Denon DHT m330DV Multi-region

[Alex_Ned]

I've bought a Denon DHT m330DV with region code 2. Now I want a Multi-region. I tried to use Region code which is posted on your site but no sucсess. Cuold you send me correct values for 12 XX, 13 XX and 14 XX to make dvd region free.
Thanks in advance.

[KBeee]

Did you make sure you tried the PAL hack?

[KBeee]

Region Free for an PAL TV
1. Turn the unit on.
2. Press the “OPEN/CLOSE” button and open the tray.
(Keep the tray open during the setting.)
3. Press “CLEAR” “1” “4” “7” “0” “CLEAR” - “TEST MODE” will appear on the display.
4. Press the “▲”cursor key and “00 XX” (XX=this will be a numerical value) will appear on the display. The first two digits are incremented by one, every time you
press “▲”
5. Press the “▲”cursor key until you see 12 XX (default is 24) on the display. Press “3” "3” on the remote then the “ENTER” button
6. Press the “▲” cursor key again and you will see 13 XX (default is 23). If it does not say “33”, Press “3” “3” on the remote and then the “ENTER”
button
7. Press the “▲” cursor key again and you will see 14 XX default is 01). Press “0” “0” on the remote and then the “ENTER” button.
8. Press “RETURN”
9. Press “CLEAR” twice
10. Press “RETURN” (END should appear on the display)
11. Press the “OPEN/CLOSE” button to close the tray.