Problems with DVD::rip

9th Nov 2005 07:08 #1

Member

Problems with DVD::rip. What's wrong? I configured everything to my best understanding. I can rip to .vob but when I try to transcode to xvid (avi) this happens:

Code:

Job 'Transcoding video - title #2, chapter #10, pass 1' failed.

Executed command: mkdir -m 0775 -p '/mnt/hdb1/Filmer/DVD::rip/Databas-katalog/Gulliver_dvdrip/tmp' && cd /mnt/hdb1/Filmer/DVD::rip/Databas-katalog/Gulliver_dvdrip/tmp && dr_exec transcode -H 10 -a 0 -x vob,null -i /mnt/hdb1/Filmer/DVD::rip/Databas-katalog/Gulliver_dvdrip/vob/002-C010 -w 6000,50 -b 128,0,0 -s 13.908 --a52_drc_off -f 25 -Y 48,8,48,8 -B 12,10,8 -R 1 -y xvid,null -o /dev/null --print_status 20 -J extsub=3:0:0:0:0 && echo DVDRIP_SUCCESS 

Last output was:


transcode v1.0.0 (C) 2001-2003 Thomas Oestreich, 2003-2004 T. Bitterberg
libdvdread: Using libdvdcss version 1.2.9 for DVD access
libdvdread: Couldn't find device name.
libdvdread: Can't open file VIDEO_TS.IFO.
tc_memcpy: using sse for memcpy
[import_null.so] v0.2.0 (2002-01-19) (video) null | (audio) null
[import_vob.so] v0.6.0 (2003-10-02) (video) MPEG-2 | (audio) MPEG/AC3/PCM | (subtitle)
tc_memcpy: using sse for memcpy
[export_null.so] v0.1.2 (2001-08-17) (video) null | (audio) null
[export_xvid4.so] v0.0.5 (2003-12-05) (video) XviD 1.0.x series (aka API 4.0) | (audio) MPEG/AC3/PCM
[export_xvid4.so] Neither './xvid4.cfg' nor '~/.transcode/xvid4.cfg'
[export_xvid4.so] found. Default settings will be used instead.
tc_memcpy: using sse for memcpy
[decode_mpeg2.c] libmpeg2 0.4.0b loop decoder
[decode_mpeg2.c] libmpeg2 acceleration: mmxext
[encoder.c] Delaying audio (0)
[transcode] (probe) suggested AV correction -D 0 (0 ms) | AV -23 ms | -23 ms
[transcode] auto-probing source /mnt/hdb1/Filmer/DVD::rip/Databas-katalog/Gulliver_dvdrip/vob/002-C010 (ok)
[transcode] V: import format    | MPEG-2  (V=vob|A=null)
[transcode] V: AV demux/sync    | (1) sync AV at initial MPEG sequence
[transcode] V: import frame     | 720x576  1.25:1  encoded @ 4:3
[transcode] V: new aspect ratio | 640x480  1.33:1 (-B)
[transcode] V: clip frame (->)  | 624x384
[transcode] V: bits/pixel       | 1.002
[transcode] V: decoding fps,frc | 25.000,0
[transcode] V: multi-pass       | (mode=1) writing data (pass 1) to divx4.log
[transcode] V: Y'CbCr           | YV12/I420
[transcode] A: import format    | 0x2001  AC3/A52      [48000,16,2]  448 kbps
[transcode] A: export           | disabled
[transcode] V: encoding fps,frc | 25.000,3
[transcode] A: bytes per frame  | 7680 (7680.000000)
[transcode] A: adjustment       | 0@1000
[transcode] A: rescale stream   | 13.908
[transcode] A: AV shift         | -23 ms [ 0 (A) | -23 ms ]
[transcode] V: IA32/AMD64 accel | sse3 (sse3 sse 3dnowext 3dnow mmxext mmx asm C)
