looks like they're using dynamically created links to the FLVs (the "filename" is different every time), and also encrypted RTMPE URLs. even Jaksta can't catch the link to download it (although it somehow knows it's RTMPE , AND it catches the filename, though even THAT might be a ruse...
+ Reply to Thread
Results 31 to 60 of 4497
rtmpdump v2.3 will download the INTERPOL concert.
This command will do it:-
rtmpdump -r rtmpe://fmss.vpro.nl/media -p http://3voor12.vpro.nl/tv/#/44266170 -W http://3voor12.vpro.nl/flash/vodmediaplayer-25052009.swf -V -y mp4:44266170.mp4 -o video.mp4
Last edited by bat999; 8th Feb 2011 at 14:01.
Thank you so much for looking into that for me - I didn't have any luck though, rtmpdump v2.3 fired up with that command and downloaded about 600B for 4sec and then gave me an "ERROR: RTMP_ReadPacket, failed to read RTMP packet body. len: 74583"
Complete name : video.mp4 Format : Flash Video File size : 723 MiB Duration : 1h 24mn Overall bit rate : 1 194 Kbps Video Format : AVC Format/Info : Advanced Video Codec Format profile : Main@L3.1 Format settings, CABAC : Yes Format settings, ReFrames : 2 frames Format settings, GOP : M=2, N=16 Codec ID : 7 Duration : 1h 24mn Bit rate mode : Variable Maximum bit rate : 14.0 Mbps Width : 480 pixels Height : 270 pixels Display aspect ratio : 16:9 Frame rate mode : Constant Frame rate : 25.000 fps Standard : PAL Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 8 bits Scan type : Progressive Color primaries : BT.601-6 525, BT.1358 525, BT.1700 NTSC, SMPTE 170M Transfer characteristics : BT.601-6 525, BT.601-6 625, BT.1358 525, BT.1358 625, BT.1700 NTSC, SMPTE 170M Matrix coefficients : BT.601-6 525, BT.1358 525, BT.1700 NTSC, SMPTE 170M Audio Format : AAC Format/Info : Advanced Audio Codec Format profile : LC Codec ID : 10 Duration : 1h 24mn Channel(s) : 2 channels Channel positions : Front: L R Sampling rate : 48.0 KHz Compression mode : Lossy
i agree, give it another shot. having had an unreliable internet signal myself, i know that if the stream is interrupted for a certain period of time past the buffer, it can ruin a streaming download.
kind of something they should've addressed when they built teh internetz...darkflux
Thanks for that guys but I've tried it a hundred times now and it still doesn't work. I'm using a university's highspeed broadband connection so I don't think the signal is the problem, so I give up!!!
If any kind soul could rip it and megupload it for me I would be forever grateful!
I had no problems using the command line that bat999 gave.
to op, this was too easy..
1. just d/l rtmpdump-2.3 700kb
2. extract the files into a folder of your creation
... for this excercise, you only need the rtmpdump.exe file and a param string, (the one from bat999, above)
3. open a dos box window (ie, \start\run\cmd.exe) and type in the following, and just let it d/l the file. watch the dos screen as it shows you the percentage of completion.
-r rtmpe://fmss.vpro.nl/media -p http://3voor12.vpro.nl/tv/#/44266170 -W http://3voor12.vpro.nl/flash/vodmediaplayer-25052009.swf -V -y mp4:44266170.mp4 -o "g:\video.mp4"
if the line is too long to type in, you can create a .bat file (via .txt first then rename to .bat) and entere following:
rtmpdump.exe -r rtmpe://fmss.vpro.nl/media -p http://3voor12.vpro.nl/tv/#/44266170 -W http://3voor12.vpro.nl/flash/vodmediaplayer-25052009.swf -V -y mp4:44266170.mp4 -o "g:\video.mp4"
i think real tricky part of obtaining the url's. i'm not sure how he obtain those.
(be sure the file is in the same folder)
i'm d/ling that clip now though over DSL, (1184 kbps (123KBps) is my speed) so its little slow on my end, i'm at 14% completion so far. but since the clip looked interesting (and good) when i watched it stream for a moment, i decided to go for it...
thank you bat999, for another utility, now added to my gui tool suite of command line tools
now at ( 17% ) completion..
