There are books, magazines, and websites that show you how.Originally Posted by smearbrick1
Then they are probably too lazy to get on the net or go to the store to get one in the first place.Originally Posted by smearbrick1
Originally Posted by smearbrick1
They would be unable to use their hands and fingers to begin with since they are paralyzed. They would not be able to use a computer, thus making this a moot question.
+ Reply to Thread
Results 181 to 210 of 234
-
Believing yourself to be secure only takes one cracker to dispel your belief.
-
Originally Posted by smearbrick1
There are also nice and easy instructions these days for building a PC. It's not so hard anymore, but even still you can get someone to build the PC for you (IE: a friend, or relative) and all the equipment has it's own warranty and/or support. They don't need to call you. Someone calls me and says, "My video card isn't working." I tell them to call ATI, or whomever and they'll get you running or send an RMA. Most of the time the problem is fixed over the phone in 5-10 minutes. Call me and we gotta work out a scheduled time for me to come over. I gotta spend 5-10 min. trying to get into the mode of mind to understand what the heck is going on, then troubleshoot with something I may not have ever come in contact with before. After 3 hours they have their computer fixed, but it took 4 days before I could come over. -
Originally Posted by Dv8ted2
Originally Posted by smearbrick1
Originally Posted by smearbrick1
whatever gives you that idea?you don't need hands and fingers to use a PC and while helping others I've come across a few people on the net who have special setups to suit their disabilities 8)
-
MX, see your pm.
Believing yourself to be secure only takes one cracker to dispel your belief. -
Originally Posted by MackemX
Originally Posted by MackemX
Originally Posted by MackemXBelieving yourself to be secure only takes one cracker to dispel your belief. -
Originally Posted by Dv8ted2
Check out the cost for these though. You're not gonna find a prebuild at Wal-Mart, nor will they be able to do a homeubilt. They are gonna have to call a manufacturer and have some specialty devices installed on it. It isn't gonna be for <$800 either. -
I did see it and being paralyzed doesn't mean you can't use a PC. I had this guy in mind when I wrote my reply and it didn't take long to find him
take a look at wheelie4's post here
http://forum.dvdrbase.info/showthread.php?p=196133#196133
Originally Posted by Wheelie4
p.s. pretty cool as I'm still a Super Moderator over at DVDRBase, guess I will pop over there a little more to boost my poster powers :P -
Originally Posted by MackemX
-
Originally Posted by Doramius
wouldn't the default Microsoft onscreen keyboard eliminate the need for a keyboard? (I use it sometimes when I'm too lazy to either pickup or find the keyboard). All you would then need is a mouse input device so I'd reckon you could use a pre-build from Walmart with a special wand or joystick that has the drivers/software with it
I'll admit I was being picky but it's just I was aware that disabled people can still use a PC as long as they have extra hardware/software whereas some people aren't -
True. I know disabled people that use PCs too. But I also know the cost of their equipment. The onscreen keyboard still requires the use of a mouse. someone with only one arm might fint that fine, but a quaddie is gonna find it a bit difficult. The puff & sip style mouse is the most commonly used and isn't too expensive, but many even come with voice dictation software. You might find some cheap ones about $250-$300.
-
Originally Posted by Doramius
. We are now talking about extra hardware in the sense that you use a printer/scanner etc and that has nothing to do with whether the guy should buy computer A or computer B
-
Then a HomeBuilt PC put together by your friend or relative is still gonna be better than buying one at the store.
-
Originally Posted by Doramius
. Another factor is that some people may be able to build PC's but some may not be good at picking spec and buy spec that is mismatched. Like I said these days, I just ask the budget and main PC requirements and then point people to a good store that do custom builds
if you shop around you can get some good pre-builds these days that are very competitive to custom builds due to the fact the pre-builds are sold with a small profit margin. Bujying many parts individually means that all the small profit margins will add up. I guess you do get bad pre-builds that are over priced but that's all down to research and many people are just simply too lazy to shop around
-
mackemsxx's "home built" system = phase 4
it is true though -- that if you shop around carefully , even if you plan on upgrading ... you can find some real bargains .... guys like tigerdirect, dell etc buy at much lower price points than we can ..."Each problem that I solved became a rule which served afterwards to solve other problems." - Rene Descartes (1596-1650) -
Originally Posted by BJ_M
.
