VideoHelp Forum

Our website is made possible by displaying online advertisements to our visitors. Consider supporting us by disable your adblocker or Try ConvertXtoDVD and convert all your movies to DVD. Free trial ! :)
+ Reply to Thread
Results 1 to 9 of 9
Thread
  1. Hi,

    I am converting the following file to a svcd

    Video : XVID 624x352 12bpp 23.976
    fps 1024.6kbps (125.1 kbyte/s)
    audiocodec: framecopy (format=55 chans=2 rate48000 bits=0 B/s=13524 sample-0)

    I open the source file and choose the "save as" making sure there are no spaces or unusual characters. I choose the SVCD mpeg2enc to encode the files as i need to add subtittles. I choose "Decode with mplayer" I have checked the file plays ok and when i use the preview everything looks ok. The encoding goes fine until the very end when it says failed in red. Below is a copy of the information. The only error i can see is at the bottom which is

    ERROR: could not stat() file `/Volumes/Stuff/Movies/Lost/Lost13/lost113:': No such file or directory

    I can then burn the files using the .toc in missing media burner as I couldn`t figure out if it was possible using ffmpegX, it all seams to work fine but I would like to find out what the error means so that I can rectify it as the mentioned directory does exist. Your help is much appreciated.

    Thanks in advance,
    Mal.

