Hi,
So I just added a Samsung SH-S203N (SATA) drive to my box... It reads & rips fine, but every time I tried to burn a ISO file to a DVD, with DVD Decrypter (3.5.4, older free version), the drive just stops responding. The speed and write rate drop to zero, and the process status bar just stays where it's currently at. The program does not lock up and allows you to access it, but the burner just keeps spinning and spinning and spinning.... Even after closing DVD Decrypter.
After several tries I decided to send it back thinking it was defective. I got a new one and guess what? Well, I then checked the firmware and it already has the lastest version (SB01). Then a relative told me that DVD Decrypter might be "too old" for this new burner and to try NERO, which came only with the 2nd burner (go figure)... Nero burned about 5 DVDs with no problems, some even less than 5 min!
So I thought for sure my problem was solved, until I tried to play one. It played but was pretty glitchy... So, hoping that the maybe the ISO file was corrupt or something, I tried to burn a different ISO file to DVD with Nero and it F'n froze at 81%, just as it did with DVD Decrypter initially! Again, Nero didn't freeze, but the burner just stopped responding and the process bar stuck at 81% for 10 min, until I finally aborted!
PLEASE send any suggestions or thoughts b/c I am SO FRUSTRATED - I've never had a problem with burners! Always used NEC and have burned at least 250 DVDs, litterally... Not sure if this matters but, my system still has a NEC burner in it, but it's IDE connection... I just added this new SATA burner and it recognized it fine and set it to drive "H", after the NEC burner which is drive "F" ("G" is for a card reader in my printer).
Thanks so much in advance!!!
P.S. Not sure if it helps but here's the Nero burn log when it failed, even though it never actually gave me an error message before I aborted... 1 thing I noticed is that it has "IDE" listed as the adapter type for the Samsung SATA drive????
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.2
Internal Version: 7, 10, 1, 2
(Nero Express)
Recorder: <TSSTcorp CDDVDW SH-S203N>Version: SB01 - HA 1 TA 1 - 7.10.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC DVD_RW ND-3550A >Version: 1.05 - HA 1 TA 0 - 7.10.1.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD_RW ND-3550A atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3320620AS iaStor Port 2 ID 0 DMA: On
DiskPeripheral : ST3320620AS iaStor Port 2 ID 1 DMA: Off
CdRomPeripheral : TSSTcorp CDDVDW SH-S203N iaStor Port 2 ID 2 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-3550A F: CdRom0
TSSTcorp CDDVDW SH-S203N H: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2029MB (2078328kB)
Free physical memory: 1272MB (1303012kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.1.2008
Burn DVD Image
5:39:09 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
5:39:09 PM #2 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
5:39:09 PM #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2285846 (507:57.71, 4464MB)
5:39:09 PM #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
5:39:09 PM #5 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: TSSTcorp CDDVDW SH-S203N, Media type: DVD+R
Disc Manufacturer ID: MBIPG101, Media Type ID: R05, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 7
5:39:09 PM #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:39:09 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2285847 (2285847) = #2285847/507:57.72
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285847 blocks [H: TSSTcorp CDDVDW SH-S203N]
--------------------------------------------------------------
5:39:09 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [H: TSSTcorp CDDVDW SH-S203N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681414656, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2285847 | 2285847 | 0x00
2285847 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
5:39:09 PM #9 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
5:39:09 PM #10 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
5:39:09 PM #11 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
5:39:09 PM #12 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
5:39:09 PM #13 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
5:39:09 PM #14 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 20x (27,700 KB/s)
5:39:09 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
5:39:09 PM #16 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MBIPG101
Media type ID: R05
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8
23 54 37 13 02 50 6B 02 - 8C 63 15 15 0B 0B 08 08 #T7..Pk..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
5:39:09 PM #17 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MBIPG101
Media type ID: R05
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8
