. Thanks.

    Originally Posted by sheppaul View Post
    Official site: http://potplayer.daum.net/
    I've heard official forum will be launched in the near future.

    mzso, can you leave me a file link for that? I'd like to try it. I have lav filters on my system too but never used it as I has been no problem with the internal things of potplayer's. If it is an issue on potplayer's side, why not report it via dev's mail?
    A link for what? The repacked version you can get the repacked from here and the original was linked by Baldrick just now.
    Quote Quote  
  6. Originally Posted by bobolinkeuphoric View Post
    Everything with built in and standard setting dxva2 works with dts-hd, it was with lav filters hd audio and dxva combined did not work. Same setting in mpc and gom player worked with the external lav settings.

    So if I wanted to use sharks filters I could set lav for video and ffdshow for audio and it worked fine.
    Are you decoding DTS-CORE or DTS-HD-MA (requires external dll)

    Originally Posted by sheppaul View Post
    That's pretty strange.. Potplayer with lav filters work well here and there is no reason to use lav filters anyway if internal filters work without any problem. If you leave me a file link to test, I'll check it for you.
    There is it's historically more reliable. I ran into issues with the internal stuff a lot more often. At one point I had to mail the author a couple times because the internal splitter was bugged and there was no way to set LAV for blu-ray files. (mpls or bdmv files specifically) After that he allowed the external filters to load by default. (Couldn't convince him to allow setting external decoders to VP8/VP9 and DV1 though)
    Quote Quote  
  7. Made a capture, its with DTS-HD.
    Image Attached Thumbnails Click image for larger version

Name:	lav.jpg
Views:	492
Size:	307.0 KB
ID:	25447  

    Quote Quote  
  8. Member
    Join Date
    Jun 2012
    Location
    Gurupi
    Search Comp PM
    Me, the video did not work initially DXVA, but changed the dxva decoder that was on Intel QuickSync to DXVA Native in Lav video decoder, which functioned normally, sorry, I'm using google translator.
    See:

    Quote Quote  
  9. bobolinkeuphoric, the audio output in your screenshot is really weird. You are doing something wrong in your setup.

    I'm just wondering if lav video is working in dxva mode too.

    Disable the following built-in processing filters in the screenshot below and what version are you using? The latest version is 1.6.47995.

    Click image for larger version

Name:	2014-05-31_10-07-51.png
Views:	2843
Size:	42.0 KB
ID:	25449


    I guess there is another raw audio filter (maybe ffdshow) in your filter chain from your screenshot. Disable it if you can.
    Last edited by sheppaul; 30th May 2014 at 20:13.
    Quote Quote  
  10. Yes, im guessing its something with my setup. But potplayer is the only one I have problems with. No point in trying too hard to make it work, just wanted to mention it. This on the latest potplayer with the above settings.

    Using dxva native just freezes the player.

    What I have found out with lav audio\video is that with dts-hd and dxva copy on, the player just goes frame to frame. Disable dts-hd, and it starts playing fine with just dts. Disable dxva or set to intel quicksync it works with hd audio.

    To get it to play with dxva I can start it with dts, then when its playing enable dts-hd and it works.
    Quote Quote  
  11. Originally Posted by bobolinkeuphoric View Post
    Made a capture, its with DTS-HD.
    That doesn't mean anything. You should check filter > lav audio decoder > status tab. It should say "dts-hd ma".

    (If you don't have dtsdecoderdll.dll it most definitely doesn't decode dts-hd ma. It can't.)

    You should also check LAV video the same way. It should show "active". Try changing the DXVA modes, if you didn't so far. Also what kind of Video card you have?
    Quote Quote  
  12. Originally Posted by bobolinkeuphoric View Post
    Yes, im guessing its something with my setup. But potplayer is the only one I have problems with. No point in trying too hard to make it work, just wanted to mention it. This on the latest potplayer with the above settings.

    Using dxva native just freezes the player.

    What I have found out with lav audio\video is that with dts-hd and dxva copy on, the player just goes frame to frame. Disable dts-hd, and it starts playing fine with just dts. Disable dxva or set to intel quicksync it works with hd audio.