Good to hear everyone else is having no problems, thanks again to bat999 for giving us the URL (that really is the hardest part).
I have been doing this correctly (exactly as vhelp detailed) but my computer just doesn't want to get past 600kB for some reason.
If anyone has been able to download this video could PLEASE megaupload it for me (I know it's 700mb+ so would be very thankful), I can point you in the direction of plenty more high quality videos from his awesome band
Cheers and thanks again!
hey, i didn't realize that i was d/ling a whole concert. i went about my business and thinking that i d/l a few minute clip i dragged the .mp4 file into kmplayer though not realizing i was watching the whole 1h24m concert while i was working on my computer anyway this band reminds me of another band that directv freeview aired some years ago, i think, the Psychedelic Furs or something like that. anyways, it was a good concert, good camera work and quality, no noise like our cheap consumer crap under such lighting conditions, thank you. i still prefer the dave matthews but all i see is poor quality youtube. oh yet, the size is actually 740mb, too much for my dsl upload which is aprox 40KBps.
so, it seems that in order to get the urls to the clip(s) you have to use url snipper first, then bring each into rtmpdump and see what you get.. a bit trial and error i guess, but if all else fails like they sometimes do this technique seems doable. so i learned something new too, thanks everyone. good luck, ridley.
RTMPDump works with moshcam.com too.
Enmore Theatre, Sydney
8th December 2010
This is the command:-
rtmpdump -r "rtmpe://streaming.moshcam.com" -a "" -f "LNX 10,1,102,65" -W "http://www.moshcam.com/chooktv/Core/Flash/Container.swf" -p "http://www.moshcam.com/the-pretenders/enmore-theatre-849.aspx#/1-boots-of-chinese-plastic" -y "mp4:thepretenders_08122010_e_Moshcam_896k_480p.mp4" -o mp4_thepretenders_08122010_e_Moshcam_896k_480p.flv
Hi, I was wondering if anyone could help me rip this audio file:
I normally use StreamTransport, and it has always worked so far until today.
Hope someone here can help me out! Thanks in advance!
P.S. I tried what was described in this thread, found two rtmpe streams... but could not download them as described.
edit: I noticed the link might not be accessible directly. You may need to visit this website first:
And click on this image:
Last edited by ukoziak; 10th Feb 2011 at 23:23.
RTMPDump will download the file.
(Ignore the errors:-ERROR: DECODING ERROR, IGNORING BYTES UNTIL NEXT KNOWN PATTERN!)
This command worked for me:-
rtmpdump -r "rtmpe://fms-smn-bc.stream.co.jp:1935/smn-bc/_definst_?videoId=776494373001&lineUpId=&pubId=10176227001&playerId=10249907001&affiliateId=" -a "smn-bc/_definst_?videoId=776494373001&lineUpId=&pubId=10176227001&playerId=10249907001&affiliateId=" -f "LNX 10,1,102,65" -W "http://admin.brightcove.co.jp/viewer/jp1.25.00.00.2011-02-01104501/federatedVideoUI/BrightcovePlayer.swf" -p "http://www.sonymusic.co.jp/play/?ir18&in_IR065-89SFL" -y "contents/1102/IR/IR065-89?videoId=776494373001&lineUpId=&pubId=10176227001&playerId=10249907001&affiliateId=" -o IR065-89.flv
If you wish, you can extract the mp3 with ffmpeg like this:-
ffmpeg -i IR065-89.flv -acodec copy IR065-89.mp3
Last edited by bat999; 11th Feb 2011 at 00:25.
Maybe I'm too dump cause even following vhelp's instructions just to make sure I can download a simple/any flv, I couldn't!
I installed URL Snooper and was also prompted to install another program WINCAP something and then I copied RTMPDump(also called FLVStreamer) to my C drive...following vhelp's instructions but still no go..what did I do wrong? OS is W7 X64, do I need to open any ports or allow any outbound traffics for this thing to work? (my default is set to block all out going traffics...).