23 54 37 13 02 50 6B 02 - 8C 63 15 15 0B 0B 08 08 #T7..Pk..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
5:39:09 PM #18 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MBIPG101
Media type ID: R05
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8
23 54 37 13 02 50 6B 02 - 8C 63 15 15 0B 0B 08 08 #T7..Pk..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
5:39:09 PM #19 Text 0 File DVDR.cpp, Line 8376
Drive: TSSTcorp CDDVDW SH-S203N
Book Type request [TSST]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
5:39:09 PM #20 CDR -1207 File DVDR.cpp, Line 6481
Book Type automatically set to: DVD-ROM
5:39:09 PM #21 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes
5:39:09 PM #22 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
5:49:17 PM #23 Phase 40 File dlgbrnst.cpp, Line 1435
Aborted by user
5:53:28 PM #24 SPTI -1046 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x06
CDB Data: 0x5B 01 06 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 06
5:53:28 PM #25 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 1841472
5:53:28 PM #26 CDR -1046 File WriterStatus.cpp, Line 162
Illegal disc
H: TSSTcorp CDDVDW SH-S203N
5:53:28 PM #27 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
5:53:28 PM #28 Phase 39 File dlgbrnst.cpp, Line 1762
Burn process aborted
5:53:28 PM #29 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
5:54:05 PM #30 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
5:54:05 PM #31 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
--------------------------------------------------------------------------------
System Specs
OS:Windows XP
MB: Intel BOXDG965WHMKR LGA 775 Intel G965 Express ATX
VGA: EVGA 256-P2-N550 -T2 GeForce 7600GT 256MB 128-bit GDDR3 PCI
CPU: Intel Core 2 Duo E6600 Conroe 2.4GHz 4M shared L2 Cache LGA
Memory: (2X) Patriot 1GB 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Browser:IE
HD: (2x) Seagate Barracuda ST3320620AS (PRT) 320GB 7200 RPM 16MB
Sound: Creative Sound Blaster Live! 24 Bit
PSU: Ultra X2 550-Watt
Cooling: (2X) 120mm case Fans, stock CPU fan
Monitor: HP w2207 22" widescreen
Try StreamFab Downloader and download from Netflix, Amazon, Youtube! Or Try DVDFab and copy Blu-rays! or rip iTunes movies!
+ Reply to Thread
Results 1 to 30 of 85
Thread
-
-
try to get some better media. the Moser Baer India Limited isn't great and may not work in your drive. verbatim -r might give you an idea if the drive is going to work ok.
also imgburn is the successor to decrypter and you might want to try using it.--
"a lot of people are better dead" - prisoner KSC2-303 -
Thanks for the reply!
The media is Memorex 16X DVD+R, and I buy them by the hundreds and have only experienced maybe 2 or so coasters in about 250 burns with my NEC burner... I guess you could be write but I'd hate to change media just b/c of samsung being picky... Thing is, I didn't buy another NEC b/c I heard their quality has dropped... Boy, I hope all new burners aren't this picky and unreliable -
the bar can stop when the drive tries to re-write a bad sector and never succeeds. check over at cdfreaks i'm sure they have a thread about the 203 and what medium is working.
--
"a lot of people are better dead" - prisoner KSC2-303 -
1wheelken: What brand is your motherboard? Because some sata controller chipsets don't work correctly with SATA DVD Burners. Motherboards with the Intel ICH8/9 sata controllers work fine with SATA DVD Burners & NVIDIA sata controllers will work fine as long as you use the latest drivers. VIA chipset controllers won't work so you'll have to buy a SATA PCI CONTROLLER card w/the SILICON IMAGE 3112/3114 chipset for a SATA DVD Burners. Older motherboards w/SATA connections will have compatibility issues because they weren't equipped to be used for SATA DVD burners. Also check your motherboard BIOS to see if RAID is enabled, if it is then disable it.
The dvd media you're using is considered crappy. Use VERBATIM or TAIYO YUDEN dvd media. Burn dvd media with IMGBURN because DVD DECRYPTER is no longer updated. Both of those programs were made by the same guy named, LightningUK. NERO BURN is buggy as hell and not reliable as IMGBURN when it comes to burning dvd media. -
Thanks again for the reply!
My MOBO: Intel BOXDG965WHMKR LGA 775 Intel G965 Express ATX (http://www.newegg.com/Product/Product.asp?Item=N82E16813121052)
Since the last time it stopped responding, I was able to burn about 5 DVDs with NERO, however when I play them back on my home dvd player, they all skip a little way into each movie...
Then I tried to burn one at 8X... Less skips/glitches, but problems still there...
Next, I tried a verbatim 16X DVD+R (lightscribe) disc at MAX speed, and it caused the burner to stop responding as it has done before, only this time it froze my entire system! I couldn't even get into the task manager!! Man, this just keeps getting worse!!!!