    To get it to play with dxva I can start it with dts, then when its playing enable dts-hd and it works.
    Also what splitter do you use?
    Quote Quote  
  13. I bitstream the audio, so no decoding. I was using lav splitter, tried built in with same resource. Then tried FFmpeg splitter, and it started playing and audio worked, but the pc froze after a few sec and potplayer crashed.

    Im on Intel Core i5-3337U with hd4000
    Quote Quote  
  14. It can be a bug. I've reported it on behalf of you.

    By the way, you should have mentioned that you're using bitstreaming in the first place.
    Quote Quote  
  15. Originally Posted by sheppaul View Post
    Official site: http://potplayer.daum.net/
    I've heard official forum will be launched in the near future.
    By the way where did you get this information?

    Also, out of curiosity: Were you decoding actual DTS-HD MA? AKA did you have dtsdecoder.dll installed in potp or/and LAV? (The potplayer osd info is irrelevant it's wrong half the time.)
    Quote Quote  
  16. Originally Posted by mzso View Post
    By the way where did you get this information?

    Also, out of curiosity: Were you decoding actual DTS-HD MA? AKA did you have dtsdecoder.dll installed in potp or/and LAV? (The potplayer osd info is irrelevant it's wrong half the time.)
    From the developer of potplayer.

    Yes, you can see the filename in my screenshot above but i have no idea why the OSD info displays DTS instead of DTS-HD.

    Click image for larger version

Name:	2014-06-02_18-40-56.png
Views:	1514
Size:	375.8 KB
ID:	25495

    General
    Unique ID : 96481281794247463810653104832976814669 (0x48959E74B082E4E5F109F8C80F74824D)
    Complete name : E:\Downloads\@ samples\surround_dts-hd_ma_7.1.mkv
    Format : Matroska
    Format version : Version 2
    File size : 37.8 MiB
    Duration : 11s 29ms
    Overall bit rate mode : Variable
    Overall bit rate : 28.8 Mbps
    Encoded date : UTC 2010-10-20 15:05:28
    Writing application : MakeMKV v1.6.0 win(x86-release)
    Writing library : libmakemkv v1.6.0 (0.7.7/0.8.1) win(x86-release)

    Video
    ID : 1
    Format : AVC
    Format/Info : Advanced Video Codec
    Format profile : High@L4.1
    Format settings, CABAC : Yes
    Format settings, ReFrames : 2 frames
    Codec ID : V_MPEG4/ISO/AVC
    Duration : 11s 44ms
    Bit rate mode : Variable
    Width : 1 920 pixels
    Height : 1 080 pixels
    Display aspect ratio : 16:9
    Frame rate mode : Constant
    Frame rate : 29.970 fps
    Color space : YUV
    Chroma subsampling : 4:2:0
    Bit depth : 8 bits
    Scan type : Interlaced
    Language : English
    Default : Yes
    Forced : No

    Audio
    ID : 2
    Format : DTS
    Format/Info : Digital Theater Systems
    Format profile : MA / Core
    Mode : 16
    Format settings, Endianness : Big
    Codec ID : A_DTS
    Duration : 11s 29ms
    Bit rate mode : Variable
    Bit rate : Unknown / 1 509 Kbps
    Channel(s) : 8 channels / 6 channels
    Channel positions : Front: L C R, Side: L R, Back: L R, LFE / Front: L C R, Side: L R, LFE
    Sampling rate : 96.0 KHz / 48.0 KHz
    Bit depth : 24 bits
    Compression mode : Lossless / Lossy
    Title : Losless
    Language : jap
    Default : Yes
    Forced : No
    Quote Quote  
  17. bobolinkeuphoric, try this one. There is an update today.

    http://get.daum.net/PotPlayer/Beta/PotPlayerSetup.exe
    Quote Quote  
  18. same issue with the beta, so just set audio to internal with pass through. Think I tried 4 players to test, and potplayer was the one that had problem starting the video.

    The settings used.
    splitter:lav
    audio:lav (bitstream)
    video:lav dxva2 copyback, Native mode crashes potplayer

    built in video processing settings: disabled.
    built in audio processing settings:disabled
    Quote Quote  
  19. So, potplayer seems to cause an error with the combination of intel HD4000 and lav dxva2.