I've had some crap in recent weeks with it and bits are everywhere as I get sick of rebuilding it. If I had a camera to show you a picture then you would piss yourself laughing at the state it's in but it works 8). The only thing fastened into my Aluminium Lian Li case (I've forgotten the last time I had the sides or front on so I don't know why I paid £100 for the damn case) is the motherboard. The power supply is there but not screwed in. The DVD burner, hard drives (though in a frame) are just resting on the floor & case and the floppy has been missing since 2003. I've also got a 3" fan sitting on the bottom of the case pointing up as my graphics fan crapped out just last week and I didn't have a replacement
My PC is in the cupboard under the stairs and I've always wanted to build it into a custom setup rather than stick everything into a case but I've never got round to it. I've seen some pretty cool setups where people have put their PC's into furniture etc -
i suggest this one
though this one is pretty strange ... http://www011.upp.so-net.ne.jp/kat2/pc/ern005/ekana.htm
but this one has some of the nicest work http://www.bit-tech.net/modding/2005/10/19/wmd_g-gnome/1.html
"Each problem that I solved became a rule which served afterwards to solve other problems." - Rene Descartes (1596-1650) -
Annoyance:
People who refuse to accept a better way of doing something and continue to use their tired and inefficient procedure. -
Originally Posted by smearbrick1
https://forum.videohelp.com/viewtopic.php?p=1497381#1497381 -
Annoyance:
Build a fountain or a pond and people will throw money in it.
Not really an annoyance, just an oddity. -
I have a thought about that.
Go to Wal-Mart, buy a $14 kiddie pool. Build a small assembly that looks like a well. Put a fence around it and take it to carnivals and other various places. Chuck a small handfull of nikels & pennies into it and people will catch onto the idea. Don't even need a sign. Just let people throw money into it.
I've also wanted to scale the side of the Grand Canyon at heavily visited spots, and similar at other tourist areas. Heck, free money. No sense in letting it go to waste. -
At my mother-in-law's small business, they have (own) a fountain in front. They routinely rake in $80-$100 a day in coins. They could basically hire another person on the fountain intake alone.
-
I thought of building one of those fish ponds in my front yard and letting the neighbors pitch coins into it.
-
i would rather just pitch some of my neighbours into it
"Each problem that I solved became a rule which served afterwards to solve other problems." - Rene Descartes (1596-1650) -
who says there is water in it ?
"Each problem that I solved became a rule which served afterwards to solve other problems." - Rene Descartes (1596-1650) -
Originally Posted by BJ_M
-
Originally Posted by BJ_M
Think man.
-
Anyone remember old push mowers (the ones with the engine)? My parents had this huge hulking beast of a push mower when I was a kid. It had no safety bar and no discharge guard (nice). I also remember it had this little patch of what looked like sandpaper on top of the deck where you were supposed to place your foot while starting. There was no button underneath it, the choke was on the handrail, and there was no mechanics tied to this little spot of sandpaper. For some reason, if you didn't have your foot directly on that piece of sandpaper when attempting to start the beast, it wouldn't start.
Sorry if this makes no sense. Just another random thought.
Similar Threads
-
Building a new PC - This is annoying
By Des in forum ComputerReplies: 5Last Post: 9th Jul 2010, 16:54 -
Isn't this annoying?
By Midzuki in forum FeedbackReplies: 17Last Post: 4th Feb 2008, 12:34 -
The Most annoying Celebrity
By Cirone in forum Off topicReplies: 22Last Post: 4th Feb 2008, 12:32 -
[color=red]Huge annoying title[/color]
By JohnnyMalaria in forum TestReplies: 1Last Post: 1st Feb 2008, 10:47 -
Annoying error i keep getting...
By SE14man in forum Newbie / General discussionsReplies: 5Last Post: 1st Jan 2008, 03:33