2 things came to mind since my post... I thought maybe my home dvd player sucks so I put in a older dvd I burned with my NEC player about yr ago... It worked fine!
The other thing I thougt is that maybe it's some type of system problem... maybe lack of HD space for swap files? I have 2 320GB drives that I store ISO files on to burn... One has 10.8GB free and the other has 15.8GB free...Seems like enough free space but maybe not? The reason I thought this b/c my NEC just recently started to burn discs with glitches in them - I just thought it was finally goin bad so that why I bought the samsung... But now the samsung is "kinda" doin the same thing (when it actually completes a burn), so I don't know what to think!!!!! ERRRRRRRRRR! I never imagined this much trouble!!!
I'm starting to also wonder if the samsung just isn't all it's cracked up to be???
I'll try imgburn and see what happens with that... Thanks again! -
Don't be burning VERBATIM or any other dvd media at the MAX SPEED. Just because you have a 20x speed dvd burner doesn't mean you'll be successful with the disc playing back correctly. The best you can burn is at 12x speed or if you use MEDIA CODE SPEED EDIT to swap write strategies with other media id. As I mentioned you're using crappy ass MEMOREX dvd media. Stick to the VERBATIM dvd media and you won't have any problems as long as you burn them at 12x. In my experience I've burned 16x speed with VERBATIM & TAIYO YUDEN with my SAMSUNG SATA S203B drives but I use MEDIA CODE SPEED EDIT to change the write strategies for certain media id's.
Your motherboard should be fine but make sure RAID is disabled in your motherboard BIOS. This could also cause problems with dvd burning. Also make sure your SATA SAMSUNG Dvd burner is connected to the SATA port that has the INTEL ICH8 SATA controller. Your motherboard also has 3 additional SATA ports that are for RAID, which the dvd burner will not work correctly so if it's connected to it right now remove it and use the SATA connection that has ICH8.
I don't believe your hard drives could be the reason for your problems. Make sure when you're burning dvd discs that antivirus and any other programs running in the background are disabled. Don't even surf the net as well. SAMSUNG SATA DVD Burners are the best in the market at this time. -
Hello, I came across this thread after searching for answers on the exact same problem. I too have the SH-S203N, which will freeze at various points during a burn. I've been using Verbatim DVD+R media along with DVDFab 3.2.1.0, DVDFab 4.0.3.2, DVD Decryptor, DVD Shrink 3.2, and Nero 6 & 7.... all with the same problem. At first I thought this was a hardware defect, but now I think it's something to do with the SATA connection. I just switched from using an IDE (Samsung as well) DVD-RW to this new SATA.
Any advice on the problem would be great. The optical drive is connected to a Gigabyte P35-DS3P. I've tried the JMicron SATA port as well as the Gigabyte SATA on the board and come to the same problem with both. Currently AHCI is switched off, which I think could be the problem, but enabling it causes Windows to not load.
Thanks again -
Don't use the JMicron SATA port. Connect the drive to the SATA port that uses the INTEL SATA chipset controller. I see your GIGABYTE GA-EP35-DS3P motherboard has RAID SATA controllers as well which could make a SATA dvd burner not work correctly. Also disable RAID in the mobo BIOS as well. I believe the SATA ports on the GIGABYTE mobo's are different colors. On one of my GIGABYTE P35 mobos the PURPLE port is for RAID connections and the ORANGE port is where my SAMSUNG S230B drives are connected to which means they're using the INTEL chipset controllers. Also leave ACHI disabled as well. If you don't understand about the ACHI read your GIGABYTE manual.
Use IMGBURN to burn your dvd media. IMHO any other burning software is crappy. Good Luck! -
As nicely explained by budz, the sata controller is the biggest factor in this case.
Its more frickin than you might think, because there are many controllers onboard sold these days which are just useless for SATA ODD. They only work well for SATA HDD, not to mention RAID..........
If there is an option in the BIOS to set the controller to IDE or enhanced IDE, try that. RAID is a no-go with ODD.
There is also the possibility for some sata controllers to flash them with a BASE BIOS which has RAID disabled, they should work. -
Thanks again for the suggestions!
I have since been able to burn several DVDs with IMGBURN, but it seems that every 5 or so I have a burn that freezes half way, just as mentioned in my original problem... The completed burns actually play pretty well in one of my home DVD players, with only a few glitches... However, each one consistently skips near the beginning-middle of the movie in a different player I have at home... I'll admit this is the "pickier" of the 2 players, but then again it plays older DVDs I have burned just fine!
