VideoHelp Forum




+ Reply to Thread
Results 1 to 4 of 4
  1. Member
    Join Date
    Aug 2006
    Location
    Netherlands
    Search Comp PM
    hello,
    who can help me make my bose gsx regin free, ore at least tel me
    how i can figure out what firmeware my systhem has
    best regards
    roy heffels
    Quote Quote  
  2. Member
    Join Date
    Mar 2004
    Location
    Eastern Shore
    Search PM
    First off, your best bet is to get rid of the Bose, you can get a lot better for less money.

    They, look through here for a good region free dvd player. You'll have regioni free then and for a lot less money and it will sound a lot better too.

    Good luck with it all.
    Quote Quote  
  3. Член BJ_M's Avatar
    Join Date
    Jul 2002
    Location
    Canada
    Search Comp PM
    http://www.smartgroups.com/group/group.cfm?GID=3467186


    has the region free codes and how to do it
    "Each problem that I solved became a rule which served afterwards to solve other problems." - Rene Descartes (1596-1650)
    Quote Quote  
  4. Член BJ_M's Avatar
    Join Date
    Jul 2002
    Location
    Canada
    Search Comp PM
    321II, 321GSII & 321 GSX firmware display inforamtion procedure

    Viewed on 321II & 321GSII console displays Steps 1 - 14
    Viewed on 321 GSX console displays Steps 1 - 18

    Obtaining System Information from the Media Center Display

    You can obtain system information directly from the media center display by pressing
    a few buttons. Follow the steps below.

    - With the media center off, press and hold the ENTER/STORE button on the media
    center. When holding down the ENTER/STORE button, pressing the ON/OFF button will
    bring up the console system information on the console display.
    - For each additional press of the ON/OFF button, you will get additional
    information. See the list below.
    - Once you are done viewing the information, press the POWER button.


    01 - Video output : (NTSC Progressive -> NTSC Component -> NTSC Composite+S ->
    *MULTI Progressive -> *MULTI Component -> *MULTI Composite+S ->
    *PAL Progressive -> PAL Composite+S -> PAL Component)
    [use the volume buttons to cycle through options]

    * Added by Extensions Firmware Upgrade

    02 - Flash Commit [press volume up to reboot]

    03 - Console Software: (version)

    04 - Console Variant: (#)

    05 - Bass Box Software: (version)

    06 - Tuner Sofware: (version)

    07 - Console serial number: (s/n)

    08 - Main Board serial number: (s/n)

    09 - Tuner serial number: (s/n)

    10 - DVD Region Code: (#)

    11 - DVD Drive: (firmware version on first line)
    (DVD model number on second line)

    12 - Main Board Functional: (test results)

    13 - Tuner Board Alignment: (test results)

    14 - Serial Port: (Smart Speaker -> ETAP)
    [use the volume buttons to cycle through options]

    15 - Hard Drive: (firmware version on first line)
    (DVD model number on second line)

    16 - Hard Drive Self Test: (test results)

    17 - Gracenote Databese: (version)

    18 - Eithernet Address: (Address)
    "Each problem that I solved became a rule which served afterwards to solve other problems." - Rene Descartes (1596-1650)
    Quote Quote  



Similar Threads

Visit our sponsor! Try DVDFab and backup Blu-rays!