    Encoding started on Mon Dec 26 16:36:00 JST 2005
    INFO: [yuvscaler] yuvscaler (version 1.7.0) is a general scaling utility for yuv frames
    /Volumes/Stuff/Movies/Lost/Lost13/lost113/
    -f 5 -b 2500 -q 6 -B 260 -V 230 -a 2
    -F 1
    INFO: [yuvscaler] (C) 2001-2002 Xavier Biquard <xbiquard@free.fr>
    INFO: [yuvscaler] yuvscaler -h for help, or man yuvscaler
    MPlayer dev-CVS-051126-18:35-3.3 (C) 2000-2005 MPlayer Team
    Mac OSX static build for ffmpegX
    AltiVec found
    CPU: PowerPC
    Using Unoptimized OnScreenDisplay
    Using Darwin accurate timing
    Terminal type `unknown' is not defined.
    get_path('input.conf') -> '/Users/Mal/.mplayer/input.conf'
    Can't open input config file /Users/Mal/.mplayer/input.conf: No such file or directory
    Can't open input config file /usr/local/etc/mplayer/input.conf: No such file or directory
    Falling back on default (hardcoded) input config
    get_path('LostS01x03.avi.conf') -> '/Users/Mal/.mplayer/LostS01x03.avi.conf'
    tS01x03.avi.
    get_path('sub/') -> '/Users/Mal/.mplayer/sub/'
    [file] File size is 365580288 bytes
    STREAM: [file] /Volumes/Stuff/Movies/LostSeason1/LostS01x03.avi
    STREAM: Description: File
    STREAM: Author: Albeu
    STREAM: Comment: based on the code from ??? (probably Arpi)
    AVI file format detected.
    list_end=0x2292
    ======= AVI Header =======
    us/frame: 41708 (fps=23.976)
    max bytes/sec: 0
    padding: 0
    MainAVIHeader.dwFlags: (272) HAS_INDEX IS_INTERLEAVED
    frames total: 61210 initial: 0
    streams: 2
    Suggested BufferSize: 0
    Size: 624 x 352
    ==========================
    list_end=0x10F4
    ==> Found video stream: 0
    ====== STREAM Header =====
    Type: sdiv FCC: divx (64697678)
    Flags: 0
    Priority: 0 Language: 0
    InitialFrames: 0
    Rate: 24000/1001 = 23.976
    Start: 0 Len: 61210
    Suggested BufferSize: 80610
    Quality 10000
    Sample size: 0
    ==========================
    Found 'bih', 40 bytes of 40
    ======= VIDEO Format ======
    biSize 40
    biWidth 624
    biHeight 352
    biPlanes 1
    biBitCount 12
    biCompression 1145656920='DIVX'
    biSizeImage 1317888
    ===========================
    Regenerating keyframe table for MPEG4 video
    list_end=0x2186
    ==> Found audio stream: 1
    ====== STREAM Header =====
    Type: sdua FCC: (0)
    Flags: 0
    Priority: 0 Language: 0
    InitialFrames: 1
    Rate: 48000/1152 = 41.667
    Start: 0 Len: 106372
    Suggested BufferSize: 672
    Quality -1
    Sample size: 0
    ==========================
    Found 'wf', 30 bytes of 18
    ======= WAVE Format =======
    Format Tag: 85 (0x55)
    Channels: 2
    Samplerate: 48000
    avg byte/sec: 13524
    Block align: 1152
    bits/sample: 0
    cbSize: 12
    mp3.wID=256
    mp3.fdwFlags=0x2000000
    mp3.nBlockSize=17409
    mp3.nFramesPerBlock=256
    mp3.nCodecDelay=0
    ===========================
    list_end=0x2292
    AVI: dmlh found (size=248) (total_frames=61210)
    list_end=0x22B6
    hdr=Software size=15
    Software : Nandub v1.0rc2
    list_end=0x15A161CA
    Found movie at 0x280C - 0x15A161CA
    Reading INDEX block, 167582 chunks for 61210 frames (fpos=0x0)
    AVI index offset: 0x2808 (movi=0x280C idx0=0x4 idx1=0x18C)
    Auto-selected AVI audio ID = 1
    Auto-selected AVI video ID = 0
    AVI: Searching for audio stream (id:1)
    AVI video size=326989014 (61210) audio size=34527312 (106372)
    VIDEO: [XVID] 624x352 12bpp 23.976 fps 1024.6 kbps (125.1 kbyte/s)
    [V] filefmt:3 fourcc:0x44495658 size:624x352 fps:23.98 ftime:=0.0417
    Clip info:
    Software: Nandub v1.0rc2
    SUB: Detected subtitle file format: subviewer
    SUB: opened iconv descriptor.
    SUB: closed iconv descriptor.
    SUB: Read 483 subtitles.
    SUB: added subtitle file (1): /Volumes/Stuff/Movies/Lostsubs/Lost1x03.srt