OK, now getting to your suggestions...
budz
Also make sure your SATA SAMSUNG Dvd burner is connected to the SATA port that has the INTEL ICH8 SATA controller. Your motherboard also has 3 additional SATA ports that are for RAID, which the dvd burner will not work correctly so if it's connected to it right now remove it and use the SATA connection that has ICH8.
I have 1 HD in SATA0, and 1 HD in SATA1... Originally I had the new burner plugged into the SATA3 port, but then changed it to the SATA2 port. I haven't really noticed a difference since then...
[_chef_]
If there is an option in the BIOS to set the controller to IDE or enhanced IDE, try that. RAID is a no-go with ODD.
Well, I really do appreciate all the help (and patience for my lack of knowledge)! I don't want to sound stubborn and I'm sure you gentlemen know a lot more about this than me but I just really hate to take a step "backward" in performance... If you know what I mean. See, I have been burning 4.7GB ISOs to Memorex DVDs with my 16X NEC burner, while surfing the net, printing labels for work, running AV, excel docs, etc, yet all those DVDs burned in about 6-7 mins with NO problems!
Maybe I have just been really lucky in the past, but I'd really just like to get at least that kind of performance back. In other words, I'm trying to avoid buying all new DVDs (at least for now), burning slower, and waiting twice as long... Thanks guyZ -
=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD_RW ND-3550A atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3320620AS iaStor Port 2 ID 0 DMA: On
DiskPeripheral : ST3320620AS iaStor Port 2 ID 1 DMA: Off
CdRomPeripheral : TSSTcorp CDDVDW SH-S203N iaStor Port 2 ID 2 DMA: Off
This piece of your Nero log seems to show DMA is off on the burner.
If you are burning without DMA it is quite easy to believe that when you reach higher transfer rates (outer areas of the DVD) the burn will crap out. Nero only uses a single core so you effectively have a slow system (2ghz), and no DMA. If any other program is using the same core the results will be even worse.
Fix the DMA problem by uninstalling and reinstalling the drivers. It seems to me that the fact that your burner is SATA is probably a red herring. DMA off is a classic and common problem which is normally easy to diagnose.
It also seems that your second Barrracuda is also running with DMA off. If you are burning from that drive your configuration is a disaster.
After you remedy this - learn to read the Nero log, its worth the effort.
In my experience Nero 7 issues a warning when DMA is off. Are you ignoring it? -
You are using MEMOREX dvd media which is considered crappy media. Use VERBATIM and TAIYO YUDEN and you'll see your problems disappear.
The SATA connection for your drive should be set in the BIOS to ide. ACHI should be disabled in your BIOS. The speed of your HD's should not be affected. I'll have to read this thread over as I'm at work right now on lunch hour. -
Originally Posted by budz
-
Originally Posted by oldandinthe way
If you've got nothing constructive to contribute to this thread then refrain from making comments. I have 4 SATA DVD Burners which were all installed on different brands of motherboards with different chipset controller so I think I have a good idea on how to assist the OP. -
Wow! I should have noticed that!
Nero did not show me any DMA warnings, and when the drive does work it's pretty fast so that's weird.... I have seen the DMA OFF warnings in the past when using DVDFab, and the speed difference was very noticable.
I'm honestly not sure how to get them into DMA mode I've done it thru the device manager b4, but now when I go under the "IDE ATA/ATAPI Controllers" section, it doesn't even show SATAs.... It shows the primary IDE and the secondary IDE... 1 device is in ultra DMA mode, but the other 3 show "not applicable"
I'd appreciate any guidence as to how to change this or uninstall/install the drivers! Should I just "update" the driver through windows or???? Can I even update the driver on the HD while it has items stored on it?
Thanks -
I've already explained about your mobo sata controller chipset. Did you DISABLE RAID in the mobo BIOS? Move your hard drives to another SATA PORT and then move your SATA DVD Burner to SATA port 1 or 2. See if that works or not. Until you're able to exhaust all the options that is the only way to know for sure if your SAMSUNG SATA drive is defective.
If you don't disable the RAID in the mobo bios then the drive will not work correctly. Also in the mobo BIOS make sure in the SATA ACHI mode you have it set to DISABLED & SATA PORT 0-3 Native mode set to DISABLED as well.
