Hi guys today i buy pc tv card combo Asus My Cinema-ES3-110/PTS/FM/AV/RC mine main usage wanted to be sat tv ( i have skystar-2 for many years now from first revision up to the latest 2.6d and I'm very happy with it ). Because i didnt have pci slots available anymore and wanted to dicth my also odl pinnacle analog tv card i bought this card to replace the two. The problem is that card is working excelent as analog tv card even dvb-t is working great the picture is clear and very stable, but I have problem with sat tv. I installed the drivers and I already had installed dvbviewer and progdvb ( i use them regularly with skystar-2) and rescan the devices and both found the card as asus es3-110. I rerun the scan satellite and the new card found some channels that were very weak before and skystar didn't catch them ( the satelites were astra 19,2;hotbird 13;nilsat7;hispasat 30. So far so good but when i trie to warch the chanels in dvbviewer and prog dvb it shows 28% and no picture, in windows media center founds the chanels also but when i try to watch them it says no tv signal detected ( and it found it during scan very strange ) in power cinema 5( which came with the card id didnt recognise the card at all ). I read somewhere on internet that this card has problem ( which is driver or software problem somebody solved with reinstall of the drivers ), but i tried that and even downloaded new ones from int same problem. Does anyone have any experience with these
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays! or rip iTunes movies!
+ Reply to Thread
Results 1 to 5 of 5
Thread
-
-
So this new card does analog, dvb-t and dvb-s ? wow
I have a skystar 2 (dvb-s) and use dvbviewer since a few years now so i know a thing or two.
The first thing that comes to mind is bad drivers. The second : itcan be a software problem. There is an utility that's quite useful called Transedit mcc which you may wanna use to be sure it's not a software issue (see dvbviewer member section) on their website
A third possibility: video codec problem. If you're running windows 7 which use the EVR renderer by default, certain codec will be in trouble (no picture), although by default on 7 microsoft dtv decoder is enabled (= no problem)*** DIGITIZING VHS / ANALOG VIDEOS SINCE 2001**** GEAR: JVC HR-S7700MS, TOSHIBA V733EF AND MORE -
So this new card does analog, dvb-t and dvb-s ? wow
I have a skystar 2 (dvb-s) and use dvbviewer since a few years now so i know a thing or two.
The first thing that comes to mind is bad drivers. The second : itcan be a software problem. There is an utility that's quite useful called Transedit mcc which you may wanna use to be sure it's not a software issue (see dvbviewer member section) on their website
A third possibility: video codec problem. If you're running windows 7 which use the EVR renderer by default, certain codec will be in trouble (no picture), although by default on 7 microsoft dtv decoder is enabled (= no problem)
http://imageshack.us/g/507/76582843.png/ -
If you use a motor maybe that's the root of the matter here, perhaps a problem with the current delivery (not enough amps ?) , just a tought i had. Ask on dvbviewer forums they should know better.
Like i said try to scan the channels with transedit mmc to be sure there is no picture*** DIGITIZING VHS / ANALOG VIDEOS SINCE 2001**** GEAR: JVC HR-S7700MS, TOSHIBA V733EF AND MORE -
If you use a motor maybe that's the root of the matter here, perhaps a problem with the current delivery (not enough amps ?) , just a tought i had.
Ask on dvbviewer forums they should know better.
I think is something pretty messy with sat section of this card that asus doesn't want to admit. next to signal is 04-0.8 mb/s i think it should be in the 3-4 or for some channels 7-9 mb/s so something is limiting bandwidth somehow. That's why the picture doesn't want to show up but when I scan channels it scans them well in all programs ( dvbviewer, progdvb, and even media center) the lnb is mti ( i have 3 others from strong and Philips that I will try tomorrow) high line http://www.mti.com.tw/_english/02_products/03products.php?MainID=2&SID=19&ID=26 also it has 100ma power line which I don't think is the problem ( sky star 2 doesn't have any problem at all). The nxp chip is responsible for decoding and tuning ( its one ) for dvb-t and dvb-s and analog so I don't think its his fault
So far I didn't solve this I saw only 2-4 treads about this problem so I don't think there many users that bought this card for satellite viewing and considering that majority here is in usa land ( and they have other sat system) don't think that many will have the answer I will write email to asus but i don't expect miracles from them
Similar Threads
-
DVB-S/DVB-S2 Satellite Receiver with direct HD,SD/SDI output not HDMI
By rahemeen in forum DVB / IPTVReplies: 1Last Post: 19th May 2011, 05:38 -
(Satellite Broadcasting) Wider Video observed on retransmitted signal
By kenshin03 in forum DVB / IPTVReplies: 14Last Post: 24th Nov 2010, 18:00 -
ASUS My Cinema-U3000 Mini Problem
By TheLarch in forum CapturingReplies: 0Last Post: 8th Feb 2008, 06:16 -
help to set up a dvr and satellite signal input box, please
By The Muddler in forum DVD & Blu-ray RecordersReplies: 7Last Post: 14th Jan 2008, 13:33 -
Asus My Cinema P7131 Hybrid Capture Card - No Audio or Digital Reception
By Duchess in forum LinuxReplies: 10Last Post: 5th Jul 2007, 06:55