VideoHelp Forum




+ Reply to Thread
Results 1 to 4 of 4
  1. Member
    Join Date
    Nov 2005
    Location
    South Africa
    Search Comp PM
    I am trying to capture from VHS-VCR to PC. I get a thickish single line down the far left of the capture preview screen.

    - Tried either Dazzle DVC90 USB and also 1394 port using Sony camcorder as passthrough.
    - When using 1394... the picture is fine on the camcorder then same problem at the PC
    - Tried Pinnacle-studio Ulead and McFunsoft
    - All updates and drivers OK on PC (2.4Ghz/512mb/120gb)
    - Tried on a dual boot separate disk
    - Swapped cables, VCRs
    - Tried another PC in another room
    - Example attached

    It was working fine 3 weeks ago and it suddenly does this.

    Any clues?

    David

    Hi from Johannesburg, South Africa

    uvs060512-001.jpg
    Quote Quote  
  2. Member
    Join Date
    Mar 2004
    Location
    Boise, ID
    Search Comp PM
    I'm thinking it's either the VHS tape, or the tracking. Have you tried other tapes to see if anything changes? Have you tried cleaning the heads/capstans to see if that helps... Tried adjusting the tracking.
    Rob
    Quote Quote  
  3. Member
    Join Date
    Nov 2005
    Location
    South Africa
    Search Comp PM
    Thanks.

    I've tried 2 VCR machines (1 brand new) and loads of different tapes........
    Quote Quote  
  4. Member
    Join Date
    Nov 2005
    Location
    South Africa
    Search Comp PM
    p.s. yes thanks I have played with the tracking
    Quote Quote  



Similar Threads

Visit our sponsor! Try DVDFab and backup Blu-rays!