[transcode] V: video buffer     | 10 @ 720x576
[filter_extsub.so] 0.3.5 (2003-10-15) DVD subtitle overlay plugin
[filter_extsub.so] options=3:0:0:0:0
[filter_extsub.so] extracting subtitle 0x23
[import_vob.so] tccat -i "/mnt/hdb1/Filmer/DVD::rip/Databas-katalog/Gulliver_dvdrip/vob/002-C010" -t vob -d 0 -S 0 | tcdemux -a 3 -x ps1 -S 0 -M 1 -d 0 | tcextract -t vob -a 0x23 -x ps1 -d 0
(subproc.c) extracting subtitle stream 3
[import_vob.so] tccat -i "/mnt/hdb1/Filmer/DVD::rip/Databas-katalog/Gulliver_dvdrip/vob/002-C010" -t vob -d 0 -S 0 | tcdemux -s 0x80 -x mpeg2 -S 0 -M 1 -d 0 | tcextract -t vob -a 0 -x mpeg2 -d 0 | tcdecode -x mpeg2 -d 0 -y yv12
encoding frames [000000-000020],  10.96 fps, EMT: 0:00:00, ( 0| 0| 0) 
encoding frames [000000-000040],  13.65 fps, EMT: 0:00:01, ( 0| 0| 1) 
encoding frames [000000-000060],  15.03 fps, EMT: 0:00:02, ( 1| 0| 0) 
encoding frames [000000-000080],  15.92 fps, EMT: 0:00:03, ( 0| 0| 0) 
encoding frames [000000-000100],  16.34 fps, EMT: 0:00:04, ( 0| 0| 0) 
encoding frames [000000-000120],  16.72 fps, EMT: 0:00:04, ( 0| 0| 0) 
encoding frames [000000-000140],  17.01 fps, EMT: 0:00:05, ( 0| 0| 0) 
unknown ctrl sequence 0x72
unknown ctrl sequence 0x16
unknown ctrl sequence 0x72
unknown ctrl sequence 0x16
unknown ctrl sequence 0x54
unknown ctrl sequence 0x16
unknown ctrl sequence 0x37
unknown ctrl sequence 0xda
unknown ctrl sequence 0xc2
unknown ctrl sequence 0x42
unknown ctrl sequence 0x44
unknown ctrl sequence 0x18
unknown ctrl sequence 0xd0
unknown ctrl sequence 0x26
unknown ctrl sequence 0x8
unknown ctrl sequence 0xf0
unknown ctrl sequence 0x43
unknown ctrl sequence 0x43
unknown ctrl sequence 0xf
unknown ctrl sequence 0xf
unknown ctrl sequence 0xf
unknown ctrl sequence 0xf
unknown ctrl sequence 0x48
unknown ctrl sequence 0x8b
unknown ctrl sequence 0xa
unknown ctrl sequence 0x8
unknown ctrl sequence 0x66
unknown ctrl sequence 0x36
unknown ctrl sequence 0x37
unknown ctrl sequence 0x3d
unknown ctrl sequence 0x8
unknown ctrl sequence 0x8c
unknown ctrl sequence 0xa
unknown ctrl sequence 0x8
unknown ctrl sequence 0xa8
unknown ctrl sequence 0x8d
unknown ctrl sequence 0xa
unknown ctrl sequence 0x8
unknown ctrl sequence 0x38
unknown ctrl sequence 0x9f
unknown ctrl sequence 0xa
unknown ctrl sequence 0x8
unknown ctrl sequence 0xb0
unknown ctrl sequence 0x8e
unknown ctrl sequence 0xa
unknown ctrl sequence 0x8
unknown ctrl sequence 0xf8
unknown ctrl sequence 0x97
unknown ctrl sequence 0xa
unknown ctrl sequence 0x8
sh: line 1: 16020 Dödad                   dr_exec transcode -H 10 -a 0 -x vob,null -i /mnt/hdb1/Filmer/DVD::rip/Databas-katalog/Gulliver_dvdrip/vob/002-C010 -w 6000,50 -b 128,0,0 -s 13.908 --a52_drc_off -f 25 -Y 48,8,48,8 -B 12,10,8 -R 1 -y xvid,null -o /dev/null --print_status 20 -J extsub=3:0:0:0:0

