I am using the above to capture uncompressed AVI from my NTSC Hi8 machine. This works well, but I do have a query...
When I play the captured AVI through any player (VLC, Windows Media Player for example) onto my computer screen, the output appears to be interlaced, so it looks like these don't automatically recognise that the file is interlaced. When I use GSpot on the file, it is showing the frame rate as 29.97, but is not showing any field rate (which I'd have thought should be showing 59.94).
I find this strange as when I used the Canopus ADVC-55 to capture the video as DV, VLC and WMP would automatically deinterlace, and in GSpot it would show as 29.97frames with 59.94fields.
Anybody know if I'm doing anything wrong?
I'm hoping to archive all my Hi8 tapes, so thought that capturing them using VirtualDub and something like Huffyuv would be the way to go, but am worried that the captured video file not "advertising" itself as interlaced could be a problem, especially when I get around to editing all that video and converting it to other formats.
+ Reply to Thread
Results 1 to 23 of 23
AVI doesn't really support interlaced video. Individual codecsused within AVI (like DV) can signal the video is interlaced but only if the receiver knows how to look for it. If your editor doesn't automatically detect the video is interlaced you can usually just override what it thinks of the video by setting the source properties.
First BMI only caps interlace so it is up to you to identify the cap file as interlace and the field order prior to recode.
Wait! I think you mistook BMI as a consumer product. It caps to an intermediate file intended to be encoded to a different distribution format. The technician is expected to manage the encode.
Be back later but it would help to better describe your capture settings.
Last edited by kauri; 8th Nov 2011 at 21:06.
Your attachments don't work, but everything sounds fine
It's normal for WMP not to automatically deinterlace huffyuv/AVI
You didn't mention this, but the aspect ratio is probably wrong as well. That's normal too. It probably plays as square pixel instead of 4:3 or 16:9. (things probably look slightly distorted, like a circle looks like an oval)
These things are interpreted in the editing software
Edit: Fixed now
My main worry is that the editing software (like Adobe Premiere Pro) is not going to permit me to properly edit the video as it may not recognise the file as an NTSC interlaced AVI file.
Last edited by kauri; 8th Nov 2011 at 21:08.
Maybe you get the new member preferred treatment
This is what is says for me
"Invalid Attachment specified. If you followed a valid link, please notify the administrator"
It will work fine for premiere pro. You right click the files in the clip bin and interpet the file , both the aspect ratio and field order. This is standard procedure for many intermediate file types like huffyuv, lagarith, etc... most editing programs assume square pixel for AVI
mmm... In Adobe Pro v7 I only get as per attachment. Nothing about field order.
Yes, looks like the newer CS has that capability. Unfortunately insufficient funds to upgrade . So to summarise:
- uncompressed or huffyvu/lagarith compressed interlaced video AVI files do not contain information to indicate that they are actually interlaced (with two fields in every frame).
- the editing software needs to determine if the file is interlaced video.
Based on the above, I would assume that Adobe Premiere Pro 7, for any effects/transitions, would just apply the transition to each frame instead of each field in the frame? I have played with Adobe Premiere Pro 7 using a BMIP capture through VirtualDub (huffyuv). When I "made the movie" into a DVD compatible file, it looked like WMP knew it was interlaced and played it correctly (without interlacing visible) on the monitor, so things look OK. But I'm not sure what is actually happening 'under the hood', so don't know if I'm getting the best out of it.
I've also got the Canopus ADVC-55. The video capture files are recognised by Adobe Premiere Pro 7 as NTSC Interlaced Video. So no problems there. But I understand that DV-AVI, as it is compressed and for other reasons, does not produce the same quality output as capturing uncompressed. Hence my reason for going the Blackmagic Intensity Pro route. But if it means spending more money to get editing software that can recognise AVI files as interlaced, I might as well have stayed with the Canopus solution.
HuffYUV and uncompressed YUV/RGB have no way of signalling interlaced and aspect ratio. And the AVI container doesn't have interlace or aspect ratio information. So you have to manually specify the video is interlaced, the field order, and the aspect ratio when you import them into an editor.
Last edited by jagabo; 8th Nov 2011 at 09:04.
I'd crop it down to 720x480 because that's the norm for most applications.
Thanks all for your patience...
Now for the last last query
I contacted Blackmagic tech support regarding NTSC AVI field order and they indicated that the card captures TFF. To confirm, I used AVISynth with VirtualDub:
When playing back through VirtualDub frame by frame, the motion was jerky (one frame forward, next frame back a bit). When I redid with AssumeBFF, the motion was smooth. This leads me to believe the card captures interlaced BFF, and not TFF
Can anyone confirm if the Blackmagic Intensity Pro captures NTSC interlaced BFF or TFF?
Yes, Blackmagic support has confirmed that NTSC SD is BFF.
You can capture directly in h264 using virtualdub, h264 supports interlaced. I use this settings for NTSC SD with my blackmagic
But with PAL you need to change the SAR , use the ARS Calculator for a properly aspect ratio on PAL material.
The extra commands if you can't see it are:
Last edited by henryperu77; 22nd Nov 2011 at 00:59.
You've mentioned that you're expecting your file to be NTSC (post #4) yet from your attachments you've got the BMIP set to PAL.Have a good one,
NEW! VideoHelp.com F@H team 166011!
Folding@Home FAQ and download: http://folding.stanford.edu/