VideoHelp Forum




+ Reply to Thread
Results 1 to 6 of 6
  1. Member
    Join Date
    Sep 2005
    Location
    LOST in the USA
    Search Comp PM
    My brother has a D-link wireless router connected to a Dell PC by ethernet cable. My son tried to set the wireless feature using WEP but for some reasons, the HP laptop won't connect wirelessly. My son can only set the MAC address restriction as a little protection. I want to tell my brother to once in a while check if someone other than themselves are using their internet. Is there a simple way to show on the screen the people who are currently logged on wirelessly? Thanks.
    Quote Quote  
  2. Disgustipated TooLFooL's Avatar
    Join Date
    Feb 2004
    Location
    Opium Den
    Search Comp PM
    yes, you will be able to see all the current ip addresses being assigned by the router. i'd try to get the security set up, though..
    I am just a worthless liar,
    I am just an imbecil
    Quote Quote  
  3. aBigMeanie aedipuss's Avatar
    Join Date
    Oct 2005
    Location
    666th portal
    Search Comp PM
    with the computer attached by cable have him type in the address of the router in i.e.7. older dlinks were the usual http://192.168.0.1/ but some of the newer ones have a different address. it should be easy to find in the manual.

    to set up security you need to use that same comp that's hooked up by cable.
    --
    "a lot of people are better dead" - prisoner KSC2-303
    Quote Quote  
  4. Mod Neophyte redwudz's Avatar
    Join Date
    Sep 2002
    Location
    USA
    Search Comp PM
    With D-Link, log into the router, usually 192.168.0.1, with a browser, go to the log file and you should see all the connections. Make sure you use a secure password for the router or you may not be the only one that can log in.

    The log is usually on the 'Status' page. If it has the option, save it out, open in a word processor and find all the lines with your own IP addresses and eliminate them to make it easier to search. There's usually a lot of info there to dig through otherwise.

    There may be a simpler way, but the log will list any use, even when you aren't using the computer. I would read up a bit on using WEP or some other encryption and try to enable it. Of course it depends on your location. If a lot of networks show up on the wireless connection, you may be in a area that has a few hackers that may know how to spoof MAC addresses. But if there are only a few networks showing, the odds are more in your favor.
    Quote Quote  
  5. Member
    Join Date
    Sep 2005
    Location
    LOST in the USA
    Search Comp PM
    Thanks, guys. Although I may end up going over to my brother's house to do your instructions.
    Quote Quote  
  6. Member
    Join Date
    Oct 2005
    Location
    United States
    Search Comp PM
    I had the same problem when setting up my brother's HP notebook. HP had an issue with thier broadcom wireless card and there should be an updated driver for the computer. You can download it from their website or contact HP customer support for a link and instructions on updating the driver and implementing wireless security (WPA is preferred, it is stronger than the weak WEP).
    Quote Quote  



Similar Threads

Visit our sponsor! Try DVDFab and backup Blu-rays!