Nero Burn Process Failed message

[reeni928]

I've been trying to burn a movie with Nero Express, and have had little success. I'm using Nero 6.0. I first ripped it with DVD Shrink, and then set it to burn with Nero. It burns the whole thing, until the very end when, at 100%, it suddenly gives me this message.

Invalid field in command.
Could not perform end of Disc-at-once.
Burn process failed.

I thought maybe I'd done something wrong with the burning process when I was transfering the files into Nero, so I did it again. Same message. I thought trying to use Nero, rather than Nero Express, would work, and I found this tutorial at http://www.dvdshrink.info/nero-udf-iso.php and followed it to a T. Still the same message. I don't know what to do.

I saw in this post on the forum at https://www.videohelp.com/forum/archive/t275157.html that using DVDDecrypter might be my best bet, but I couldn't find anything anywhere to tell me why Nero wouldn't be working, except that if I go back to an earlier version of it it should work. I hate to keep wasting DVDs as money is rather tight right now.

I've included the log, I don't know if anyone can help but any insight is greatly appreciated. Should I just got with DVDDecrypter and hope that works? Or is there a specific setting in Nero that is causing this?

The log:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 4/2/2003 8:13:44 AM
Nero version: 6.0.0.0 (Nero Express)
Recorder: <PIONEER DVDRW DVR-K15> Version: 1.11 - HA 1 TA 0 - 6.0.0.0
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <PIONEER DVDRW DVR-K15 >Version: 1.11 - HA 1 TA 0 - 6.0.0.0
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK4025GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVDRW DVR-K15 atapi Port 1 ID 0 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 57671680 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 382MB (391664kB)
Free physical memory: 29MB (29964kB)
Memory in use : 92 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

28.11.2005
UDF/ISO compilation
11:47:33 PM #1 Phase 112 File dlgbrnst.cpp, Line 1818
DVD-Video files reallocation started

11:47:34 PM #2 Phase 114 File dlgbrnst.cpp, Line 1818
DVD-Video files reallocation completed (no file modified)

11:47:34 PM #3 Text 0 File Isodoc.cpp, Line 5451
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

11:47:34 PM #4 Phase 111 File dlgbrnst.cpp, Line 1818
DVD-Video files sorted

11:47:34 PM #5 Text 0 File Reader.cpp, Line 118
Reader running

11:47:34 PM #6 Text 0 File Writer.cpp, Line 127
Writer PIONEER DVDRW DVR-K15 running

11:47:34 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3814
First writeable address = 0 (0x00000000)

11:47:34 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3814
First writeable address = 0 (0x00000000)

11:47:34 PM #9 Text 0 File Burncd.cpp, Line 3081
Turn on Disc-at-once, using DVD media

11:47:38 PM #10 Text 0 File DlgWaitCD.cpp, Line 224
Last possible write address on media: 2295103 (510:01.28)
Last address to be written: 2286127 (508:01.52)

11:47:38 PM #11 Text 0 File DlgWaitCD.cpp, Line 229
Write in overburning mode: FALSE

11:47:38 PM #12 Text 0 File DlgWaitCD.cpp, Line 1688
Recorder: PIONEER DVDRW DVR-K15, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

11:47:38 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 757
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [PIONEER DVDRW DVR-K15 ]
--------------------------------------------------------------

11:47:38 PM #14 Text 0 File Burncd.cpp, Line 3318
Recorder and media-info

=======================

Burning to PIONEER DVDRW DVR-K15 on a DVD+R media

11:47:38 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 910
Prepare recorder PIONEER DVDRW DVR-K15 for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 387330048

11:47:39 PM #16 Phase 24 File dlgbrnst.cpp, Line 1818
Caching of files started

11:47:39 PM #17 Phase 25 File dlgbrnst.cpp, Line 1818
Caching of files completed

11:47:39 PM #18 Phase 36 File dlgbrnst.cpp, Line 1818
Burn process started at 2.4x (3,312 KB/s)

11:47:39 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2104
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

11:47:39 PM #20 Text 0 File Cdrdrv.cpp, Line 7827
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 03 59 55 44 45 4E 30 - 30 30 54 30 32 00 38 23 ..YUDEN000T02.8#
54 37 10 02 4E 72 02 8C - 63 16 16 0B 0B 0A 0A 01 T7..Nr..c.......
19 1B 0C 0C 0C 0D 01 00 - 00 00 00 00 00 00 00 01 ................

11:47:39 PM #21 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 23:51,270 (1431270ms) -> OK

11:47:39 PM #22 Text 0 File DVDPlusRW.cpp, Line 513
Start write address at LBA 0
DVD high compatibility mode: Yes

12:12:02 AM #23 Text 0 File WriterStatus.cpp, Line 112
<PIONEER DVDRW DVR-K15 > start writing Lead-Out at LBA 2286128 (22E230h), lenght 0 blocks

12:12:03 AM #24 Text 0 File ThreadedTransfer.cpp, Line 227
all writers idle, stopping conversion

12:12:04 AM #25 SCSI -1066 File Cdrdrv.cpp, Line 1151
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0xFF 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x24 0x00

12:12:04 AM #26 SCSI -1176 File Cdrdrv.cpp, Line 1151
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x72 0x03

12:12:04 AM #27 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 0:00,000 (0ms) -> OK

12:12:04 AM #28 CDR -1066 File ThreadedTransferInterface.cpp, Line 1594
Invalid field in command

12:12:04 AM #29 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1594
Could not perform end of Disc-at-once

12:12:04 AM #30 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 0:00,000 (0ms) -> OK

12:12:04 AM #31 Text 0 File dlgbrnst.cpp, Line 1678
Set remaining time: 0:00,000 (0ms) -> OK

12:12:04 AM #32 Phase 38 File dlgbrnst.cpp, Line 1818
Burn process failed at 2.4x (3,312 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.27a, size=20576 bytes, created 1/26/2005 4:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 7:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


Anyone have any ideas? Thanks so much!

[jtoolman2000]

You should be telling DVD Shrink to automatically burn the files with Nero. That way there is no possible error that could occur as when manually transfering the dvd files into Nero.

I would simply use Shrink to create an ISO and Decrypter to burn the ISO to a DVD. After the 1st cycle, it is an automatic porcess provided you have two drives to house the original and the blank disc. I get 100% success on three different drives and all sorts of media using that method.

[Krispy Kritter]

My first thought would be hardware failure because the drive is reporting sense errors.

I would also question why it is attempting to burn at 2.4x (assuming you are using quality media that is rated above 2.4x). This is either a software issue, the drive doesn't like that type/brand of media, or related to the sense error.

Have you swapped or installed this drive AFTER installing Nero?

[mats.hogberg]

I'd recommend just creating an ISO with DVDShrink, then burn ISO with DVDDecrypter.

/Mats