    I cannot confirm your problem. If you're sure about the problem, it's time to report your problerm: ahahlive@hanmail.net


    The problem I had reported was fixed in the version released yesterday.
    Quote Quote  
  20. I'm a MEGA Super Moderator Baldrick's Avatar
    Join Date
    Aug 2000
    Location
    Sweden
    Search Comp PM
    Does daum post the BETA changelog on some site?

    I can only find it in the program,

    [1.6.48186] 2014/06/03
    ----------------------------------------------------------
    + Added ability to change window size under first playback only
    + Added color management function in pixel shader menu
    + Added ability to separately treat video/audio in random/repeat playback
    + Added ability to separately store skin position/size for video/audio playback

    - Fixed that can't play mod file
    - Fixed margins problem of SMI subtitles
    - Fixed that Native Stereoscopic 3D output function did not work properly
    - Fixed that some shortcuts in playlist did not work properly
    - Fixed that repeat playback function did not work in random mode
    Quote Quote  
  21. Originally Posted by Baldrick View Post
    + Added color management function in pixel shader menu
    Anyone figured out how to get this working? I can't find any config panel in order to input the RGBW coordinates of the display and what gamut to map to
    Quote Quote  
  22. There is a problem using the video recorder(Capture) function.I had to uninstall the new version & re-install version 1.5.40688 where it works fine.I didn't try the version in between these versions.The new KMPlayer has problems too.
    After i record using the new version of Potplayer,the audio is an octave lower than it should be when i play it back & the video is jumpy while recording & when playing back.
    In KMP it won't record when you choose certain output formats,& the other formats record,but no video when playing back just audio.I know this is a Potplayer discussion & not KMP,but i needed to explain.Anybody else with this problem?
    Playing downloaded files & dvd's play fine with new versions.
    I am on Windows 7 Ultimate 32-bit & use default settings for audio & video(in Potplayer).
    Quote Quote  
  23. This is not happening here..
    Quote Quote  
  24. I solved it.I did a fresh install of the latest version of Potplayer & it works fine.Uninstalled KMPlayer.
    Quote Quote  
  25. Thanks for this software, is a great player
    There's a problem with WarpSharp in PotPlayer x64 (Stable Version) , when I use it, the cpu is going to 100%.
    PotPlayer x64 1.648576 -> Video Processing -> There aren't problems with Motion Blur and Deband and others, except with WarpSharp.
    Before, when I used WarpSharp in previous versions, there weren't problems.
    Please fix it.
    Quote Quote  
  26. Senior Member c627627's Avatar
    Join Date
    Oct 2004
    Location
    Kansas
    Search Comp PM
    The following Rewind commands do not work under latest version 1.6.48576:
    ID_DVD_SPEED_B8X
    ID_PLAY_PREV_FRAME

    (Fast Forwarding commands work but not Rewind commands)

    EDIT: They do work, but the picture does not move backwards.


    On which forum would I ask about making Daum PotPlayer skins?
    Last edited by c627627; 4th Jul 2014 at 17:31.
    Quote Quote  
  27. DECEASED
    Join Date
    Jun 2009
    Location
    Heaven
    Search Comp PM
    Originally Posted by c627627 View Post
    On which forum would I ask about making Daum PotPlayer skins?
    Probably the author of the topic
    https://forum.videohelp.com/threads/351386-Potplayer-%5B-%5D-skins
    can help you.
    Last edited by El Heggunte; 19th Jun 2014 at 01:07. Reason: damn keyboard : - /
    Quote Quote  
  28. Originally Posted by TheSuperPhoenix View Post
    Thanks for this software, is a great player
    There's a problem with WarpSharp in PotPlayer x64 (Stable Version) , when I use it, the cpu is going to 100%.
    PotPlayer x64 1.648576 -> Video Processing -> There aren't problems with Motion Blur and Deband and others, except with WarpSharp.
    Before, when I used WarpSharp in previous versions, there weren't problems.
    Please fix it.
    Read first post. What made you think that this is an official forum? By the way. I wouldn't use "Please fix it" when I report bugs to the dev. Just because you add please it's still demanding...
    Quote Quote  



Similar Threads