Need Help with IFOEdit

[SouthGaBoy]

I am trying to remove the FBI warning Screen but it is not located in the VIDEO_TS.IFO file, its actually located in the VTS_02_0.IFO file. How do i keep it from playing back when burning to DVD? I use a standalone dvd player connected to a HDTV. Any Help on this would be welcome. I have already tried looking for guides and such but to no avail, every guide i come across tells me to open the VIDEO_TS.ifo file to remove it. I have tried using VOBrator to find the VOB id but the warning screen is not listed in the video_ts.ifo file.

[Baldrick]

Maybe use pgcedit instead, see http://jean.laroche.free.fr/SkippingStuff0.4.3.1/index.html

[SouthGaBoy]

Thanks, I will try that, although I have never used pgcedit.


EDIT: It Worked Perfectly, Thank You for the link to that information, I've been working on this for two days now.

[manono]

Thanks, I will Try that, although i have never used pgcedit.

After opening the DVD in PGCEdit, turn on the Trace (up at the top, Trace->Trace Mode). Then sort of in the bottom left-center hit "Next PB" and then preview where it stops (at the top, Preview->Preview PGC). When you find it, go to the little icon of film with an 'X' across it near the top right and hit it and kill PGC playback. Save and test it out.

There's an old guide for this and if you understand the layout has changed considerably since it was written, you may still find it useful:

http://jean.laroche.free.fr/SkippingStuff0.4.3.1/index.html

PGCEdit will only skip over these things (warnings, logos, previews and other crap). They can also actually be removed from the DVD to make it smaller, but you didn't ask about that.