Thank you for your advice!
I did it as you wrote the Recorder 2 remote control reprograming. I am afraid it has be done too good!
Namely now my Recorder 2 does not recognize nor the both remote control!
I tried to programing BACK the Recorder 2 to the basic situation and repeat the procedure, but without remote control I can not do anything.
So I ask your advice how could I turn back to the initial basic sutuation without remote control.
Thank you in advance!
+ Reply to Thread
Results 31 to 34 of 34
OK, finally I solved this remote control problem. Now it is working both of them correct (there is no a word about this in operating instructions).
Now I am thinking how could I connect the two recorders via the "control in" socket (for easier copying from one to other).
Unfortunately there are only "Control in" 3,5 mm Jack sockets on both equipment.
If there would be a "Control out" socket too on one equipment it could be much easier way to copy files from one equipment to other,
Glad you got the remotes working.
The "control in" cannot be used for copying. You'll have to use the various audio/video in and out plugs.