    get_path('sub/') -> '/Users/Mal/.mplayer/sub/'
    ================================================== ========================
    Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
    dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer.
    mp3lib: using generic C decore!
    MP3lib: init layer2&3 finished, tables done
    MPEG 1.0, Layer III, 48000 Hz 128 kbit Joint-Stereo, BPF: 384
    Channels: 2, copyright: No, original: Yes, CRC: No, emphasis: 0
    AUDIO: 48000 Hz, 2 ch, s16be, 128.0 kbit/8.33% (ratio: 16000->192000)
    Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
    ================================================== ========================
    Using (default) progressive frame mode.============================================= =============================
    Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
    INFO: libavcodec init OK!
    Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
    ================================================== ========================
    INFO: [yuvscaler] SVCD output format requested in NTSC norm
    /2ch/s16be -> 0Hz/0ch/s8...
    [libaf] Adding filter dummy
    [dummy] Was reinitialized: 48000Hz/2ch/s16be
    [dummy] Was reinitialized: 48000Hz/2ch/s16be
    [AO PCM] File: audiodump.wav (WAVE)
    PCM: Samplerate: 48000Hz Channels: Stereo Format s16le
    [AO PCM] Info: Faster dumping is achieved with -vc null -vo null
    PCM: Info: to write WAVE files use -ao pcm:waveheader (default).
    AO: [pcm] 48000Hz 2ch s16le (2 bytes per sample)
    AO: Description: RAW PCM/WAVE file writer audio output
    AO: Author: Atmosfear
    INFO: [yuvscaler] input: frame size: 624x352 pixels (329472 bytes)
    INFO: [yuvscaler] input: frame rate: 2997003/125000 fps (~23.976024)
    INFO: [yuvscaler] input: interlace: none/progressive
    INFO: [yuvscaler] input: sample aspect ratio: ?
    INFO: [yuvscaler] from 624x352, take 624x352+0+0, NOT_INTERLACED/PROGRESSIVE
    INFO: [yuvscaler] scale to 480x360, 480x480 being displayed, NOT_INTERLACED/PROGRESSIVE
    INFO: [yuvscaler] Scaling uses the BICUBIC algorithm,
    ilter chain for 48000Hz/2ch/s16be -> 48000Hz/2ch/s16le...
    [dummy] Was reinitialized: 48000Hz/2ch/s16be
    [libaf] Adding filter format
    [format] Changing sample format from big-endian 16-bit signed int to little-endian 16-bit signed int
    [format] Accelerated endianess conversion only
    [dummy] Was reinitialized: 48000Hz/2ch/s16be
    [format] Changing sample format from big-endian 16-bit signed int to little-endian 16-bit signed int
    [format] Accelerated endianess conversion only
    Starting playback...
    ] without line switching
    INFO: [yuvscaler] without time forwarding
    INFO: [yuvscaler] Without luminance correction
    INFO: [yuvscaler] Without chrominance correction
    INFO: [yuvscaler] black lines: 60 above and 60 under
    INFO: [yuvscaler] black columns: 0 left and 0 right
    INFO: [yuvscaler] frame rate: 23.976 fps
    INFO: [yuvscaler] Scaling ratio for width is 13 to 10
    INFO: [yuvscaler] and is 44 to 45 for height
    ating memory in module format, old len = 0, new len = 65540
    [ffmpeg] aspect_ratio: 1.772727
    VDec: vo config request - 624 x 352 (preferred colorspace: Planar YV12)
    Trying filter chain: vo
    VDec: using Planar YV12 as output csp (no 0)
    Movie-Aspect is 1.77:1 - prescaling to correct movie aspect.
    VO Config (624x352->624x352,flags=0,'MPlayer',0x32315659)
    VO: [yuv4mpeg] 624x352 => 624x352 Planar YV12
    VO: Description: yuv4mpeg output for mjpegtools
    VO: Author: Robert Kesterson <robertk@robertk.com>
    INFO: [mpeg2enc] Selecting SVCD output profile
    ocating (slices) mp_image_t, 624x352x12bpp YUV planar, 329472 bytes
    ++ WARN: [mpeg2enc] Generating dummy SVCD scan-data offsets to be filled in by "vcdimager"
