I have an SVCD version of Shrek on 2 discs.
I have friends who can't play SVCD so I wanted to convert it to VCD. As the file was just under 83 mins if I cut it, I had worked out if I reduced the audio to 160kbps it would fit on an 80 min CD.
I copied the 800 Mpeg file from the first disc to my hard drive.
I then tried adding it to TMPGEnc for conversion but the program locked up? (I have a Duron 800 with 256 MB)
I tried VCD gear as I understand the Mpeg file is like a dat file on a VCD. I have an error on the mpeg which if I set to correct with VCD gear I just got a totally corrupted file? If I left the correction off the file converted and played fine. I then added this file which would also lock up but I found after many attempts that if I left the computer it would un-freeze and add the file.
Then TMPGEnc did not add the audio? I had to de-multiplex the audio and then add it! I set it going and when it got to the error in the Mpeg it failed!!. The error was not bad with a only a bit of blocking. As VCD Gear and the newer GUI? would not fix the errors (are they only meant for VCD?) I ended up de-multiplexing the mpeg into audio/video and converting the mp2 file to 160kbps Mp3 and then using TMPGEnc. After lots of attempts I finally got the first Mpeg to convert!!.
The Second Mpeg!
I have even more problems with the second disc!! I had and error which was worse!. I had the same problems as before but it would not convert past the error. I ended up cutting the end (It did not cut the audio?) and then cutting the audio mp3 at the same point before adding to TMPG before conversion! I then joined the 2 files (with about 2 seconds cut out) together with VCD cutter. I then added the two files left together to get the whole file as one Mpeg file of just under 800 mb!
I then used VCD Easy to make chapters every five mins and burn to make a VCD!!!. It worked!
It has taken me about a week (I was off work until Thursday!) to get it all converted but I think is looks good (apart from the 2 second cut)
Questions?
1. Why does TMPGEnc have so many problems with Mpeg 2 files?
2. Is there another program like VCD gear that will correct the Mpeg errors?
3. Is there a better way to covert SVCD (but not to AVI as its just to big a file!)
If I new when I started I would have just ripped the DVD!.
Has anyone got anything to add?
+ Reply to Thread
Results 1 to 5 of 5
-
-
try using dvd2avi to open the mpeg2 file. select save project to frame save, and then use d2v and wav file to encode to vcd.
-
If I have an 800 mb Mpeg 2 file is the AVI file not going to be huge?
-
dvd2avi wont convert the mpeg2 to avi. http://www.vcdhelp.com/mpeg2tovcd.com
Similar Threads
-
VCD to DVD (not SVCD)
By noyou in forum SVCD2DVD & VOB2MPGReplies: 20Last Post: 19th May 2009, 16:56 -
Beeping on vcd/svcd
By mgdt in forum Newbie / General discussionsReplies: 5Last Post: 20th Dec 2007, 10:56 -
Problems with a VCD? A somwehat odd way of converting VCD to DVD
By dvd3500 in forum Video ConversionReplies: 2Last Post: 19th Oct 2007, 06:54 -
avi to vcd/svcd
By neynme in forum DVD RippingReplies: 7Last Post: 26th Aug 2007, 20:25 -
How to copy-protect a VCD/SVCD v2.0
By Sine29 in forum User guidesReplies: 23Last Post: 20th Jul 2007, 10:27