P/s for example http://3voor12.vpro.nl/tv/#/41129552/44266170/11..I'm getting download web page error and if there is any site that I can open with URL Snooper, there ISN'T any rtmpe entries at all?
I'm desperate, please help.
Last edited by tigerb; 11th Feb 2011 at 05:49.
Download rtmpdump-2.3-windows.zip from here:-http://rtmpdump.mplayerhq.hu/download/
Unzip it to make a folder named rtmpdump-2.3 on your desktop.
Then do \start\run\cmd to bring up the terminal (dos box window).
bat999, thanks for coming to my rescue! I followed your instructions carefully and this is what I got - see screen pix...is this correct and what should i do next?
Yup, that's correct tigerb.
rtmpdump -r "rtmp://184.108.40.206:1935/ondemand?_fcs_vhost=cp45413.edgefcs.net&undefined" -a "ondemand?_fcs_vhost=cp45413.edgefcs.net&undefined" -f "LNX 10,1,102,65" -W "http://www.bbc.co.uk/emp/10player.swf?revision=18269_21576" -p "http://www.bbc.co.uk/blogs/pm/2010/01/upshares_downshares_ends.shtml" -C B:0 -y "public/flash/news/uk/407000/407133_16x9_NewsWebFlash512" -o 407133_16x9_NewsWebFlash512.flv
bat999, I think I'm getting somewhere, lol....at least I see some downloading...ah found that 407133_16x9_NewsWebFlash512.flv file, it's in the same rtmp...folder on desktop....
I guess RTMPDump is working then, it's the Snooper that couldn't find any rtmp links for me to download?
Last edited by tigerb; 11th Feb 2011 at 06:38.
The file is in the rtmpdump-2.3 folder on your Desktop.
But it hasn't downloaded properly.
It got interrupted.
Delete it and try again.
OK, finally got it, you are excellent bat999!
Now that RTMP is working, help me with the Snooper or how to find the "rtmpe" links.....
I'm glad that you're in business.
If you put the rtmpdump.exe on your C drive you don't need to keep using cd Desktop etc.
But rtmpdump.exe needs to be put 'in the path'.
Probably in the system32 folder. In the same place as other exe files such as notepad.exe.
Then you could paste in the command straight after start\run\cmd.
But it's up to you. Keep it on the Desktop if you like.
It's a black art to find the links.
I use a program called rtmpsrv. It's in the rtmpdump-2.3 folder.
But I'm using Linux. It's not so difficult.
With Windows it's a different method. I've never tried it.
If you want to be the guinea-pig the instructions are here at post #6:- http://stream-recorder.com/forum/correctly-use-rtmpdump-rtmpsrv-t6906.html
Good luck with that.
Many thanks bat999, you are of great help.
I will read up on the link you provided, and maybe it's time to learn Linux!
I've shortened the code to:
"rtmpdump.exe" -r "rtmpe://fms-smn-bc.stream.co.jp:1935/smn-bc/_definst_?videoId=776494373001&lineUpId=&pubId=10176227001&playerId=10249907001&affiliateId=" -W "http://admin.brightcove.co.jp/viewer/jp1.25.00.00.2011-02-01104501/federatedVideoUI/BrightcovePlayer.swf" -y "contents/1102/IR/IR065-89?videoId=776494373001&lineUpId=&pubId=10176227001&playerId=10249907001&affiliateId=" -o "IR065-89.flv"
rtmpdump −r url
The only one I can't find myself is -r. Could you please explain how you found that, or if there is way I can get this address on Windows XP?
Couldn't get this adress via URL Snooper (as described in the opening post that is).
Thanks in advance!
p.s. I don't have much experience with this, this is as much as I could do I'm afraid.
bat999, I sent you a PM, please check your Inbox.
I'm gonna use my the other PC for Linux just for the sake of getting rtmp/e....which Linux distro would you recommend for someone who can only follows simple instructions but very keen and willing to learn.
Here's a guide on using rtmpsrv with Windows:
Worked for me!
Last edited by ukoziak; 11th Feb 2011 at 21:27.