VideoHelp Forum




+ Reply to Thread
Results 1 to 1 of 1
  1. This was done with a standard 0neForAll remote TV - Sat RCU.
    1.Turn off the DVD player. Press "Sat" key.
    You have to program the bottons from 1 to 5 of the OneforAll RCU. Codes for each botton:

    1=00189
    2=00255
    3=00095
    4=00221
    5=00079

    2.Firstly keep pressed 'MAGIC' button until red light blinks twice.
    3.Type 994 for single botton programming. The red light blinks twice again.
    4.Press 'MAGIC' again. The red light will blink once.
    5.Enter one of the 5 digit codes from above followed by the button number you are assaining it to (eg MAGIC + 00189 + 1). The red light blinks twice.
    6.NB. YOU MUST REPEAT STEP 4-6 BEFORE YOU TYPE IN EVERY CODE .
    7.After all codes have been entered (1-5), with the DVD player off, Press 1,2,3,4,5 on the One4All remote and the DVD player will start up and the word "SUCCESS" scrolls along the display window. Sony DVP-NS78H player is now region free!!!
    Last edited by kanns; 14th May 2010 at 15:48.
    Quote Quote  



Similar Threads

Visit our sponsor! Try DVDFab and backup Blu-rays!