Also in mobo BIOS make sure the ONBOARD SATA/IDE CTRL (controller) MODE is set to IDE. Hopefully you'll have these things listed in your mobo BIOS! -
Nero shows DMA off because "iastor" driver is used, which's settings Nero cannot recognize correctly. If the driver is named "atapi", Nero should report the DMA mode correctly.
*** Now that you have read me, do some other things. *** -
OK, so I went in to the bios and changed from Raid to IDE... After it booted up, my computer caught on Fire!!!!!
So after my girlfriend's cousin's dog put the fire out, I got it to boot up and it looks great! The controllers now make sense in the device manager, with DMA on! Thanks budz and everyone else for the help! Also, I learned the difference in the media as you mentioned. I grab a couple TDKs, which I had success with in the past, from a friend and they burned great and worked in numerous players... a little slower than the Memorex, but the Memorex had consistent glitches mid-way in some DVD players.
I think I'm gonna grab some Verbatim from videohelp's sponsors... wouldn't make sense to buy'em anywhere else after such a good experience here. Thanks again guyz!!!
Here's my Nero Log - (Hoping there's nothing wrong ) I have been using Imageburn and it's great... just used Nero this time to check the DMA in the log...
oh and I may have exaggerated the fire part a lil...
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.2
Internal Version: 7, 10, 1, 2
(Nero Express)
Recorder: <TSSTcorp CDDVDW SH-S203N>Version: SB01 - HA 1 TA 1 - 7.10.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC DVD_RW ND-3550A >Version: 1.05 - HA 1 TA 0 - 7.10.1.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD_RW ND-3550A atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3320620AS atapi Port 2 ID 0 DMA: On
DiskPeripheral : ST3320620AS atapi Port 3 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CDDVDW SH-S203N atapi Port 4 ID 0 DMA: On
=== CDRom-Device-Map ===
_NEC DVD_RW ND-3550A F: CdRom0
TSSTcorp CDDVDW SH-S203N H: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2029MB (2078328kB)
Free physical memory: 1440MB (1475044kB)
Memory in use : 29 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.1.2008
Burn DVD Image
11:04:50 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
11:04:50 PM #2 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
11:04:50 PM #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2285849 (507:57.74, 4464MB)
11:04:50 PM #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
11:04:50 PM #5 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: TSSTcorp CDDVDW SH-S203N, Media type: DVD+R
Disc Manufacturer ID: MBIPG101, Media Type ID: R05, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 7
11:04:50 PM #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:04:50 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2285850 (2285850) = #2285850/507:58.0
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285850 blocks [H: TSSTcorp CDDVDW SH-S203N]
--------------------------------------------------------------
11:04:50 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [H: TSSTcorp CDDVDW SH-S203N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681420800, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2285850 | 2285850 | 0x00
2285850 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
11:04:50 PM #9 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
11:04:50 PM #10 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
11:04:50 PM #11 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
11:04:50 PM #12 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
11:04:50 PM #13 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
11:04:50 PM #14 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 20x (27,700 KB/s)
11:04:50 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
11:04:50 PM #16 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MBIPG101
Media type ID: R05
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8
23 54 37 13 02 50 6B 02 - 8C 63 15 15 0B 0B 08 08 #T7..Pk..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
11:04:50 PM #17 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MBIPG101
Media type ID: R05
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8
23 54 37 13 02 50 6B 02 - 8C 63 15 15 0B 0B 08 08 #T7..Pk..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
11:04:50 PM #18 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MBIPG101
Media type ID: R05
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8
23 54 37 13 02 50 6B 02 - 8C 63 15 15 0B 0B 08 08 #T7..Pk..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
11:04:50 PM #19 Text 0 File DVDR.cpp, Line 8376
Drive: TSSTcorp CDDVDW SH-S203N
Book Type request [TSST]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
11:04:50 PM #20 CDR -1207 File DVDR.cpp, Line 6481
Book Type automatically set to: DVD-ROM
11:04:50 PM #21 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes
11:04:50 PM #22 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
11:09:13 PM #23 Text 0 File WriterStatus.cpp, Line 113
<H: TSSTcorp CDDVDW SH-S203N> start writing Lead-Out at LBA 2285850 (22E11Ah), length 0 blocks
11:09:46 PM #24 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 2285856
11:09:46 PM #25 Phase 37 File dlgbrnst.cpp, Line 1762
Burn process completed successfully at 20x (27,700 KB/s)
11:09:47 PM #26 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
11:09:51 PM #27 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
11:09:51 PM #28 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) -
OK, so I went in to the bios and changed from Raid to IDE... After it booted up, my computer caught on Fire!!!!! So after my girlfriend's cousin's dog put the fire out, I got it to boot up and it looks great!