    INFO: [mpeg2enc] Encoding MPEG-2 video to /Volumes/Stuff/Movies/Lost/Lost13/lost113.mpv
    INFO: [mpeg2enc] Horizontal size: 480 pel
    INFO: [mpeg2enc] Vertical size: 480 pel
    INFO: [mpeg2enc] Aspect ratio code: 2 = 4:3 display
    INFO: [mpeg2enc] Frame rate code: 1 = 24000.0/1001.0 (NTSC 3:2 pulldown converted FILM)
    INFO: [mpeg2enc] Bitrate: 2500 KBit/s
    INFO: [mpeg2enc] Quality factor: 6 (Quantisation = 6) (1=best, 31=worst)
    INFO: [mpeg2enc] Field order for input: none/progressive
    INFO: [mpeg2enc] New Sequence every 9999 Mbytes
    INFO: [mpeg2enc] Assuming non-video stream of 260 Kbps
    INFO: [mpeg2enc] Search radius: 16
    INFO: [mpeg2enc] GOP SIZE RANGE 9 TO 15
    INFO: [mpeg2enc] Setting colour/gamma parameters to "unspecified"
    INFO: [mpeg2enc] Progressive format frames = 0
    Unicode font: 242 glyphs.
    default unmodified quantization matrices
    INFO: [mpeg2enc] Buffering 39 frames
    INFO: [yuvscaler] output: frame size: 480x480 pixels (345600 bytes)
    INFO: [yuvscaler] output: frame rate: 2997003/125000 fps (~23.976024)
    INFO: [yuvscaler] output: interlace: none/progressive
    INFO: [yuvscaler] output: sample aspect ratio: ?
    XXX initial v_pts=0.000 a_pos=7440 (0.550)
    *** [vo] Allocating (slices) mp_image_t, 624x352x12bpp YUV planar, 329472 bytes
    INFO: [mpeg2enc] SETTING AltiVec for QUANTIZER!
    INFO: [mpeg2enc] SETTING AltiVec for MOTION!
    INFO: [mpeg2enc] SETTING AltiVec for TRANSFORM!
    INFO: [mpeg2enc] SETTING AltiVec for PREDICTION!
    ber 24835
    uant=6.00 total act=3262723.2
    0
    quant=6.00 total act=3263699.4
    ame number 24845
    =3264380.1
    1.2% 9124 0
    otal act=3264905.0
    total act=3265511.9
    ds_fill_buffer: EOF reached (stream: video)
    EOF code: 1
    Uninit audio filters...
    [libaf] Removing filter dummy
    [libaf] Removing filter format
    uninit audio: mp3lib
    uninit video: ffmpeg
    Exiting... (End of file)
    INFO: [yuvscaler] End of stream!
    INFO: [yuvscaler] Normal exit: end of stream with frame number 61211!
    INFO: [mpeg2enc] Guesstimated final muxed size = 638617656
    wait, encoding to mp2 audio with mp2enc...
    INFO: Opened WAV file, freq = 48000 Hz, channels = 2, bits = 16
    INFO: format = 0x1, audio length = 490143744 bytes
    INFO: slots/frame = 731
    INFO: frac SpF=0.429, tot bitrate=224 kbps, s freq=44.1 kHz
    INFO: Fractional number of slots, padding required
    INFO: System is big endian
    INFO: Avg slots/frame = inf; b/smp = inf; br = inf kbps
    INFO: Encoding with psychoacoustic model 2 is finished
    INFO: The MPEG encoded output file name is "/Volumes/Stuff/Movies/Lost/Lost13/lost113.mpa"
    INFO: [mplex] mplex version 2.2.2 ($Date: 2003/05/13 20:27:15 $)
    INFO: [mplex] File /Volumes/Stuff/Movies/Lost/Lost13/lost113.mpv looks like an MPEG Video stream.
    INFO: [mplex] File /Volumes/Stuff/Movies/Lost/Lost13/lost113.mpa looks like an MPEG Audio stream.
    INFO: [mplex] Video stream 0: profile 4 selected - ignoring non-standard options!
    INFO: [mplex] Found 1 audio streams and 1 video streams
    INFO: [mplex] Selecting SVCD output profile
    INFO: [mplex] Multiplexing video program stream!
    INFO: [mplex] Scanning for header info: Video stream e0 (/Volumes/Stuff/Movies/Lost/Lost13/lost113.mpv)
    INFO: [mplex] VIDEO STREAM: e0
    INFO: [mplex] Frame width : 480
    INFO: [mplex] Frame height : 480
    INFO: [mplex] Aspect ratio : 4:3 display
    INFO: [mplex] Picture rate : 23.976 frames/sec
    INFO: [mplex] Bit rate : 2500000 bits/sec
    INFO: [mplex] Vbv buffer size : 229376 bytes
    INFO: [mplex] CSPF : 0
    INFO: [mplex] Scanning for header info: Audio stream c0 (/Volumes/Stuff/Movies/Lost/Lost13/lost113.mpa)
    INFO: [mplex] MPEG AUDIO STREAM: c0
    INFO: [mplex] Audio version : 1.0
    INFO: [mplex] Layer : 2