SuSE 9.3 Pro

Quote

9th Nov 2005 13:48 #2

lagu2653

Member

I have Linux SuSE 9.3 Pro. I installed DVD::rip according to this http://www.exit1.org/dvdrip/doc/install.cipp guide. But instead of using the command # make install I tried to use the command # checkinstall. That didn't work. It was looking for some .tgz-file, which I understand is used under Linux Slackware. But I could run it from the install directory /usr/src/packages/SOURCES/DVD::rip/Video-DVDRip-0.52.6 after adding "." to the $PATH. So I ran it until I got problems transcoding. It didn't matter much which format I wanted to transcode it to. I tried divx4, divx5, xvid, xvid2, xvid3, xvid4, ffmpeg. I always got error messages. Sometimes it ran for a while 10 seconds or so. So I decided to try to install the packman .rpm, which required a newer version of rar. So I installed it then I tried to install the DVD::rip rpm. But it said there was a conflict with AcidRip /usr/lib/perl5/5.8.6/i586-linux-thread-multi/perllocal.pod. So instead I added packman as a new source of installation in (YaST2 the GUI version). That worked, there was no conflict when I checked the dependencies in (YaST2 the GUI version) and the package was installed. Then I started the program again. At first I wasn't root. But the I changed to root and had to reconfigure everything. In the global preferences section I didn't get any red error-messages. Even the CD-Rom burning commands was green. Below are the entries I changed:

dvd device: /dev/dvd
dvd mount point: /media/dvdrecorder
default data base directory: /mnt/hdb1/Filmer/DVD::rip/Databas-katalog
default directory for .rip project files: /mnt/hdb1/Filmer/DVD::rip/_rip-projekt-katalog

rar command (for subvob compression): /usr/local/bin/rar

writer device file: /dev/dvd
cdrecord device: 0,0,0
cdrecord command: /usr/X11R6/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD

After saving them I went over to the other window and opened a new project, loaded the titles and chapters from the DVD, selected title 2 chapter 10 which was 3 minutes and 21 seconds long, selected swedish subtitles, xvid3 and tried to transcode. Transcode runs for a few seconds and then fails with an error message. Again it didn't matter mu which format I chose. avi (divx4, divx5, xvid, xvid2, xvid3, xvid4, ffmpeg), mpeg, ogg. It always exited with error messages after 1-10 seconds. Below is one of them:

################################################## ############################
Code:
Job 'Transcoding video - title #2, chapter #10, single pass' failed.

Executed command: mkdir -m 0775 -p '/mnt/hdb1/Filmer/DVD_rip/Databas-katalog/Gulliver_DVD_rip/tmp' && cd /mnt/hdb1/Filmer/DVD_rip/Databas-katalog/Gulliver_DVD_rip/tmp && dr_exec transcode -H 10 -a 0 -x vob -i /mnt/hdb1/Filmer/DVD_rip/Databas-katalog/Gulliver_DVD_rip/vob/002-C010 -w 6000,50 -b 128,0,0 -s 13.908 --a52_drc_off -f 25 -Y 48,8,48,8 -B 12,10,8 -y xvid3 -o /mnt/hdb1/Filmer/DVD_rip/Databas-katalog/Gulliver_DVD_rip/avi/002/Gulliver_DVD_rip-002-C010.avi --print_status 20 -J extsub=3:0:0:0:0 && echo DVDRIP_SUCCESS