Glad to hear you got the drive working correctly. Happy dvd burning from now on with VERBATIM dvd media! -
As a note, I would only burn that specific media at 16x max.
*** Now that you have read me, do some other things. *** -
OK, I just don't get it.... I have since burned about a dozen perfect DVDs with the TDKs...
Then, last night I tired to burn a TDK DVD and the burner again stop responding at about 68% while using Imageburn. Like before, I was able to close Imageburn but the burner kept spinning and wouldn't respond to anything or open until I rebooted... The only thing that was different this time was the color of actual DVD... Meaning, the first dozen or so TDKs given to me were plain white printables, while this recent burn used the same TDK DVD ( CMC MAG-M01), however the top is a gray color with writing on it.
OK so I then rebooted and burned a DVD successfully, however it took about 8-9 minutes. Also, the Imageburn log showed 2 instances where the buffer had to recover, which I have Never seen before! I then burned another and it took even longer, and had 3 buffer errors/recoveries
I'm waiting on Verbatims but I'm still not convinced this burner is not going to make coasters for them as well! I have a some Verbatim Lightscribes but I don't really want to waste thoughs either...
Could the DVD color "really" make a difference, even though the media ID is identical?
I'll post the log when I get home... If I don't throw my computer out the window 1st... -
TDK should be avoided these days, they have gone done the drain like Memorex..............
*** Now that you have read me, do some other things. *** -
OK, now I'm really pissed... My Verbatims arrived today, and guess what?
Yup, 1st try and it stopped responding AGAIN!!!!!!!!!!!!!!!!!!!!!!!!! It actually made it all the way to 100% and showed "finished", but it just stuck there (sychronizing cache), and so I had to reboot....
After reboot, I tried again. Well, it worked this time but barely made it over 4X????? WTF?
Please, somebody, please???? -
did you ever try removing the drive and connecting it to another SATA port? try doing that.
-
i would swap out the drive with another. i have three of those drives in three different systems. they are all plugged in to different contrllers and all work flawlessly with verbatim. i consider the samsung one of my best drives.
maybe you got a defect---it happens.... -
OK, so I've been burning like crazy trying to figure this out... I moved the drive to another sata port, but unfortunately that made no difference.
I have been able to burn a couple here and there but eventually it stops responding... One of the things I noticed was that when I opened IE while burning, the buffers where shot down and then it would crash or the speed never went back up above 4X on the samsung sata drive, however when I did the same thing while burning with the nec IDE drive, it barely noticed it...
The only way I have been gettinig semi-consistant burns with the samsung sata is by limiting the speed to 16X, using Verbatims, and also being sure not to use any other programs during the burn...
Is the IDE port somehow not affected by other tasks/programs that are running on the SATA hard drives, and therefore allowing that burner to run "unaffected"? I pretty much Always did other things while burning so I'm kinda spoiled... In other words, should I just buy another IDE burner so I can get away with more???? -
Originally Posted by 1wheelken
-
Originally Posted by 1wheelken
Similar Threads
-
Help Upgrading Firmware for Samsung SH-S203N
By mn072065 in forum DVD & Blu-ray WritersReplies: 14Last Post: 8th Jul 2008, 05:50 -
can't burn with sata dvd burner
By Shotobits in forum Newbie / General discussionsReplies: 3Last Post: 14th May 2008, 14:53 -
unreadable burns with Verbatims and Liteon SATA DVD drive
By eternity3 in forum DVD & Blu-ray WritersReplies: 3Last Post: 14th Dec 2007, 03:10 -
Questions about Samsung SH-203 SATA DVD burner
By Phantom Of The Opera in forum DVD & Blu-ray WritersReplies: 5Last Post: 21st Nov 2007, 21:07 -
advice on an SATA dvd burner?
By lumis in forum ComputerReplies: 4Last Post: 19th Jun 2007, 04:09