    INFO: [mplex] CRC checksums : no
    INFO: [mplex] Bit rate : 28672 bytes/sec (224 kbit/sec)
    INFO: [mplex] Frequency : 44100 Hz
    INFO: [mplex] Mode : 0 stereo
    INFO: [mplex] Mode extension : 0
    INFO: [mplex] Copyright bit : 0 no copyright
    INFO: [mplex] Original/Copy : 0 copy
    INFO: [mplex] Emphasis : 0 none
    INFO: [mplex] SYSTEMS/PROGRAM stream:
    INFO: [mplex] rough-guess multiplexed stream data rate : 2771544
    INFO: [mplex] target data-rate specified : 2788800
    INFO: [mplex] Setting specified specified data rate: 2788800
    INFO: [mplex] Run-in Sectors = 78 Video delay = 46800 Audio delay = 50553
    INFO: [mplex] New sequence commences...
    INFO: [mplex] Video e0: buf= 235520 frame=000000 sector=00000000
    INFO: [mplex] Audio c0: buf= 4096 frame=000000 sector=00000000
    INFO: [mplex] Scanned to end AU 61210
    INFO: [mplex] STREAM e0 completed @ frame 61210.
    INFO: [mplex] STREAM c0 completed @ frame 97724.
    INFO: [mplex] Multiplex completion at SCR=229791600.
    INFO: [mplex] Video e0: buf= 216527 frame=061210 sector=00243693
    INFO: [mplex] Audio c0: buf= 439 frame=097724 sector=00031132
    INFO: [mplex] VIDEO_STATISTICS: e0
    INFO: [mplex] Video Stream length: 555644871 bytes
    INFO: [mplex] Sequence headers: 4177
    INFO: [mplex] Sequence ends : 1
    INFO: [mplex] No. Pictures : 61210
    INFO: [mplex] No. Groups : 4177
    INFO: [mplex] No. I Frames : 4177 avg. size 17770 bytes
    INFO: [mplex] No. P Frames : 16344 avg. size 10716 bytes
    INFO: [mplex] No. B Frames : 40690 avg. size 7526 bytes
    INFO: [mplex] Average bit-rate : 1740800 bits/sec
    INFO: [mplex] Peak bit-rate : 2543600 bits/sec
    INFO: [mplex] BUFFERING min 15 Buf max 181076
    INFO: [mplex] AUDIO_STATISTICS: c0
    INFO: [mplex] Audio stream length 71478857 bytes.
    INFO: [mplex] Syncwords : 97725
    INFO: [mplex] Frames : 55843 padded
    INFO: [mplex] Frames : 41882 unpadded
    INFO: [mplex] BUFFERING min 16 Buf max 746
    INFO: [mplex] MUX STATUS: no under-runs detected.
    (Super) VideoCD xml description created successfully as `/Volumes/Stuff/Movies/Lost/Lost13/lost113-1.mpg.xml'
    ++ WARN: initializing libvcd 0.7.12 [darwin5.2/powerpc]
    ++ WARN:
    ++ WARN:
    (Super) VideoCD xml description created successfully as `/Volumes/Stuff/Movies/Lost/Lost13/lost113:.xml'
    ++ WARN: initializing libvcd 0.7.12 [darwin5.2/powerpc]
    **ERROR: could not stat() file `/Volumes/Stuff/Movies/Lost/Lost13/lost113:': No such file or directory
    ++ WARN:
    ++ WARN:
    Encoding completed on Mon Dec 26 18:53:28 JST 2005
    Quote Quote  
  2. Which is the name of your source file? Does it contain any special character?
    Quote Quote  
  3. Explorer Case's Avatar
    Join Date
    Feb 2004
    Location
    Middle Earth
    Search Comp PM
    I can reproduce this error with very plain filenames.

    It may have to do with the filename creation of the xml file, which contains illegal character ":" before the dot:

    Code:
    ++ WARN: (Super) VideoCD xml description created successfully as `/Volumes/Stuff/Movies/Lost/Lost13/lost113:.xml'
    Quote Quote  
  4. Cheers for the reply,

    the source file is called LostS01x03.avi
    and the path is /Volumes/Stuff/Movies/LostSeason1

    thanks in advance,

    Mal.
    Quote Quote  
  5. Okay, and which was the name you used for your destination file?
    Quote Quote  
  6. the destination file was called lost113
    with the path /Volumes/Stuff/Movies/Lost/Lost13

    cheers
    Quote Quote  
  7. Anyone got any ideas?

    Cheers, mal.
    Quote Quote  
  8. Did you kept the mpg files? You may use the author tool on them to reauthor to SVCD images.
    Quote Quote  
  9. Yes, I have them but used the .img file to burn the svcd.
    Cheers for the info.

    Mal.
    Quote Quote  



Similar Threads