Last output was:


transcode v1.0.0 (C) 2001-2003 Thomas Oestreich, 2003-2004 T. Bitterberg
libdvdread: Using libdvdcss version 1.2.9 for DVD access
libdvdread: Couldn't find device name.
libdvdread: Can't open file VIDEO_TS.IFO.
tc_memcpy: using sse for memcpy
[import_vob.so] v0.6.0 (2003-10-02) (video) MPEG-2 | (audio) MPEG/AC3/PCM | (subtitle)
tc_memcpy: using sse for memcpy
[export_xvid3.so] v0.3.12 (2003-07-30) (video) XviD nonumber series (aka API 3.0)  | (audio) MPEG/AC3/PCM
tc_memcpy: using sse for memcpy
tc_memcpy: using sse for memcpy
libxvidcore.so: cannot open shared object file: No such file or directoryFailed to init XviD codec[transcode] warning : (encoder.c) video export module error: init failed
[transcode] (probe) suggested AV correction -D 0 (0 ms) | AV -23 ms | -23 ms
[transcode] auto-probing source /mnt/hdb1/Filmer/DVD_rip/Databas-katalog/Gulliver_DVD_rip/vob/002-C010 (ok)
[transcode] V: import format    | MPEG-2  (V=vob|A=vob)
[transcode] V: AV demux/sync    | (1) sync AV at initial MPEG sequence
[transcode] V: import frame     | 720x576  1.25:1  encoded @ 4:3
[transcode] V: new aspect ratio | 640x480  1.33:1 (-B)
[transcode] V: clip frame (->)  | 624x384
[transcode] V: bits/pixel       | 1.002
[transcode] V: decoding fps,frc | 25.000,0
[transcode] V: Y'CbCr           | YV12/I420
[transcode] A: import format    | 0x2001  AC3/A52      [48000,16,2]  448 kbps
[transcode] A: export format    | 0x55    MPEG layer-3 [48000,16,2]  128 kbps
[transcode] V: encoding fps,frc | 25.000,3
[transcode] A: bytes per frame  | 7680 (7680.000000)
[transcode] A: adjustment       | 0@1000
[transcode] A: rescale stream   | 13.908
[transcode] A: AV shift         | -23 ms [ 0 (A) | -23 ms ]
[transcode] V: IA32/AMD64 accel | sse3 (sse3 sse 3dnowext 3dnow mmxext mmx asm C)
[transcode] V: video buffer     | 10 @ 720x576
[filter_extsub.so] 0.3.5 (2003-10-15) DVD subtitle overlay plugin
[filter_extsub.so] options=3:0:0:0:0
[filter_extsub.so] extracting subtitle 0x23
[import_vob.so] tccat -i "/mnt/hdb1/Filmer/DVD_rip/Databas-katalog/Gulliver_DVD_rip/vob/002-C010" -t vob -d 0 -S 0 | tcdemux -a 3 -x ps1 -S 0 -M 1 -d 0 | tcextract -t vob -a 0x23 -x ps1 -d 0
(subproc.c) extracting subtitle stream 3
[import_vob.so] tccat -i "/mnt/hdb1/Filmer/DVD_rip/Databas-katalog/Gulliver_DVD_rip/vob/002-C010" -t vob -d 0 -S 0 | tcdemux -a 0 -x ac3 -S 0 -M 1 -d 0 | tcextract -t vob -a 0 -x ac3 -d 0 | tcdecode -x a52 -d 0 -A 1
[import_vob.so] tccat -i "/mnt/hdb1/Filmer/DVD_rip/Databas-katalog/Gulliver_DVD_rip/vob/002-C010" -t vob -d 0 -S 0 | tcdemux -s 0x80 -x mpeg2 -S 0 -M 1 -d 0 | tcextract -t vob -a 0 -x mpeg2 -d 0 | tcdecode -x mpeg2 -d 0 -y yv12
[transcode] critical: failed to init encoder
[decode_mpeg2.c] libmpeg2 0.4.0b loop decoder
[decode_mpeg2.c] libmpeg2 acceleration: mmxext
################################################## ############################

Is there a problem with having colons in the filename "DVD::rip". When I installed all the rpms needed for dvd::rip, from the commandline, the packages was in subdirectories named "DVD::rip".

Thanks in advance, Lars