VideoHelp Forum
+ Reply to Thread
Results 1 to 3 of 3
Thread
  1. Member
    Join Date
    Nov 2006
    Location
    Finland
    Search Comp PM
    Hi!

    I bought about year ago this JVC DR-M1SLE DVD-recorder (it was very expensive back then) and now it has problem, when AC plug is connected it starts up inmediately blinking 'LOADING' text and nothing happens.

    I saw topic about DR-M10 loading problems because of few faulty resistors/capacitors and i decided to see whats inside my player.

    I Found one CapXon 2200uF/10V capacitor whitch was bulged slightly so i swapped it to new one but LOADING is still tehere.

    Should i change all filter caps from power board?


    Here is pic of the power board, i replaced that bulged cap with that enermous 3300uF/50V (green cap is replacing other CapXon 2200uF/10V for a test)

    Quote Quote  
  2. You can't exchange a 3300 for a 2200, if that's what you did. You can exchange a 50 volt for a 10 volt, but the uf has to stay the same.
    Quote Quote  
  3. Member
    Join Date
    Nov 2006
    Location
    Finland
    Search Comp PM
    That 50V cap was only i had.

    Have to try swapping all of those filter caps (going to buy new ones next week)

    Edit:

    In fact, i have repaired many PC motherboards and replaced bulged caps sometimes with much grater uf and they work just fine
    Quote Quote  



Similar Threads

Visit our sponsor! Try DVDFab and backup Blu-rays!