Problem in Converting MKV To MP4

[ashe09]

General
Complete name : D:\imp\MKV\I know-1.mkv
Format : Matroska
File size : 3.08 GiB
Duration : 1h 37mn
Overall bit rate : 4 542 Kbps
Encoded date : UTC 2012-02-24 17:03:32
Writing application : mkvmerge v5.1.0 ('And so it goes') built on Nov 28 2011 23:58:28
Writing library : libebml v1.2.3 + libmatroska v1.3.0

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L3.0
Format settings, CABAC : Yes
Format settings, ReFrames : 3 frames
Muxing mode : Container profile=Unknown@3.0
Codec ID : V_MPEG4/ISO/AVC
Duration : 1h 37mn
Nominal bit rate : 3 047 Kbps
Width : 720 pixels
Height : 480 pixels
Display aspect ratio : 16:9
Original display aspect ratio : 16:9
Frame rate : 25.000 fps
Original frame rate : 23.976 fps
Standard : NTSC
Resolution : 24 bits
Colorimetry : 4:2:0
Scan type : Progressive
Bits/(Pixel*Frame) : 0.353
Writing library : x264 core 112
Encoding settings : cabac=1 / ref=2 / deblock=1:0:0 / analyse=0x1:0x111 / me=hex / subme=6 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=0 / me_range=16 / chroma_me=1 / trellis=0 / 8x8dct=0 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=3 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / constrained_intra=0 / bframes=2 / b_pyramid=1 / b_adapt=1 / b_bias=0 / direct=1 / weightb=0 / open_gop=0 / weightp=2 / keyint=240 / keyint_min=23 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=abr / mbtree=1 / bitrate=3047 / ratetol=1.0 / qcomp=0.60 / qpmin=3 / qpmax=51 / qpstep=4 / ip_ratio=1.40 / aq=1:1.00
colour_primaries : BT.601-6 525, BT.1358 525, BT.1700 NTSC, SMPTE 170M
transfer_characteristics : BT.709-5, BT.1361
matrix_coefficients : BT.601-6 525, BT.1358 525, BT.1700 NTSC, SMPTE 170M

Audio
ID : 2
Format : PCM
Codec ID : A_PCM/INT/LIT
Duration : 1h 37mn
Bit rate mode : Constant
Channel(s) : 2 channels
Sampling rate : 44.1 KHz
Resolution : 16 bits






this is the detail of my video and audio file ,
when i converting MKV to MP4 in format factory,
format factory is hang,even cannot close the software,
any solution ?

[Baldrick]

Try a mkv to mp4 tool like mkv2mp4 or rebox.net or gotsent.

[Baldrick]

Or if you want to shrink try VidCoder or Handbrake.

[ashe09]

Thanks

[ashe09]

i use both
but handbrake quality is good but take almost 4 hours,
vidcoder quality is not up to the mark but fast encoding (less than 1 hour),
so now i want more information about vidcoder, any hint..................

[Baldrick]

Vidcoder is based on handbrake so you should get same quality. But they might use different default settings and x264 profiles.

Try increase the video avg bitrate/bigger file size or use a lower constant quality value, and use a "slower" x264 preset for better quality. You find those settings under video in vidcoder.

Screenshot:

[ashe09]

ok i try that but,
i can't under stand advanced option

[Chef Goldblum]

If you want to shrink the size of the mkv while converting you can use something like handbrake or vidcoder like Baldrick suggests. If you just want to change containers, use gotsent. It's easy to use, and you can just copy the video stream to the new MP4 instead of converting it. This process takes only a few minutes. Not like transcoding which takes hours in most cases.